Hikvision DS-KH6350-WTE1

Contents

Hikvision DS-KH6350-WTE1 IP Video Intercom Indoor Station User Manual

7-inch WIFI Monitor Screen with Mobile App Unlock Function

1. Product Overview

The Hikvision DS-KH6350-WTE1 is a 7-inch IP Video Intercom Indoor Station designed for seamless communication and access control within residential or commercial environments. It features a user-friendly interface, Wi-Fi connectivity, and remote unlocking capabilities via a mobile application.

Key Features

  • 7-inch TFT capacitive touch screen with 1024 × 600 resolution.
  • New UI V2.0 for user-friendly operation.
  • Convenient Hik-Connect APP Mobile Control for remote access.
  • Receive calls, open the door, and view live video remotely.
  • Easy wizard for quick setup without requiring a PC.
  • Configure the entire system directly on the touch screen.
  • Live view of the door station and linked cameras in public areas.
  • Supports voice messages when no response from the indoor station.
  • Receives alarms by linkage with an alarm system and notifies the center.
  • Elevator access control functionality.
  • Standard Power over Ethernet (PoE) support.
  • Stores messages and captures pictures in the TF card (Max 128GB).

Product Visuals

Video: Overview of the DS-KH6350-WTE1 Indoor Station and its packaging.

Hikvision DS-KH6350-WTE1 7-inch IP Video Intercom Indoor Station

Image: Front view of the Hikvision DS-KH6350-WTE1 Indoor Station.

2. Setup and Installation

This section provides detailed instructions for the physical installation and initial setup of your DS-KH6350-WTE1 Indoor Station.

Before You Start

  • Verify that the device and all assembly parts are included and in good condition.
  • Ensure the power supply is 12 VDC or that standard PoE is available. Confirm the power supply matches your indoor station's requirements.
  • Review the product specifications for environmental considerations.

Physical Interfaces

Familiarize yourself with the device's ports and components:

DS-KH6350-WTE1 Digital Interfaces and Wiring Diagram

Image: Diagram showing the digital interfaces, terminal wiring, and installation steps for the DS-KH6350-WTE1.

Digital Interfaces
No.Interface
1Screen
2Microphone
3Network Interface
4Loudspeaker
5Power Supply Terminal
6R-485 (Received)
7R-485 (Transmitted)
8Grounding Port

Terminal and Wiring

  • **Alarm Input:** Connect any alarm input device to the alarm input terminal and GND on the indoor station.
  • **Grounding Interface:** Connect the grounding interface to a suitable grounding wire.

Installation Steps (Wall Mounting)

The device supports installation with two types of gang boxes. Ensure the hole in the wall is slightly larger than the chosen gang box.

For Gang Box (Type I)

  1. Cut a hole in the wall.
  2. Install the Type I gang box (100 mm L × 100 mm W × 35 mm D) into the drilled hole.
  3. Secure the gang box to the wall with screws.
  4. Connect the necessary cables to the indoor station.
  5. Mount the indoor station to the wall mounting plate by inserting the tabs and pushing until it clicks securely.

For Gang Box (Type II)

  1. Cut a hole in the wall.
  2. Install the Type II gang box (105 mm L × 105 mm W × 38.5 mm D) into the drilled hole.
  3. Secure the gang box to the wall with screws.
  4. Connect the necessary cables to the indoor station.
  5. Mount the indoor station to the wall mounting plate by inserting the tabs and pushing until it clicks securely.

3. Operating Instructions

The DS-KH6350-WTE1 features a user-friendly interface for easy operation.

Initial Setup Wizard

Upon first power-on, the device will guide you through a quick setup wizard to configure essential settings such as network, time, and basic intercom parameters. Follow the on-screen prompts.

Making and Receiving Calls

  • To make a call: Use the touch screen to select the desired outdoor station or indoor extension and initiate a call.
  • To receive a call: When an incoming call is detected, the screen will display the caller. Tap to answer.

Door Unlocking

  • During an active call with an outdoor station, an unlock icon will appear on the screen. Tap this icon to remotely unlock the door.
  • Remote unlocking is also possible via the Hik-Connect mobile application.

Live View

Access live video feeds from connected door stations and other linked cameras (e.g., public area cameras) directly from the indoor station's interface.

Hik-Connect Mobile App Control

Download and install the Hik-Connect app on your smartphone. Pair your indoor station with the app to enable remote functionalities:

  • Receive intercom calls on your mobile device.
  • Remotely unlock doors from anywhere.
  • View live video streams from connected cameras.

Voice Messages and Picture Capture

The device can store voice messages and capture pictures to the inserted TF card, providing a record of visitors or events when you are unavailable.

Alarm System Integration

The indoor station can be linked with an alarm system. In case of an alarm event, it will receive notifications and can relay them to a central monitoring system for timely handling.

4. Maintenance

Regular maintenance ensures optimal performance and longevity of your Hikvision DS-KH6350-WTE1 Indoor Station.

  • **Cleaning:** Use a soft, dry cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents that could damage the surface.
  • **Software Updates:** Periodically check for firmware updates from Hikvision to ensure your device has the latest features and security patches. Updates can typically be performed via the device's settings or through the Hik-Connect app.
  • **TF Card Management:** Regularly review and manage the content on your TF card to prevent it from becoming full. Back up important recordings and delete unnecessary files.
  • **Power Cycle:** If the device experiences minor issues, try power cycling it by disconnecting and reconnecting the power supply.

5. Troubleshooting

This section addresses common issues you might encounter with your indoor station.

No Power

  • Check if the power adapter is securely connected to the device and a working power outlet.
  • If using PoE, ensure the network cable is properly connected to a PoE-enabled switch or injector.
  • Verify the power source is active.

No Video/Audio During Call

  • Ensure the network connection is stable.
  • Check the microphone and loudspeaker settings on both the indoor station and the connected outdoor station.
  • Verify that the outdoor station is functioning correctly.

Cannot Unlock Door Remotely

  • Confirm that the indoor station is properly connected to the door lock mechanism.
  • Check the wiring for the door lock control.
  • Ensure the Hik-Connect app is connected to the device and has the necessary permissions.

Wi-Fi Connection Issues

  • Ensure the Wi-Fi network is active and within range.
  • Verify the Wi-Fi password entered is correct.
  • Try restarting your Wi-Fi router and the indoor station.

General Malfunction

  • Perform a factory reset (refer to the device's settings for this option, as it will erase all configurations).
  • If issues persist, contact customer support.

6. Specifications

Detailed technical specifications for the DS-KH6350-WTE1 Indoor Station.

DS-KH6350-WTE1 Specifications Table 1

Image: Detailed specifications for system, display, video, and audio parameters.

DS-KH6350-WTE1 Specifications Table 2

Image: Detailed specifications for capacity, network, device interfaces, and general parameters.

System Parameters
FeatureSpecification
Operating SystemEmbedded Linux
ROM32 MB
RAM128 MB
CPUEmbedded processor
Display Parameters
FeatureSpecification
Screen Size7-inch colorful TFT screen
Operation MethodCapacitive touch screen
TypeColorful TFT screen
Resolution1024 × 600
Audio Parameters
FeatureSpecification
Audio CompressionG.711 U, G.711 A
Audio InputBuilt-in omnidirectional microphone
Audio OutputBuilt-in loudspeaker
Audio Compression Bitrate64 Kbps
Audio QualityNoise suppression and echo cancellation
Volume AdjustmentAdjustable
Network Parameters
FeatureSpecification
Communication ProtocolTCP/IP, SIP, RTSP
Wired Network10/100 Mbps self-adaptive
Wi-Fi StandardWi-Fi 802.11 b/g/n
Device Interfaces
InterfaceQuantity/Capacity
Alarm Input8-ch
Network1 RJ-45 10/100 Mbps
RS-4851
TF CardMax 128 GB
Alarm Output2
Power Interface1
General
FeatureSpecification
Buttons0
InstallationWall mounting, table mounting
Weight (with package)683 g
Weight (without package)355 g
Working Temperature-10 °C to 50 °C (14 °F to 122 °F)
Working Humidity10% to 90%
Dimensions175 mm × 113.5 mm × 21 mm (6.9" × 4.5" × 0.83")
Application EnvironmentIndoor
Power Consumption≤ 8 W
CertificationsCE, FCC

7. Warranty and Support

The Hikvision DS-KH6350-WTE1 Indoor Station comes with a 2-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

Customer Support

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your authorized Hikvision dealer or the seller from whom you purchased the product.

8. User Tips

Based on available user feedback and common inquiries:

  • No specific user tips were found from the provided reviews or Q&A content. Users generally find the device reliable and functional.

© 2023 Hikvision. All rights reserved.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.