ORIA RGB LED Digital Alarm Clock User Manual

1. Introduction

Thank you for choosing the ORIA RGB LED Digital Alarm Clock. This device combines a modern digital alarm clock with vibrant RGB lighting features, offering both functionality and aesthetic appeal for your home or office. Please read this manual carefully to ensure proper setup and operation, and to fully utilize all features of your new alarm clock.

Key Features:

• HD LED Display with 12/24-Hour Format
• Time and Day of the Week displayed on the same screen
• Dual Alarm Clock with Snooze Function (5-60 minutes)
• 10 Night Lights & RGB Dynamic Colors with 3-level brightness
• 11 Digit Colors & 4 Levels of Brightness for the clock display
• Night Mode for automatic dimming (18:00-6:00)
• Type-C Charging & Memory Function (CR2032 button battery for time memory)
• Dual Output Ports (Type-C and USB) for charging external devices

2. Safety Information

• Do not expose the device to extreme temperatures, direct sunlight, or high humidity.
• Avoid dropping or subjecting the device to strong impacts.
• Use only the specified power adapter (DC5V/1A-2A) to prevent damage.
• Keep the device away from water or other liquids.
• Do not attempt to disassemble or repair the device yourself. Contact qualified personnel for service.
• Dispose of electronic products responsibly. If the product is damaged and needs to be recycled, please send it to the nearest recycling division.

3. Package Contents

Please check the package for the following items:

• 1 x Main Unit (RGB LED Digital Alarm Clock)
• 1 x Power Cord (USB to Type-C)
• 1 x CR2032 Button Cell Battery (pre-installed or separate)
• 1 x Instruction Manual (PDF version available: User manual (PDF))

4. Product Overview

Refer to the diagram above for the location of buttons and ports:

• Output 1 (Type-C) & Output 2 (USB): For charging external devices.
• Input (DC5V/1A-2A): Power input port.
• CR2032: Battery compartment for time memory.
• COLOR: Mood Light control.
• DIMMER: Clock Display Brightness control.
• SNOOZE MULTICOLOR: Snooze function and Clock Display Color setting.
• BRIGHTNESS + / -: Adjusts brightness for mood light and enters/exits night mode.
• TIME SET: Sets time, day, and snooze duration; switches 12/24H format.
• AL1 SET ON/OFF & AL2 SET ON/OFF: Sets and activates/deactivates Alarm 1 and Alarm 2.
• VOLUME: Adjusts alarm volume.
• Wall hole: For wall mounting.
• Detachable stand: For tabletop placement.

5. Setup

1. Install CR2032 Battery: Open the battery compartment and install the CR2032 button battery, ensuring correct polarity (+, -). This battery is for time memory function only and does not power the clock.
2. Connect Power: Plug the Type-C end of the provided power cord into the "INPUT 5V 1A" port on the product. Plug the USB end into a USB 5V power supply port (use a 5V/1A or 5V/2A adapter).
3. Remove Protective Film: Carefully tear off the protective film from the surface of the screen.

6. Operating Instructions

6.1 Clock Setting

1. In time display mode, long press the "TIME SET" button for 3 seconds. The HOUR digits will flash. Use the "+" or "-" buttons to adjust the hour.
2. Press "TIME SET" again. The MINUTE digits will flash. Use the "+" or "-" buttons to adjust the minute.
3. Press "TIME SET" again. The WEEK digits will flash. Use the "+" or "-" buttons to adjust the correct day of the week.
4. Press "TIME SET" again. The SNOOZE TIME digits will flash. Use the "+" or "-" buttons to adjust the snooze duration (5-60 minutes).
5. Press "TIME SET" to exit the setting and return to the time display.
6. 12/24 Hour Format: Short press the "TIME SET" button to switch between 12-hour and 24-hour formats. The corresponding AM/PM indicator will light up or turn off.

6.2 Alarm Setting

1. In time display mode, long press the "AL1 SET ON/OFF" button (or "AL2 SET ON/OFF" for Alarm 2) for 3 seconds. The alarm icon and HOUR digits will flash. Use the "+" or "-" buttons to adjust the hour.
2. Press the alarm button again. The MINUTE digits will flash. Use the "+" or "-" buttons to adjust the minute.
3. Press the alarm button again to enter alarm mode setting. Use the "+" or "-" buttons to select one of the following modes:
   • 1-5: Ringing from Monday to Friday
   • 1-6: Ringing from Monday to Saturday
   • 1-7: Ringing every day
   • 6-7: Weekend ringing mode
   • 1-1: Same day ringing mode
4. Press the alarm button again to exit the setting and return to the time display.

Note: Alarm 1 and Alarm 2 settings are independent.

6.3 Usage of Alarm and Snooze

1. Turn Alarm On/Off: In time display mode, short press the "+" or "-" button to turn Alarm 1 or Alarm 2 on or off. The alarm icon will light up when the alarm is active.
2. When the set alarm time is reached, the clock will ring for 2 minutes.
3. Snooze Function: When the alarm goes off, press the "SNOOZE MULTICOLOR" button to suspend the alarm. The alarm icon will flash, and the clock will alarm again after the set snooze time (5-60 minutes) has passed.
4. Stop Alarm: To stop the alarm when it goes off, press any button except "SNOOZE MULTICOLOR".

6.4 Clock Display Color Setting

In clock display mode, short press the "SNOOZE MULTICOLOR" button to cycle through 11 different light color display modes for the digits, including random color, gradient color, RGB dynamic color, and regular colors.

6.5 Clock Display Brightness Setting

In time display mode, short press the "DIMMER" button to adjust the display brightness. There are 3 levels of brightness adjustment, with the last level being the screen off function.

6.6 Night Mode Setting

1. In time display mode, long press the "BRIGHTNESS + / -" button for 3 seconds to enter the night mode setting.
2. Use the "+" or "-" buttons to turn night mode on or off.
3. Press the "BRIGHTNESS + / -" button again to exit the setting and return to the time display.

When night mode is on and the display brightness is high, the display will automatically dim at night (18:00-6:00).

6.7 Alarm Volume Setting

In the time display interface, short press the "VOLUME" button to switch the alarm clock ringing volume between loud (95db) and low (55db). The setting will automatically return to the time interface after 10 seconds of ringing.

6.8 Mood Light Setting

1. In time display interface, short press the "COLOR" button to turn on the mood light.
2. Long press the "COLOR" button for 3 seconds to turn off the mood light.
3. When the mood light is on, short press the "COLOR" button to change the color mode of the mood light.
4. Short press the "+" or "-" buttons to change the brightness of the mood light.

6.9 USB Power Supply (Charging)

The USB Output 1 (Type-C) and Output 2 (USB) ports on the product allow you to charge external devices such as cell phones. These ports provide slow charging. Please ensure you use a 5V/1A or 5V/2A adapter for the clock's main power input.

7. Maintenance

• Clean the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ensure the device is unplugged before cleaning.
• Keep the device free from dust and debris to maintain optimal performance.

8. Troubleshooting

• Clock not turning on: Ensure the power cord is securely plugged into both the clock and a working 5V/1A-2A power adapter.
• Display is dim or off: Check the brightness settings using the "DIMMER" button. If Night Mode is active, the display will dim automatically between 18:00-6:00.
• Alarm not sounding: Verify that the alarm is turned on (alarm icon visible) and that the volume is set appropriately. Check the alarm time and mode settings.
• Time not saving after power loss: Ensure the CR2032 button battery is correctly installed and has sufficient charge. This battery is for memory backup only, not for powering the clock.
• Charging external devices is slow: The USB output ports are designed for slow charging. Ensure your power adapter for the clock is at least 5V/1A, preferably 5V/2A for better performance.

9. Specifications

10. User Tips

• The included CR2032 button battery is solely for maintaining time settings during power outages and does not power the clock for daily operation. The clock requires continuous external power via the Type-C cable.
• For optimal performance and to avoid issues, always use a power adapter within the specified range of DC5V/1A-2A.
• If you encounter any problems with the product's use or function, or if the product is defective or damaged, please contact the seller directly for assistance.

11. Warranty and Support

For any product-related issues, technical support, or warranty claims, please contact the seller directly through your purchase platform. They will be able to provide assistance and solutions for any concerns you may have.

Environmental Protection: Electronic products disposal instructions: If the product is damaged and needs to be recycled, please send the product to the nearest recycling division.