WELLMEET WM-TC017A-3CH

Contents

WELLMEET WM-TC017A-3CH RGB LED Controller Instruction Manual

DC5-24V 86 Touch Panel 30A High-Power Wireless Wiring Free RGB LED Controller

1. Product Overview

The WELLMEET WM-TC017A-3CH is a high-power RGB LED controller designed for versatile lighting applications. It features both mobile APP and RF remote control, offering flexible operation. This controller supports 4 independent output channels, allowing for diverse lighting effects and customization.

Product demonstration video showing the controller, remote, and LED strip functionality.

2. Features

  • Dual Control Modes: Operates via mobile APP (iOS/Android) and RF remote control.
  • Versatile Output: Supports 4 independent output channels for different lighting effects.
  • IC Compatibility: Compatible with common single-wire LED driver ICs available in the market.
  • Dynamic Effects: Built-in music and non-music effects with adjustable parameters (speed, brightness, effect length, color).
  • Grouping Control: Supports any combination control of the 4 channels.
  • Trigger Function: Customizable trigger effect parameters.
  • Wide Voltage Input: DC5V-24V, with reverse connection protection.
  • Memory Function: Automatically saves setting parameters upon power loss.

3. Safety Information and Installation Precautions

Please read all safety instructions carefully before installation and use.

  • This product should be debugged and installed by someone with professional qualifications.
  • This product is not waterproof and needs to be protected from sunlight and rain. If installed outdoors, please use a waterproof box.
  • Good heat dissipation conditions will extend the service life of LED controllers. Please install the product in a well-ventilated environment.
  • Do not install or use this type of product in areas with lightning, strong magnetic fields, or high voltage.
  • Please check if the output voltage of the LED power supply used meets the requirements of the product voltage range.
  • The diameter and size of the wires used must be sufficient to load the LED lighting fixtures connected, and ensure that the wiring is secure to prevent wires from passing through, accidents triggered by heat, or poor contact.
  • Before powering on and debugging, it is necessary to ensure that all wiring is correct to avoid damage to the lighting fixtures due to wiring errors.

4. Package Contents

  • 1 x RGB LED Controller (Main Unit)
  • 1 x Touch Panel Remote Control
  • 1 x Instruction Manual (Chinese/English)
  • 2 x Double-sided adhesive tapes (for remote mounting)
RGB LED Controller and Touch Panel Remote Control

The main controller unit and the touch panel remote control.

5. Specifications

AttributeValue
Brand NameWELLMEET
Model NumberWM-TC017A-3CH
Item TypeDimmers
Is Smart DeviceNo
CertificationCE, ROHS
MaterialIron shell
Warranty12 MONTHS
Max. Load Power10A*3CH
OriginMainland China
Working VoltageDC5-24V
Input Current10A*3CH
Net Weight170G
Gross Weight180G
Controller Size (L*W*H)85mm*62mm*22mm
Remote Size (L*W*Thickness)8.5cm*8.5cm*1cm
Operation Temperature-20°C~60°C
Connection MethodCommon anode
Output Power5V<150W, 12V<360W, 24V<720W
Working PerformanceDimming and color adjustment
Product dimensions for the controller and remote control

Dimensions of the controller and touch panel remote.

6. Installation

6.1 Mounting the Touch Panel Remote

The touch panel remote can be installed in two ways:

  1. Using Double-Sided Tape: The packaging comes with double-sided tape. Prepare the tape, stick it on the back of the controller, and then paste it onto a smooth wall.
  2. Using Screws (Not Included): Open the back cover of the controller. Fix it to the wall with screws. Fully snap the control panel in place.
Two methods for installing the touch panel remote: using double-sided tape or screws.

Visual guide for mounting the touch panel remote.

6.2 Wiring the RGB LED Controller

Important: Ensure the input voltage matches the LED strip voltage (e.g., 12V LED strip connects to 12V power supply, 24V LED strip connects to 24V power supply). Do not connect directly to 220V.

  • Connect the power supply (not included) to the INPUT terminals: V+ (positive) and V- (negative).
  • Connect the RGB LED strip light to the OUTPUT terminals: V+R, G, B.
Wiring diagram for the RGB LED controller showing input and output connections.

Wiring diagram for the RGB LED controller.

Diagram showing the controller connected to an LED strip and power supply, with a hand removing the plastic septum from the remote.

Connection example and reminder to remove the plastic septum from the remote.

7. Operation

7.1 RF Remote Control Functions

Before using the remote, please remove the plastic septum from the battery compartment.

Layout of the touch panel remote control with button descriptions.

Touch panel remote control layout and functions.

  • Power Button (Top Right): Turns the RGB LED strip ON/OFF.
  • Color Temperature (CT) Switch (Top Left): Turns the white/warm white LEDs ON/OFF.
  • Color Ring (Center): Touch to select desired RGB color. The RGB LED strip will display the corresponding color.
  • CT+ / CT- Buttons: Adjust the color temperature of the white/warm white LEDs.
  • Bright+ / Bright- Buttons: Adjust the brightness of the static color or white light.
  • Mode+ / Mode- Buttons: Cycle through various dynamic lighting modes.
  • Speed+ / Speed- Buttons: Adjust the speed of the current dynamic lighting mode.

7.2 Mobile APP Control Functions

The controller supports control via a mobile APP, available for iOS (10.0 or higher) and Android (4.4 or higher). Search for "SceneX" in your App Store or Google Play, or scan the QR code in the manual to download.

  • Device Management: Open the App, click the '+' button in the top right corner to add a device, then select it to enter the control page. You can rename the controller for easy identification.
  • Channel Control: SP602E supports 4 independent output channels. You can control each channel individually or all channels uniformly.
  • Scene Saving: After adjusting the lighting effects, click the save button in the upper right corner to save the current settings as a scene. The controller supports up to 9 scenes, which can be recalled via the App or RF remote.
  • Timing Events: Set up to 5 timing events for automated control. Note: All timing events will be deleted if the controller is powered down.
  • Effect Customization: On the effects page, choose from various music and non-music effects. Customize speed, brightness, effect length, and color for specific effects.
  • Channel Copy: On any single-channel page, use the copy function to duplicate the current channel's effect to other channels.
  • Trigger Function: The trigger page offers four triggers, each with preset and dynamic effects. Customize trigger parameters like name, lasting time, and channel.
  • Grouping: Create groups by selecting associated channels. Control grouped channels simultaneously.

8. User Tips

  • Always ensure your power supply voltage matches the voltage requirements of your LED strips (e.g., 12V for 12V strips, 24V for 24V strips) to prevent damage to both the controller and the LED strips.
  • For optimal wireless performance, try to keep the controller and remote/mobile device within reasonable range and avoid major obstructions.
  • If the remote control seems unresponsive, check if the plastic septum has been removed from the battery compartment or if the battery needs replacement.

9. Troubleshooting

  • LED strip not lighting up: Check power supply connection, ensure correct voltage, verify LED strip is properly connected to controller output.
  • Remote not responding: Ensure the plastic septum is removed from the remote. Check or replace the remote battery. Ensure the remote is within range of the controller.
  • Incorrect colors/effects: Verify wiring of RGB channels. If using APP, check channel settings and ensure correct mode is selected.
  • Controller overheating: Ensure the controller is installed in a well-ventilated area with good heat dissipation. Reduce load if necessary.
  • APP connection issues: Ensure Bluetooth is enabled on your mobile device. Restart the APP and controller. Try re-pairing the device in the APP.

10. Warranty and Support

Our LED controller products provide lifelong technical support and warranty services:

  • Free Warranty: If any quality issues occur within two years from the date of purchase, our company will provide free repair or service replacement.
  • Paid Warranty: Products that exceed the free warranty period will be charged a certain cost of repair materials.

Warranty Exclusions:

The following situations are not within the scope of free warranty or replacement services:

  • Damage caused by excessive voltage, overload, or improper operation.
  • Any wiring errors, water immersion (for non-waterproof products), and unauthorized repairs.
  • Any serious damage or deformation to the appearance caused by transportation or knocking.
  • The product appearance is severely damaged or deformed.
  • Damage caused by natural disasters and uncontrollable human factors, such as earthquakes, floods, fires, etc.

Repair and Replacement Process:

  • Our company's maximum responsibility for factory products is to replace them with products of the same model and quantity.
  • In order to speed up the repair or replacement process, please indicate the fault phenomenon, operating environment, and actions taken when the fault occurred to ensure that the repair situation is quickly resolved.
  • As long as we receive the returned product and initial accessories, we promise to replace or repair them for the customer, and the logistics cost of the return will be borne by the customer.

For further assistance, please refer to the official user manual (PDF) available at User manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.