1. Product Overview
The DEPSTECH DS700-TL-5M is a heavy-duty industrial endoscope camera designed for detailed inspections in hard-to-reach areas. It features a large 7-inch IPS screen, a triple-lens camera system, and a robust gooseneck cable, making it ideal for automotive, plumbing, and construction applications.
2. Package Contents
Please check the package for the following items:
- DEPSTECH DS700 Endoscope Monitor
- Endoscope Probe (1m Soft Cable + 4m Gooseneck Cable)
- USB-C Charging Cable
- Hook Attachment
- Magnet Attachment
- 32GB TF Card (pre-installed or included separately)
- Hardshell Carry Case
- User Manual (this document)
3. Getting Started
3.1 Charging the Device
Before first use, fully charge the DS700 monitor. Connect the provided USB-C charging cable to the device and a suitable USB power adapter (not included). The 5200mAh battery provides up to 4 hours of working time.
3.2 Inserting the TF Card
Locate the TF card slot on the side of the monitor. Insert the 32GB TF card (included) until it clicks into place. This card is essential for saving photos and videos.
3.3 Attaching the Endoscope Probe
Carefully connect the endoscope probe cable to the designated port on the top of the DS700 monitor. Ensure a secure connection.
3.4 Powering On/Off
Press and hold the 'POWER' button on the right side of the monitor to turn the device on or off.
4. Operation
4.1 Screen and Controls
The DS700 features a 7-inch IPS color screen with a 1024x600 resolution and a 178° viewing angle for extended visibility and sharpness. The control panel on the right side of the screen allows for easy navigation and function selection.
4.2 Triple Lens System
The endoscope probe is equipped with a triple-lens system (Front Lens A, Side Lens B, Side Lens C) for comprehensive viewing. The camera diameter is 7.9mm.
- Front Lens A: Focal Range 3-8cm (1.18-3.93 in)
- Side Lens B: Focal Range 2-6cm (0.79-2.36 in)
- Side Lens C: Focal Range 1.5-3cm (0.59-0.98 in)
You can switch between two split-screen modes: Front View + Side B, or Front View + Side C. This allows for inspecting multiple angles simultaneously.
4.3 Adjusting LED Lights
The camera head features 6+1+1 adjustable LED lights (3 levels) to illuminate dark inspection areas. Use the light adjustment buttons on the monitor to increase or decrease brightness as needed.
4.4 Taking Photos and Recording Videos
The DS700 supports taking 1920x1080 (2MP) photos and recording videos with sound, thanks to its built-in microphone and speaker. Use the dedicated buttons on the monitor to capture media. All media is saved to the inserted TF card.
4.5 Using the Gooseneck Cable
The endoscope comes with a 1m soft cable and a 4m gooseneck (hard) cable. The gooseneck cable is robust, flexible, and bendable, allowing it to hold its position for precise camera placement in complex environments.
Video 1: Demonstration of the gooseneck cable's flexibility and stability.
4.6 Data Transfer
You can easily transfer data (photos and videos) from the device to a computer using the USB-C cable. Connect the DS700 to your computer, and it will appear as a removable storage device.
4.7 Ergonomic Design
The DS700 is designed for user convenience, featuring a sturdy metal stand for hands-free operation and a convenient strap handle for secure carrying during inspections.
5. Maintenance
5.1 Cleaning
The camera probe is IP67 waterproof, allowing for inspection in wet environments. After use, wipe the camera head and cable with a clean, damp cloth. Ensure the monitor is kept dry.
5.2 Storage
When not in use, store the DS700 endoscope camera and its accessories in the provided hardshell carry case to protect it from damage.
5.3 Battery Care
To prolong battery life, avoid fully discharging the battery frequently. Recharge the device when the battery level is low. If storing for an extended period, charge the battery to approximately 50%.
6. Troubleshooting
- No Image on Screen: Ensure the endoscope probe is securely connected to the monitor. Check if the device is powered on and the battery is charged.
- Poor Image Quality: Adjust the LED lights for better illumination. Ensure the camera lens is clean. Verify the focal range for the active lens (Front, Side B, or Side C) matches your inspection distance.
- Device Not Powering On: Connect the device to a charger and allow it to charge for at least 30 minutes before attempting to power it on again.
- Cannot Save Photos/Videos: Ensure the TF card is correctly inserted and has sufficient free space. The TF card may need to be formatted (refer to device settings).
7. Specifications
| Attribute | Value |
|---|---|
| Screen Type | 7.0 inch IPS Color |
| Screen Resolution | 1024x600 |
| Screen Viewing Angle | 178° |
| Lens (mm) | 7.9mm Triple Lens |
| Camera Pixel | 1080P (2MP) |
| Focal Range (Front Lens) | 3-8cm (1.18-3.93 in) |
| Focal Range (Side B Lens) | 2-6cm (0.79-2.36 in) |
| Focal Range (Side C Lens) | 1.5-3cm (0.59-0.98 in) |
| Light Source | 6+1+1 Adjustable LED Light (3 Levels) |
| Waterproof Rating | IP67 (Camera Probe) |
| Battery | 5200mAh (up to 4 hours working time) |
| Cable Length | 5m |
| Cable Type | 1m Soft Cable + 4m Gooseneck Cable (Hard Cable) |
| Accessories | Hook, Magnet, Hardshell Case, 32GB TF Card |
| Wire Type | Hard Wire |
| High-concerned chemical | None |
8. User Tips
- Maximize Viewing: Utilize the triple lens system and split-screen view to get a comprehensive understanding of the inspection area without constantly re-positioning the camera.
- Optimal Lighting: Always adjust the LED lights to the appropriate brightness level for the environment to ensure clear images and videos.
- Cable Stability: The gooseneck cable is designed to hold its shape. Bend it carefully to navigate obstacles and maintain the camera's position for stable viewing.
- Hands-Free Operation: Use the integrated metal stand to prop up the monitor on a flat surface, freeing your hands for manipulating the probe.
- Secure Handling: The convenient strap handle provides a secure grip, reducing the risk of accidental drops during use.
- Check for Accessories: If you need to retrieve small metallic objects, remember to attach the hook or magnet accessories to the camera head.
9. Safety and Compliance
⚠️ Disclaimer:
Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
10. Warranty and Support
This DEPSTECH product comes with a 1-year warranty. For technical support, troubleshooting assistance, or warranty claims, please contact DEPSTECH customer service through their official channels. Please retain your proof of purchase for warranty validation.
