1. Introduction
This manual provides essential information for the safe and efficient use of your TNCE Smart EU Plug. Please read it thoroughly before installation and operation.

2. Safety Warnings and Precautions
2.1. Electrical Hazard Warning
WARNING: FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, SERIOUS PERSONAL INJURY, OR DAMAGE TO THE PRODUCT.
- This socket has a maximum load of 20A/2200W. DO NOT connect appliances exceeding this rating (e.g., space heaters, air conditioners). Overloading can cause overheating and fire.
- DO NOT use if the wall outlet is loose or damaged.
- Always hold the plug body when plugging or unplugging. NEVER pull the power cord.
2.2. Environmental & Water Exposure Warning
WARNING: THIS PRODUCT IS NOT WATERPROOF.
- NEVER use in damp or wet locations (e.g., bathrooms, kitchens, outdoors, near swimming pools).
- NEVER allow liquids of any kind to splash or soak into the socket. If this occurs, IMMEDIATELY disconnect power at the main supply and stop using the product.
- Use only in a dry, well-ventilated, and cool place. Keep away from heat sources, open flames, and direct sunlight.
2.3. Usage and Child Safety Warning
- Ensure the socket and connected cords are out of reach of children during use. This is not a toy.
- DO NOT disassemble, modify, drop, or subject the product to strong impacts.
3. Package Contents
Please verify your package includes the following items:
- EU20 Smart Wi-Fi Socket × 1
- User Manual (this booklet) × 1
4. Quick Start Guide (Setup)
4.1. Physical Connection
- Firmly plug the smart socket into a standard wall outlet (100-240V).
- The indicator light will turn on (e.g., solid red).
4.2. Download the App
Download and install a compatible smart home app (e.g., "Smart Life" or "Tuya Smart") from your phone's app store.
4.3. Network Configuration (Pairing)
Ensure your phone is connected to a 2.4GHz Wi-Fi network. This product is not compatible with 5GHz Wi-Fi networks.
- Open the app, then register or log in to your account.
- Tap "+" or "Add Device", then select the "Socket" category.
- Follow the in-app guide. Press and hold the socket's physical button for about 10 seconds until the indicator light blinks rapidly (Pairing Mode).
- Enter your Wi-Fi password in the app.
- Wait about 30 seconds for connection. Success is indicated by a solid light.
4.3.1. Zigbee Version Specifics
For the Zigbee version, a Zigbee 3.0 gateway (hub) is required for full functionality. The gateway needs to be purchased separately. The Zigbee version supports zigbee2mqtt and Home Assistant protocols. (Refer to Video 1 for a demonstration of Zigbee pairing, including common issues and solutions).

5. Detailed Operating Guide
5.1. Local Control
Briefly press the socket's physical button to turn power on/off manually.
5.2. Remote Control (App Control)
Use the companion app (Smart Life or Tuya Smart) to control the socket from anywhere, as long as your smartphone has network access (WiFi or 4G signal).

5.3. Voice Control
Link the smart plug with smart speakers such as Amazon Alexa or Google Home via the app for voice commands. For example, "Google, turn on the lights."

5.4. Smart Scenes and Automation
Create automations within the app, including:
- Schedules: Set specific times for the plug to turn on or off.
- Countdown Timers: Set a countdown for the device to power off automatically, useful for preventing overcharging or for temporary appliance use.
- Other Device Triggers: Configure rules based on other smart devices in your home.


5.5. Power Monitoring
The smart plug provides real-time reports on the energy consumption of connected appliances. This feature helps you monitor and manage electricity usage, potentially reducing electricity bills.

5.6. Family Sharing & Group Control
The app allows you to share control of the smart plug with family members, eliminating the need for individual setup. The main account holder can grant permissions to other family members to enjoy smart home features together.

6. Indicator Light Status
| Indicator Status | Meaning | Required Action |
|---|---|---|
| Solid Red | Powered, Not Connected to Wi-Fi | Proceed with network setup (Section 4.3) |
| Fast Blinking Red | In Pairing Mode | Complete setup in the app |
| Solid Blue/Green | Connected, Operating Normally | Normal operation |
| Light Off | No Power/Switched Off | Check main power supply |
7. Maintenance and Reset
7.1. Cleaning
- Always unplug the smart plug before cleaning.
- Use only a dry, soft cloth.
- Do not use liquids or cleaners.
7.2. Resetting to Factory Settings
To reset Wi-Fi/factory settings:
- While powered, press and hold the physical button for 10-15 seconds.
- The indicator light will blink rapidly and then reset.
8. Troubleshooting
- **Device fails to pair (Zigbee version)**: Ensure you are using a Zigbee 3.0 gateway. Some older Tuya Zigbee gateways may not be compatible. The device requires a Zigbee 3.0 gateway for proper pairing and functionality. Refer to Video 1 for a demonstration of Zigbee pairing, including common issues and solutions.
- **Device fails to pair (WiFi version)**: Ensure your router is broadcasting a 2.4GHz Wi-Fi signal. The smart plug is not compatible with 5GHz Wi-Fi networks.
- **No power**: Check the main power supply to the wall outlet.
- **Settings lost after power outage**: The smart plug is designed to retain its settings even after a power interruption. If settings are lost, try resetting the device and re-pairing.
9. User Tips
- **Optimal Wi-Fi Signal**: For the best Wi-Fi performance, avoid installing the smart plug inside metal enclosures, which can interfere with the signal.
- **High-Power Appliances**: While the plug supports up to 20A/2200W, it is generally advised not to frequently plug/unplug high-power appliances to prolong the life of both the appliance and the smart plug.
- **Extended Storage**: If the smart plug will be unused for an extended period, unplug it from the wall outlet.
- **Cyclic Timers**: The timer function supports cyclic on/off schedules, allowing for advanced automation like "30 minutes on, 2 hours off".
10. Technical Specifications
| Attribute | Value |
|---|---|
| Product Name | EU20 Smart Wi-Fi Socket |
| Model | EU251 |
| Input Voltage | AC 100-240V, 50/60Hz |
| Rated Current | 16A / 20A (depending on version) |
| Max Load | 2200W |
| Wireless Protocol | Wi-Fi IEEE 802.11b/g/n (2.4GHz) / Zigbee 3.0 (depending on version) |
| Operating Temperature | 0°C to 40°C |
| Installation Type | Wall Mounted |
| Is Smart Device | Yes |
| Features | Automatically Power On and Off, Remote Control, Power Monitoring, Timing Function |
| Protection Class | IP 20 |
| Number of slots | 1 |
| Application | Residential / General-Purpose |
| Certification | CE |
11. Compliance
This product complies with essential EU requirements and relevant international standards, including but not limited to:
| Standard Type | Standard Number & Date |
|---|---|
| Electrical Safety | EN IEC 62368-1:2020+A11:2020 |
| EMC & Radio | ETSI EN 301489-1 V2.2.3(2019-11) ETSI EN 301489-17 V3.2.4(2020-09) ETSI EN 300328 V2.2.2(2019-07) |
| Human Exposure | EN 62311:2020 |
| Substance Restrictions (RoHS) | IEC 62321-3-1:2013 IEC 62321-4:2013+AMD1:2017 IEC 62321-5:2013 IEC 62321-6:2015 IEC 62321-7-1:2015 IEC 62321-7-2:2017 IEC 62321-8:2017 |

12. Warranty and Support
12.1. Warranty
This product is covered by a limited warranty. Damage resulting from misuse, liquid ingress, or unauthorized modification is not covered under this warranty.
12.2. Further Assistance
For further assistance or detailed inquiries, please refer to the full user manual PDF available at: User Manual (PDF).
13. Frequently Asked Questions (FAQ)
- Q: What are the distinctive features of this smart plug?
- A: Its distinctive features include automatic power on/off, remote control via app, voice control with smart assistants, power monitoring, and timing functions.
- Q: Can I set a cyclic on/off timer, for example, 30 minutes on, 2 hours off?
- A: Yes, the app's timer function allows for flexible and cyclic on/off schedules.
- Q: Is it compatible with 5G Wi-Fi?
- A: No, the smart plug is only compatible with 2.4GHz Wi-Fi networks.
- Q: Do the settings get lost if the power goes out?
- A: No, the smart plug is designed to retain its settings even after a power interruption.
- Q: Can this socket be controlled by astronomical events like sunrise and sunset?
- A: This functionality depends on the features offered by the specific smart home app (e.g., Smart Life, Tuya Smart) and its integration capabilities. Many smart home platforms support such advanced automations.
- Q: Do I get a warning to the Tuya application if there is a power failure?
- A: This feature depends on the specific settings and notifications configured within the Tuya app and your internet connection status. Some apps can send notifications for device status changes.
- Q: What is the standby consumption of the plug itself?
- A: Specific standby power consumption details are not provided in the available documentation. Smart plugs typically have very low standby power consumption.