1. Introduction
The XTOOL TP150 is a specialized inspection device designed for automotive tire pressure diagnosis. It integrates tire pressure programming, diagnosis, and matching functionalities. This tool supports the activation of both 315MHz and 433MHz tire pressure sensors, offers diagnostic capabilities for thousands of vehicle models, and can wirelessly program 1-8 XTOOL TS100 universal programmable tire pressure sensors.
Key Features:
- Works on Both 315MHz & 433MHz Sensors
- Relearn All TPMS Sensors
- Activate All TPMS Sensors
- Check ECU-ID Matching Status
- Check Sensor Real-Time Data
- Program XTOOL TS100 Sensors
- Program Multiple Sensors Simultaneously
- Diagnose TPMS System: Read and clear TPMS codes
- Reset TPMS Warning Light
- Check OE Sensor Information (Brand, Part No., Frequency)
- Test Records
- Built-In Rechargeable Battery
- Internet Update via WIFI and USB Connection
- Lifetime Software Updates

2. What's in the Box
The XTOOL TP150 package includes the following components:
- 1PC X TP150 Host
- 1PC X Charger for Tablet
- 1PC X Charger US Adapter
- 1PC X Charger EU Adapter
- 1PC X Charger EN Adapter
- 1PC X Main Cable
- 1PC X USB Type-C Cable
- 1PC X Carton
- 1PC X Certificate of Quality
- 1PC X User Manual

3. Setup Guide
3.1 Initial Power On
To power on the device, press and hold the power button until the XTOOL logo appears on the screen.
3.2 Language Settings
The XTOOL TP150 supports multiple languages including Arabic, English, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, and Spanish. To change the language:
- From the main menu, select 'Options'.
- Navigate to 'Language' and select your desired language.
- After changing the language, it is recommended to perform a software update to ensure all translations are applied correctly.
3.3 WiFi Connection
A stable WiFi connection is essential for software updates and certain diagnostic functions.
- From the main menu, select 'Options'.
- Choose 'WiFi connection'.
- The device will scan for available networks. Select your network and enter the password if required.
3.4 Unit Settings
You can customize the display units for pressure, temperature, and ID format:
- Pressure Unit Setting: Choose between PSI, kPa, or Bar.
- Temperature Unit Setting: Select between °C (Celsius) or °F (Fahrenheit).
- ID Format Setting: Choose between Auto, Decimal, or Hexadecimal.
These settings can be accessed via the 'Options' menu.
4. Operating Instructions
4.1 TPMS Sensor Activation and Status Check
The TP150 can activate 98% of OE/XTOOL/programmed aftermarket TPMS sensors (315/433MHz) across American, Asian, and European vehicles. This allows you to view real-time sensor data without needing to visit a dealership.
- Select 'TPMS' from the main menu.
- Choose the correct vehicle make, model, and year.
- Follow the on-screen prompts to activate the sensors.
- Once activated, the tool will display real-time sensor data including:
- Sensor ID
- Tire Pressure
- Tire Temperature
- Sensor Battery Status
- Sensor Position
- Frequency

4.2 TPMS Sensor Programming
The XTOOL TP150 can program XTOOL TS100 sensors ONLY. It does NOT program other brands of sensors. This function is used to replace broken sensors or to meet specific vehicle requirements before installation and relearn.
There are four methods for programming XTOOL TS100 sensors:
- Automatic ID Generation: Automatically creates a new unique ID for the TS100 sensor. This method is useful if the original sensor ID is unknown or the original sensor is faulty. After programming, a TPMS relearn procedure is required.
- Manual Input ID: Allows you to manually enter the ID into the new TS100 sensor. The ID can usually be found on the original sensor. Choose this if the original sensor cannot be activated and the tire/sensor position has not changed.
- Copy ID by Activation: Trigger the original sensor to obtain its ID, then copy this ID to the new sensor. This method is suitable if the original sensor is functional and can be activated, and the tire/sensor position remains unchanged.
- Copy ID by OBD: Diagnose the vehicle's TPMS system via the OBD port to retrieve the ID, then copy it to the new sensor. Use this if the original sensor is missing but its ID can be read from the car's ECU after diagnosis, and the tire/sensor position has not changed.

4.3 TPMS Sensor Relearn
When new sensors are installed, the TPMS light may activate due to ID mismatches. Relearning the TPMS ensures the new sensors are correctly recognized by the vehicle's system. The TP150 provides step-by-step guidance for various relearn procedures:
- Automatic Relearn: Drive the vehicle at or above 25 km/h (15 mph) for 20 minutes with all tires inflated to standard pressure. The sensors should be automatically recognized.
- OBD Relearn: Connect the tool to the OBD port and select 'OBD Relearn' to write sensor IDs into the system.
- Separate Activation: Enter relearn mode and activate each sensor individually for the vehicle to recognize them.
- Copy Sensors ID: If sensor IDs are unchangeable, ensure they match the originals. Use the 'Programming' menu on XTOOL TS100 sensors to copy IDs if needed.
Note: Some vehicles may require additional steps beyond those introduced. Always refer to the guide shown on the device when performing actual programming.

4.4 TPMS System Diagnostics
The TP150 helps you efficiently diagnose and troubleshoot TPMS problems.
- TPMS System Health Check: Provides an overall assessment of the TPMS system's status.
- Read/Clear TPMS DTCs: Read and clear diagnostic trouble codes related to the TPMS system.
- Reset TPMS Warning Light: Turn off the TPMS warning light after issues are resolved.
- Sensor ID/Battery Check: Verify sensor IDs and check battery conditions.

5. Maintenance
5.1 Software Updates
The XTOOL TP150 offers lifetime free software updates to ensure continuous access to new functions and optimized performance. Updates are performed via WiFi.
- Ensure the device is connected to a stable WiFi network (refer to Section 3.3).
- From the main menu, select 'Upgrade'.
- Choose 'WiFi Upgrade'.
- The device will check for available updates. Follow the on-screen instructions to download and install.
- Keep the device charging during the entire updating process to prevent interruption.

6. Troubleshooting
6.1 Common Issues & Solutions
- Device not powering on: Ensure the device is fully charged. Connect it to the charger and try again.
- WiFi connection issues: Verify your WiFi password and network stability. Try restarting the device and your router.
- Sensor not activating: Ensure the sensor is within range and properly installed. Check the sensor's battery status.
- Inaccurate readings: Ensure tires are inflated to the correct pressure. Check for physical damage to sensors.
- Language display issues after changing: Perform a software update after changing the language to ensure all interface elements are translated.
6.2 Vehicle Compatibility
The XTOOL TP150 supports a broad range of car models from 1996-2025, covering approximately 99% of vehicles. However, specific compatibility can vary. If you are unsure about your vehicle, please refer to the XTOOL official website's function query tool or contact XTOOL technical support with your car's brand, model, year, and VIN.

7. Specifications
| Feature | Description |
|---|---|
| Display Screen | 320x480 DPI TFT |
| Battery Capacity | 3000mAh 3.7V lithium |
| Communication Method | Wired |
| Update Method | Connect WiFi to Update |
| Interface | USB Type-C, DB15 |
| Working Temperature | -10℃ ~ 60℃ |
| Storage Temperature | -20℃ ~ 70℃ |
| Weight | 0.4 KG |
| Size | 200 × 92 × 33 mm |
| Special Features | Wifi |
| Software Update | Yes (Lifetime Free) |
| Language Support | Arabic, English, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish |
| Software Version | 2025 |
| Hardware Version | 2025 |
| Certification | CE |

8. User Tips
- Language Change: If you need to change the device language, first switch the language in the settings menu, then perform a software update to ensure all interface elements are correctly translated.
- Vehicle Compatibility: Before purchasing or using for a new vehicle, it is recommended to verify compatibility. You can check the XTOOL official website's function query tool or contact XTOOL technical support with your car's brand, model, year, and VIN.
- Sensor Programming: Remember that the XTOOL TP150 is designed to program XTOOL TS100 sensors ONLY. It does not support programming sensors from other brands.
9. Warranty and Support
XTOOL is committed to providing high-quality products and excellent customer service.
- Warranty: The XTOOL TP150 comes with a 3-year warranty.
- Software Updates: Enjoy lifetime free software updates online.
- Technical Support: Lifetime free technical support is provided.
- Customer Service: 24-hour online customer service is available for any inquiries or assistance.
- Authenticity: All products from the XTOOL Official Store are 100% original and authentic, verifiable through the product's serial number (S/N).
