1. Introduction and Overview
This manual provides essential information for the safe and efficient operation of your PowMr 6.2KW 48V Off-Grid & On-Grid Hybrid Inverter. This multi-function inverter/charger integrates the capabilities of an inverter, solar charger, and battery charger to deliver uninterrupted power support in a compact design. Its intuitive LCD display allows for user-configurable settings and easy button operation, including battery charging current, AC/solar charger priority, and acceptable input voltage ranges for various applications.
The integrated all-in-one solar inverter seamlessly combines inverter output and energy storage charging functions, facilitating the integration of clean solar energy and grid power into the battery and load. With two built-in AC outputs, it achieves a maximum output power of 6200W. Its wide MPPT range of 90-500V and maximum PV input power of 6500W greatly expand possibilities for solar array configurations. This versatile system is compatible with both lithium-ion and lead-acid battery systems, supporting a maximum charging current of 120A. It includes multiple protection features and a lithium activation function to ensure smooth and secure operation.
Video: PowMr 6.2KW 48V Hybrid Inverter Product Overview
2. Safety Information
Please read this manual carefully before installation and operation. Failure to follow instructions may result in electric shock, fire, or serious injury. Keep this manual for future reference.
General Safety Precautions:
- Ensure all wiring is performed by qualified personnel.
- Do not attempt to repair the unit yourself. Refer servicing to authorized service personnel.
- Keep the inverter away from water, excessive heat, and flammable materials.
- Ensure proper ventilation around the inverter to prevent overheating.
- Always disconnect all power sources (AC, PV, and Battery) before performing any maintenance or wiring.
Electrical Safety:
- This device operates at high voltages. Exercise extreme caution.
- Verify correct polarity when connecting batteries and PV arrays. Incorrect polarity can damage the unit and void the warranty.
- Use appropriate circuit breakers and fuses for all connections as specified in local electrical codes.
- The inverter is equipped with multiple protection features including Short Circuit, Over-Load, Over Current, Backfill, Over Voltage, Over-Temperature, Under Voltage, and Over Charge protection. However, these should not replace proper installation and safety practices.

Image: Inverter with 360 Degree Protection Features
3. Package Contents
Upon unpacking, please ensure all items are present and undamaged:
- PowMr 6.2KW 48V Hybrid Inverter (Model: POW-HVM6.2M-48V-N)
- User Manual
4. Product Features
- Pure Sine Wave Output: Provides clean and stable power suitable for sensitive electronics.
- Configurable Settings: User-adjustable input voltage range for home appliances (e.g., 230Vac) and personal computers, battery charging current, and AC/Solar charger priority via LCD.
- Dual AC Output: Features two independent AC outputs for main and secondary loads.
- Wide MPPT Voltage Range: 90~500VDC for flexible solar panel configurations.
- High PV Input Power: Supports a maximum PV array power of 6500W.
- High Charging Current: Maximum MPPT charging current of 120A.
- Battery Compatibility: Compatible with various battery types including LiFePO4, Lithium, Flooded, Gel, and Lead-acid batteries. Includes a lithium activation function.
- Grid Integration: Suitable for both grid-tied and off-grid applications.
- Generator/Utility Compatibility: Can operate with both mains voltage and generator power.
- Automatic Restart: Automatically restarts when AC power recovers.
- Comprehensive Protection: Built-in protections against overload, over-temperature, short circuit, over voltage, under voltage, over charge, and backfill.
- Cold Start Function: Allows the inverter to start directly from batteries without AC input.
- Cooling System: Equipped with 3 cooling fans for efficient heat dissipation.
- Maintenance: Features a demountable insect screen for easy cleaning.
5. Setup and Installation
5.1 Physical Installation
The inverter should be mounted vertically on a sturdy wall in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Ensure sufficient clearance around the unit for airflow. The dimensions of the inverter are approximately 444x300x100 mm (17.48 x 11.81 x 3.94 inches) and it weighs 10KG.

Image: Inverter Dimensions and Key Specifications
5.2 Wiring Diagram
The following diagram illustrates a typical hybrid power system setup for the inverter. Ensure all connections are secure and follow local electrical codes.

Image: Hybrid Power System Wiring Diagram
5.3 Battery Connection
Connect the 48V battery bank to the inverter's battery terminals. This inverter supports various battery types including LiFePO4, Lithium, Flooded, Gel, and Lead-acid batteries. Ensure correct polarity (+ to + and - to -). For lithium batteries, the inverter includes a lithium activation function. When solar energy is present, setting the battery type to 'LI' will activate the lithium battery after 3 seconds.

Image: Battery Compatibility and Activation
5.4 PV (Solar Panel) Connection
Connect your solar panel array to the PV input terminals. The inverter has an MPPT voltage range of 90~500VDC and can handle a maximum PV array power of 6500W. Ensure the open circuit voltage of your solar array does not exceed 500VDC.
5.5 AC Input/Output Connection
Connect the AC input from your utility grid or generator to the 'AC IN' terminals. Connect your loads to the 'MAIN OUT' and 'SECOND OUT' terminals. The inverter provides a dual AC output of 230V. Ensure all AC wiring is properly grounded and protected by circuit breakers.

Image: Rear View of Inverter with Connection Ports
6. Operation
6.1 LCD Display and Buttons
The comprehensive LCD display allows users to monitor system status and configure various parameters. Use the accessible buttons to navigate through menus and adjust settings such as battery charging current, AC/solar charger priority, and acceptable input voltage range.

Image: Front View of Inverter with LCD Display
6.2 Charging and Output Modes
The inverter supports multiple charging and output modes to optimize energy usage:
- Solar Priority: Solar power is prioritized for charging batteries and powering loads.
- Solar + Utility: Solar power is the primary source, with utility grid power used as a supplement.
- Only Solar: Only solar power is used for charging and loads.
- SBU Mode (Solar-Battery-Utility): Solar power is used first, then battery power, and finally utility power as a last resort.

Image: Multiple Charging and Output Modes Diagram
7. Maintenance
- Regular Cleaning: Periodically clean the exterior of the inverter.
- Insect Screen: The inverter is equipped with a demountable insect screen for cleaning. Regularly check and clean the screen to ensure proper airflow and prevent dust accumulation.
- Connection Check: Periodically inspect all electrical connections for tightness and signs of corrosion.
- Ventilation: Ensure that the ventilation openings are not blocked and that there is adequate airflow around the unit.
8. Troubleshooting
If you encounter issues with your inverter, refer to the following common problems and solutions:
- Inverter not turning on: Check battery connections, battery voltage, and ensure the DC breaker is on. Verify AC input if operating in grid-tied mode.
- No AC output: Check for overload conditions, short circuits, or high temperature warnings on the LCD. Ensure AC output breakers are closed.
- Low PV charging: Verify solar panel connections, ensure panels are clean and not shaded. Check PV array voltage and current. Ensure MPPT voltage range is met.
- Error codes on LCD: Refer to the specific error code in the full user manual for detailed troubleshooting steps.
- Inverter not compatible with 120V US grid: This inverter is designed for 220-240VAC output. It is not directly compatible with standard 120V household outlets in the USA without additional equipment (e.g., a step-down transformer) or specific 240V wiring.
- Parallel operation: This model is a single unit with dual AC output. It is not designed for parallel connection of multiple inverters to increase power output or redundancy.
9. Specifications
| INVERTER MODEL | POW-HVM4.2M-24V-N | POW-HVM6.2M-48V-N |
|---|---|---|
| Input Voltage Waveform | Pure Sine Wave (Utility or Generator) | |
| Nominal Input Voltage | 230Vac | |
| Max AC Input Voltage | 300Vac | |
| Efficiency (Line Mode) | >95% (Rated R load, battery full charged) | |
| Transfer Time | 10ms typical (UPS); 20ms typical (Appliances) | |
| INVERTER MODEL | POW-HVM4.2M-24V-N | POW-HVM6.2M-48V-N |
|---|---|---|
| Rated Output Power | 4.2KW | 6.2KW |
| Output Voltage Waveform | Pure Sine Wave | |
| Output Voltage Regulation | 230Vac±5% | |
| Output Frequency | 50HZ | |
| Peak Efficiency | 0.93 | |
| Overload Protection | 3s@≥150% load; 5s@101%~150% load | |
| Surge Capacity | 2* rated power for 5 seconds | |
| Nominal DC Input Voltage | 24Vdc | 48Vdc |
| Cold Start Voltage | 23.0Vdc | 46.0Vdc |
| No Load Power Consumption | 30W | 50W |
| INVERTER MODEL | POW-HVM4.2M-24V-N | POW-HVM6.2M-48V-N |
|---|---|---|
| Utility Charging Mode | ||
| Charging Algorithm | 3-Step | |
| AC Charging Current (Max) | 100A | 100A |
| MPPT Solar Charging Mode | ||
| Max. PV Array Power | 6200W | 6500W |
| Nominal PV Voltage | 240Vdc | 360Vdc |
| PV Array MPPT Voltage Range | 60Vdc~450Vdc | 90Vdc~500Vdc |
| Max. PV Array Open Circuit Voltage | 500Vdc | |
| Max Charging Current (AC charger plus solar charger) | 120A | 120A |
| INVERTER MODEL | POW-HVM4.2M-24V-N | POW-HVM6.2M-48V-N |
|---|---|---|
| Nominal Output Voltage | 220/230/240VAC | |
| Feed-in Grid Voltage Range | 195-253VAC | |
| Feed-in Grid Frequency Range | 49-51±1Hz/59-61±1Hz | |
| Nominal Output Current | 18.2A | 26.9A |
| Maximum Conversion Efficiency (DC/AC) | 97% | |
| INVERTER MODEL | POW-HVM4.2M-24V-N | POW-HVM6.2M-48V-N |
|---|---|---|
| Full Load | 4200W | 6200W |
| Maximum Main Load | 4200W | 6200W |
| Maximum Second Load (battery model) | 1400W | 2066W |
| Main Load Cut Off Voltage | 26VDC | 52VDC |
| Main Load Return Voltage | 27VDC | 54VDC |
General Specifications:
- Model Number: POW-HVM6.2M-48V-N
- Output Current: MPPT 120A
- Output Power: 1 - 200 KW (Rated 6200W)
- Size: 444x300x100 mm
- Output Type: SINGLE
- Weight: 10KG
- Output Frequency: 50HZ/60HZ
- Is Smart Device: Yes
- Certification: CE
- Battery Type: Lifepo4, Lithium, Flooded, Gel, Lead-acid Batteries
- Load Type: Household appliances, farm tools, factory equipment, commercial load, industrial machinery
- Applicable Area: Asia, Europe, Africa and North America (220-240VAC drivers)
10. User Tips
- Voltage Compatibility: Be aware that this inverter provides 220-240VAC output. If you are in a region with 120V AC mains (e.g., USA), you will need appropriate wiring or a step-down transformer for compatibility with standard household appliances.
- Battery Activation: For lithium batteries, ensure the battery type is correctly set to 'LI' in the inverter's settings. The battery will activate automatically when solar energy is available.
- Monitoring: Regularly check the LCD display for system status, error messages, and performance metrics to ensure optimal operation.
11. Warranty and Support
This PowMr inverter comes with a 1-year warranty. For technical support, troubleshooting assistance, or warranty claims, please contact your authorized dealer or PowMr customer service. The product is CE certified, ensuring compliance with European safety, health, and environmental protection requirements.

Image: CE Certificate of Conformity