1. Introduction
The WOYO Motorcycle LED Controller is an advanced plug-and-play accessory manager designed to seamlessly integrate with your BMW motorcycle's CAN bus control system. This innovative module allows you to control additional spotlights using your motorcycle's original switches, eliminating the need for extra buttons and maintaining a clean aesthetic. It offers various functionalities including brightness adjustment and multiple light modes.
This controller is compatible with a range of BMW R-Series and F-Series motorcycles from 2016 to 2025. Please ensure your motorcycle has a dimming line on its lights for compatibility.
Image: Motorcycle equipped with the WOYO LED Controller, showcasing enhanced lighting with original button control.
2. Safety Warnings
- Important: If your existing auxiliary lights do not have a dimming line, this controller is not suitable for your setup.
- Regional Policy Note: Due to safety policies in some countries, the turn signal button function for controlling the spotlights may be disabled.
- Power Limit: The total load power of all connected spotlights to the module must not exceed 260W. Exceeding this limit can cause damage to the controller and motorcycle's electrical system.
- The lights will not operate when the motorcycle engine is not running.
3. Product Overview & Components
The WOYO MLC Module is equipped with two adjustable lighting circuits: one main light circuit and one auxiliary light circuit. It features a plug-and-play design for straightforward installation.
Package Contents:
- MLC Module *1
- 3P Connector *4
- Black Stopper *12
- Male Female Crimp Terminal *12
Note: An adapter cable is not required when connecting to Denali Spotlights. If connecting to GR spotlights, a separate GR extension cable may be needed.
Image: The package includes the MLC module, connectors, stoppers, and crimp terminals.
Cable Module Details:
- 1. Power Supply: 12V Fuse 30A (Red-Positive, Black-Negative)
- 2. CAN BUS: Red/Black/Blue/Green (Male / Female 4P)
- 3. Lighting Circuit No.1: Blue/White/Black (3P) 90W *1
- 4. Lighting Circuit No.2: Green/White/Black (3P) 150W *1
Wiring for Lighting Circuit No.1:
- Blue - Spotlight Positive
- White - PWM Adjust Brightness Wire
- Black - Spotlight Negative
Wiring for Lighting Circuit No.2:
- Green - Spotlight Positive
- White - PWM Adjust Brightness Wire
- Black - Spotlight Negative
Image: Detailed wiring for connecting spotlights to the controller's lighting circuits.
4. Compatibility
The WOYO Motorcycle LED Controller is designed for specific BMW motorcycle models and years. Please verify your motorcycle's model and year against the list below to ensure compatibility.
Supported Motorcycle Models (Years 2016-2025):
Image: Compatibility chart for WOYO MLC001, MLC002, and MLC003 modules.
| Controller Model | Plug Type | Compatible BMW R-Series Module | Compatible BMW F-Series Module |
|---|---|---|---|
| MLC001 | RDC Plug | R1250R, R1250RS, R1250RT, R1250GS, R1250GSAdv | N/A |
| MLC002 | RDC Plug | R1200R, R1200RS, R1200RT, R1200GS, R1200GSAdv | N/A |
| MLC003 | DWA Plug | N/A | F750GS-K80, F650(2 CYL.) -K72, F800GS-K72, F850GS-A2K81, F850GSAdv-K82, F900R-K, F900XR-K84, S1000R, S1000XR, K1600 |
The controller supports auxiliary lights or fog lights but does not support brake lights.
5. Installation & Setup
The WOYO MLC Module is designed for plug-and-play installation. Follow these steps to connect the module and configure your spotlights.
5.1. Confirming Spotlight PWM Dimming Line Type
Before installation, it's crucial to determine if your spotlights use a "High Level" or "Low Level" PWM dimming line. This affects the controller's configuration.
- Connect your spotlight directly to a 12V power battery.
- Turn on the spotlight.
- Use a multimeter to test the voltage between the negative (-) terminal of the power battery and the dimming line of the spotlight.
- If the voltage is close to 0V, it is a "Low Level" dimming line (e.g., Denali lights).
- If the voltage is close to the power battery voltage (e.g., 12V), it is a "High Level" dimming line (e.g., GR lights).
Image: Instructions for identifying PWM dimming line type and modifying the controller for High/Low level.
5.2. Changing Dimming Level (High to Low)
The default setting for the MLC Controller (before August 24, 2023) is high-level dimming, directly compatible with GR brand spotlights. If your spotlights require a "Low Level" dimming configuration, you will need to modify the controller:
- Open the side panel of the MLC module.
- Solder the two designated solder joints together on the side of the circuit board.
5.3. Connecting the MLC Module
Connect the MLC module to your motorcycle's electrical system and spotlights as per the diagram. The module connects to the motorcycle's CAN bus and battery, and then to your spotlights.
Image: Overall system diagram showing the connection of the MLC module, RDC/DWA, battery, and up to four auxiliary lights.
Image: Detailed diagram of the MLC module's wiring, including power supply, CAN bus, and two lighting circuits.
If you are using GR brand spotlights, you may need to purchase a separate GR extension cable for proper connection. The package for the MLC001/MLC002/MLC003 Module does not include these extension cables.
Image: GR Light Extension Cable (59 inches, 2 pieces), sold separately.
6. Operating Instructions
The WOYO MLC Module allows control of your spotlights using the motorcycle's original buttons. Ensure the ignition is on and the engine is running for the lights to operate.
6.1. Initial Activation & Self-Test
- Turn on the ignition lock to start the spotlights module.
- Upon power-up, the spotlights will perform a self-test.
6.2. Spotlight Control Modes
Utilize your motorcycle's existing controls to manage the spotlights:
| Control Action | Function |
|---|---|
| Before starting spotlight: Press High Beam button | Synchronizes spotlights to instant high brightness. |
| Before starting spotlight: Press Horn button | Flashes the spotlight. |
| Long press Turn Signal Reset button for 3s | Turns on the first set of spotlights. |
| Press Turn Signal Reset button 3 times within 2s | Turns on the second set of spotlights. |
| Press Turn Signal once (to activate dimming mode) | Activates dimming mode. Then, roll the wheel forward to increase brightness, or backward to decrease brightness. |
| Quickly press High Beam button 3 times in 2s | Starts the spotlights flashing mode. |
| Keep High Beam button on | Maintains synchronized high brightness. Releasing returns to the last mode. |
| Push and hold wheel to the right for 3s (once) | Synchronizes the spotlights flashing mode. |
| Push and hold wheel to the right for 3s (twice) | Enters the left-right spotlights flashing mode. |
| Push and hold wheel to the right for 3s (third time) | Returns to the constant light mode. |
| Quickly press Turn Signal Reset button 3 times | Turns off the first set of spotlights. |
| Press and hold Turn Signal Reset button over 3s | Turns off the second set of spotlights. |
| Turn off Turn Signal | Resets to factory settings. |
Image: Visual guide to operating the spotlight modes using the motorcycle's wheel, horn, turn signal, and high beam buttons.
Video: Demonstration of the WOYO NEW Spotlight Mode for BMW motorcycles, showing self-test, flashing, dimming, and various light modes controlled by the original buttons.
7. Specifications
- Item Type: Spotlight Assembly
- Wattage: 400W (General rating, refer to max load for controller)
- Max Total Load Power: 260W (for all connected spotlights)
- Lighting Circuit No.1 Capacity: 90W
- Lighting Circuit No.2 Capacity: 150W
- Origin: Mainland China
- Supported Motorcycle Years: 2016-2025
8. Maintenance
The WOYO Motorcycle LED Controller is designed for durability and minimal maintenance. Regularly inspect all wiring connections for security and signs of wear or damage. Ensure the module itself is kept clean and free from excessive moisture or debris. If any issues arise, refer to the troubleshooting section or contact support.
9. Troubleshooting
- Spotlights not turning on:
- Ensure the motorcycle ignition is on and the engine is running.
- Check all wiring connections for proper seating and continuity.
- Verify the total load power of your spotlights does not exceed 260W.
- Confirm your spotlights have a dimming line and the controller is configured for the correct level (High/Low).
- Specific control functions not working:
- Ensure you are performing the button presses (e.g., long press, multiple presses) within the specified timeframes.
- Note that the turn signal button function may be disabled in some regions due to local safety policies.
- Inconsistent dimming or flashing:
- Re-check the dimming line type and controller configuration (High/Low level).
- Ensure the wheel is rotated smoothly and deliberately when adjusting brightness.
10. User Tips
- Pre-Purchase Verification: Before purchasing, it is highly recommended to provide your motorcycle model and year (e.g., BMW F750GS 2023), VIN, and the brand of your spotlights to the seller. If possible, include a photo of your motorcycle's wheel button and instrument screen for accurate compatibility assessment.
- GR Spotlight Connection: If you plan to connect GR brand spotlights, remember to acquire the specific GR extension cable, as it is not included with the MLC module.
- Customization: The module supports various spotlight brands, but some may require DIY adjustments. Always consult the dimming line type and adjust the controller accordingly.
11. Support
For any questions regarding installation, operation, or troubleshooting that are not covered in this manual, please contact WOYO customer support. You may also request a language-specific manual if available.
