Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your APTX HD QCC5125 LDAC Wireless Adapter Bluetooth 5.1 Receiver Board. This high-fidelity audio decoder board is designed to deliver superior sound quality through advanced Bluetooth codecs and a high-performance DAC chip. Please read this manual thoroughly before use to ensure proper functionality and to maximize your audio experience.
Safety Information
- Power Supply: This device requires a DC power supply in the range of 8-32VDC. AC power supply is NOT supported. Using an incorrect power supply may damage the device and void the warranty.
- Assembly: The acrylic shell components require self-assembly. Handle components carefully to avoid damage.
- Environment: Avoid exposing the device to moisture, extreme temperatures, or direct sunlight.
- Handling: Do not attempt to modify or repair the device yourself. Refer all servicing to qualified personnel.
Package Contents
Please check the package for the following items:
- Bluetooth Receiver Board (QCC3034 or QCC5125 variant)
- Acrylic Shell Components
- Magnetic Column/Attachment Hardware
- 2x XH2.54-2P Power Cables
- 2x XH2.54-3P Shielded Cables
- 3*4 Screws
- M3*14+4 Copper Pillars
- (Optional, depending on purchase) Bluetooth Antenna
Product Overview
The TKXEC Bluetooth Receiver Board is a versatile audio solution featuring advanced Qualcomm Bluetooth chips (QCC3034 or QCC5125) and a PCM5102A DAC for exceptional sound quality. It supports various high-definition audio codecs including aptX HD and LDAC (QCC5125 variant).
Key Features:
- Extended Range: Equipped with an on-board Bluetooth antenna offering an open transmission distance of approximately 50 meters. A reserved IPEX connector allows for an optional external antenna, recommended for installations within metal enclosures to prevent signal shielding.
- I2S Output: Features an I2S output interface for direct connection to power amplifiers with I2S input functionality.
- Button Extension: Includes a button extension interface for external controls, enabling functions such as track switching (up/down), pause/play, and volume adjustment.
- USB-C Connectivity: A Type-C USB interface serves as both a PC sound card connection and an alternative power supply input. For the QCC5125 model, official software can be utilized via USB for advanced EQ operations on the internal DSP, suitable for experienced audio enthusiasts.
- High-Fidelity Audio: Utilizes QCC525/QCC3034 and PCM5102A for lossless transmission and decoding, ensuring pristine sound dynamics, rich detail, clear high frequencies, strong mid-range, and elastic low frequencies. Achieves a dynamic range of 112dB, signal-to-noise ratio of 112dB, and distortion of -93dB.
- Premium Components: Incorporates high-quality capacitors (e.g., Nichicon HIFI audio, ELNA blue robe, KingBox solid state) to optimize performance, reduce noise, and enhance the overall audio quality and lifespan of the device.
Specifications
| Feature | Description |
|---|---|
| Brand Name | TKXEC |
| Wireless Type | Bluetooth |
| Bluetooth Chip | QCC3034 (Bluetooth 5.0) / QCC5125 (Bluetooth 5.1) |
| DAC Chip | PCM5102A (32bit, 384KHz sampling rate) |
| Supported Audio Formats (QCC3034) | SBC, AAC, APTX, APTX-LL, APTX-HD |
| Supported Audio Formats (QCC5125) | SBC, AAC, APTX, APTX-LL, APTX-HD, LDAC |
| Interface | 3.5 MM (Audio Input/Output ports), Type-C USB |
| Power Supply | DC 8-32V (AC not supported) |
| High Definition Support | None (refers to video, not audio) |
| Sound Track | Double (Stereo) |
| Support Memory Card | No |
| Dynamic Range | 112dB |
| Signal-to-Noise Ratio | 112dB |
| Distortion | -93dB |
| Dimensions (L x W x H) | 74mm x 40mm x 25mm |
| Net Weight | 63g |
| Weight with Packaging | 83g |
Setup
1. Shell Assembly
The acrylic shell provides protection and a finished look for the board. It requires simple self-assembly.
- Carefully place the main circuit board (motherboard) onto the magnetic columns.
- Align the acrylic top shell with the copper pillars.
- Secure the acrylic shell using the provided 3*4 screws.
2. Wiring Connections
Connect the board to your audio system and power supply using the provided cables.
- Power Supply (DC8-32V): Connect the provided XH2.54-2P power cable to the designated power input port on the board. Connect the other end to a compatible DC 8-32V power source. Ensure AC power is NOT used.
- Audio Output Port: Use the provided XH2.54-3P shielded cables to connect the audio output port of the board to the audio input port of your power amplifier or front stage board.
- Audio Input Port (AUX): For external audio sources (e.g., mobile phones, TV boxes), connect them to the audio input port.
- USB (Type-C): Connect a Type-C USB cable to this port for either PC sound card functionality or as an alternative power supply.
- External Buttons (Optional): If you wish to add external control buttons, refer to the wiring diagram below. Connect buttons for NEXT/VOL+, PREV/VOL-, PLAY/PAUSE, and a common (COM) line to the corresponding pins on the board.
- External Bluetooth Antenna (Optional): If installing the board in a metal enclosure, it is highly recommended to connect an external Bluetooth antenna to the reserved IPEX connector to improve signal reception and range.
Operating Instructions
1. Power On
Once all connections are secure and the correct DC 8-32V power supply is connected, the board will power on. An indicator light will illuminate.
2. Bluetooth Pairing
- Ensure the Bluetooth receiver board is powered on.
- On your mobile device (smartphone, tablet, etc.), navigate to the Bluetooth settings.
- Enable Bluetooth scanning for new devices.
- Locate and select "Wuzhi Audio" from the list of available devices.
- If prompted, confirm the pairing on your mobile device.
- Once successfully paired, your mobile device should indicate a connection, often displaying "aptX HD" or "LDAC" if your device supports these codecs and the QCC5125 variant is used.
3. Audio Source Switching
The board uses a signal relay to switch between AUX input and Bluetooth. Bluetooth takes priority. If no Bluetooth device is connected, the board will automatically switch to the AUX input.
4. PC Sound Card Mode
Connect the Type-C USB port to your PC. The operating system should automatically detect the board as an external sound card. You can then select it as your audio output device in your PC's sound settings.
5. External Button Control (if connected)
If you have connected external buttons as per the setup instructions, you can use them to control playback:
- NEXT/VOL+: Short press for next track, long press for volume up.
- PREV/VOL-: Short press for previous track, long press for volume down.
- PLAY/PAUSE: Press to play or pause audio.
User Tips
- Galvanic Isolation: For optimal audio performance and to prevent potential ground loops or noise, especially when integrating into existing audio systems, consider implementing galvanic isolation for the power circuits.
- External Antenna for Metal Enclosures: If you install the board inside a metal case, the on-board antenna's performance may be significantly reduced. Utilizing an external Bluetooth antenna connected to the reserved IPEX connector is highly recommended to maintain good signal strength and range.
- QCC5125 DSP EQ: For users with the QCC5125 variant and sufficient technical expertise, the Type-C USB port allows connection to official software for performing Equalizer (EQ) operations on the internal Digital Signal Processor (DSP). This offers advanced audio customization.
Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| No Power / Device not turning on |
|
| Cannot connect via Bluetooth / Poor range |
|
| No audio output |
|
| Noise or interference in audio |
|
| Capacitors differ from description |
|
Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or solvents.
- Storage: When not in use for extended periods, store the device in a cool, dry place, away from direct sunlight and moisture.
- Handling: Avoid dropping or subjecting the device to strong impacts.
Frequently Asked Questions (FAQ)
- Q: Can it support 32bits 384khz through USB?
- A: The PCM5102A decoding chip on this board supports a 32bit, 384KHz sampling rate. When used as a PC sound card via the Type-C USB connection, the actual audio quality and resolution will depend on the capabilities of your audio source (PC) and the software being used.
- Q: How do I change the audio output from mono to stereo?
- A: This device is designed for stereo (Double sound track) audio output. Ensure your audio source is providing a stereo signal and that your connections to the amplifier/speakers are correctly configured for stereo playback.
- Q: Does it support TWS (True Wireless Stereo)?
- A: This product is a Bluetooth receiver board designed to connect to an amplifier or active speakers, converting a Bluetooth audio signal into an analog output. It is not a True Wireless Stereo (TWS) earbud system and does not support TWS pairing with other similar boards for a wireless stereo setup.
- Q: What is the output power of this amplifier?
- A: This device is a DAC audio decoder and Bluetooth receiver board, not an amplifier. It provides a line-level audio output signal that needs to be connected to an external power amplifier to drive speakers. It does not have its own power output for speakers.
Warranty & Support
For any technical assistance, warranty claims, or product support, please contact the seller or the manufacturer directly. Keep your purchase receipt as proof of purchase.