1. Introduction
Thank you for purchasing the SKMEI 1391 Multi-Time Zone Men's Sports Watch. This watch combines both digital and quartz movements, offering a range of features including three time zones, a chronograph, alarm, date, week display, and an EL (Electro-Luminescent) backlight. This manual provides detailed instructions to help you set up and operate your watch effectively.
2. Key Features
- Triple Time Display: Analog (Time One) and two Digital (Time Two, Time Three) displays.
- Chronograph: Stopwatch function for measuring elapsed time.
- Alarm: Daily alarm function.
- Date & Week Display: Shows current date and day of the week.
- EL Backlight: Electro-Luminescent light for visibility in low-light conditions.
- 12/24 Hour Format: Selectable time display format.
- Shock Resistant: Designed to withstand impacts.
- Water Resistance: 30M/3Bar, suitable for daily use (washing hands, rain).
3. Watch Components
Familiarize yourself with the buttons and displays on your SKMEI 1391 watch:
- EL LIGHT Button: Activates the backlight.
- MODE Button: Cycles through different display modes (Time, Chronograph, Alarm).
- START/STOP Button: Used for starting/stopping the chronograph and adjusting settings.
- RESET Button: Used for resetting the chronograph and confirming settings.
- Crowns (Right Side): Used for setting analog time and potentially other functions depending on the specific model variant.
4. Initial Setup
4.1 Setting Analog Time (Time One)
- Pull out the crown on the right side of the watch.
- Rotate the crown to adjust the hour and minute hands to the desired time.
- Push the crown back in to start the analog movement.
4.2 Setting Digital Time (Time Two & Time Three), Date, and Alarm
- In normal time display mode, press the MODE button repeatedly until you reach the time setting mode (usually indicated by flashing digits).
- Use the START/STOP button to select the digit you wish to adjust (e.g., seconds, hours, minutes, month, date, day of week).
- Use the RESET button to change the value of the selected digit.
- Continue pressing START/STOP and RESET until all desired settings (time, date, week, 12/24 hour format) are configured.
- Press the MODE button to exit the setting mode and save your changes.
- To set the alarm, navigate to the alarm mode using the MODE button. Follow a similar procedure using START/STOP and RESET to set the alarm time.
5. Operating Instructions
5.1 Using the EL Backlight
Press the EL LIGHT Button (typically on the upper left side) to illuminate the digital display for a few seconds. This is useful in dark environments.
5.2 Using the Chronograph (Stopwatch)
- Press the MODE button until the chronograph display appears (usually showing '00:00:00').
- Press the START/STOP button to begin timing.
- Press START/STOP again to pause the timing.
- Press START/STOP to resume timing from where it was paused.
- To reset the chronograph to zero, press the RESET button while the chronograph is paused.
5.3 Activating/Deactivating Alarm
In alarm mode (accessed via the MODE button), use the START/STOP or RESET button to toggle the alarm ON or OFF. An alarm icon will typically appear on the display when activated.
6. Care and Maintenance
6.1 Water Resistance
Your SKMEI 1391 watch is rated for 30M/3Bar water resistance. This means it is suitable for:
- Washing hands
- Exposure to rain
DO NOT:
- Submerge the watch in water (e.g., swimming, showering, bathing).
- Expose the watch to hot water or steam.
- Press any buttons while the watch is wet or submerged.
6.2 General Care
- Clean the watch regularly with a soft, dry cloth.
- Avoid exposing the watch to extreme temperatures, strong magnetic fields, or harsh chemicals.
- Store the watch in a cool, dry place when not in use.
- If the watch band is made of leather, avoid prolonged exposure to water or direct sunlight to prevent damage and discoloration.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Digital display is blank or dim. | Low battery. | Replace the battery. Consult a professional if unsure. |
| Analog hands are not moving. | Crown is pulled out; low battery. | Push the crown back in. If still not working, replace battery. |
| Time/Date is incorrect. | Not set correctly; accidental button press. | Refer to Section 4.2 to reset the digital time and date. |
| Watch fogging up internally. | Exposure to extreme temperature changes or moisture ingress. | Avoid sudden temperature changes. If fogging persists, seek professional service. |
8. Specifications
| Attribute | Detail |
|---|---|
| Brand | SKMEI |
| Model Number | 1391 |
| Movement | Quartz, Digital (Dual Display) |
| Display Type | Arabic Numeral Markers (Analog), LED Display (Digital) |
| Case Material | Alloy (Zinc Alloy) |
| Case Shape | Square |
| Case Thickness | 15mm |
| Dial Diameter | 51mm |
| Dial Window Material Type | Glass |
| Band Material Type | Leather (PU) |
| Band Width | 24mm |
| Band Length | 26.5cm |
| Clasp Type | Buckle (Stainless Steel) |
| Water Resistance Depth | 3Bar (30 meters) |
| Weight | 123g |
| Features | Back Light, Shock Resistant, LED Display, Repeater, Luminous, Auto Date, Complete Calendar, Water-Resistance, Alarm, Week Display |
9. User Tips
- Band Longevity: The watch features a PU leather band. To extend its life, avoid excessive moisture and direct sunlight. If the band shows signs of wear, replacement bands may be available from watch repair shops or online retailers.
- Battery Replacement: If the display becomes dim or the watch stops functioning, it likely needs a new battery. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.
10. Warranty and Support
For any issues or questions regarding your SKMEI 1391 watch, please refer to the seller's support channels. Ensure you retain your proof of purchase for any warranty claims.