Jessinie Mini560 Pro / Mini560

Contents

Jessinie Mini560 Pro/Standard DC-DC Step Down Buck Stabilized Voltage Power Supply Module User Manual

Model: Mini560 Pro / Mini560 Series

1. Introduction

This manual provides essential information for the safe and efficient use of the Jessinie Mini560 Pro and Mini560 series DC-DC Step Down Buck Stabilized Voltage Power Supply Modules. These modules are designed to convert a higher input voltage to a lower, stable output voltage, suitable for various electronic applications such as powering microcontrollers, sensors, and other low-voltage circuits.

Multiple Mini560 Pro and Standard DC-DC Step Down Buck Converter Modules
Figure 1: Assortment of Mini560 Pro and Standard modules, available in 3.3V, 5V, 9V, and 12V fixed output versions.

2. Safety Precautions

  • Always ensure correct polarity when connecting input and output. Incorrect connections can damage the module and connected devices.
  • Do not exceed the maximum input voltage or output current ratings.
  • Avoid short circuits on the output terminals.
  • Handle the module with care to prevent electrostatic discharge (ESD) damage.
  • Ensure adequate ventilation, especially when operating at higher currents, to prevent overheating.
  • Keep the module away from moisture and conductive materials.
  • This module is intended for experienced electronics hobbyists and professionals.

3. Product Overview

The Mini560 series modules are compact and efficient DC-DC buck converters. They are available in various fixed output voltages, including 3.3V, 5V, 9V, and 12V. The "Pro" versions may feature different component layouts or specifications compared to the "Standard" versions.

3.1. Module Identification

Visually inspect your module to identify its version and output voltage. The bottom side of the module typically indicates "Mini 560 PRO" or "Mini 560" and "DC-DC Step-down".

Top view of a Mini560 module showing components
Figure 2: Top view of a Mini560 module, highlighting key components like the inductor (marked "150" or "4R7") and the SS1045 diode.
Bottom view of a Mini560 PRO module with input/output labels
Figure 3: Bottom view of a Mini560 PRO module, showing input (IN+, IN-) and output (OUT+, OUT-) terminals, along with the "Mini 560 PRO" designation.
Bottom view of a Mini560 Standard module with input/output labels
Figure 4: Bottom view of a Mini560 Standard module, also indicating input (IN+, IN-) and output (OUT+, OUT-) terminals, and "Mini 560" designation.

3.2. Dimensions

Dimensions of the Mini560 module
Figure 5: Physical dimensions of the Mini560 module, approximately 18mm x 33mm and 19mm x 30mm.

4. Setup and Connection

Follow these steps to connect and set up your Mini560 module:

  1. Identify Terminals: Locate the input terminals (IN+ and IN-) and output terminals (OUT+ and OUT-) on the module. These are clearly marked on the bottom side of the PCB (refer to Figures 3 and 4).
  2. Input Voltage Connection: Connect your DC power source to the IN+ (positive) and IN- (negative) terminals. Ensure the input voltage is within the module's specified operating range and is sufficiently higher than your desired output voltage for proper regulation.
  3. Output Voltage Connection: Connect your load (the device requiring power) to the OUT+ (positive) and OUT- (negative) terminals.
  4. Verify Connections: Double-check all connections for correct polarity and secure contact before applying power.
  5. Power On: Apply power to the input. The module will then provide the stabilized output voltage.

Warning: Incorrect wiring can cause permanent damage to the module and connected devices.

5. Operating Instructions

The Mini560 module is a fixed-output voltage regulator. Once connected, it will provide the specified output voltage (e.g., 3.3V, 5V, 9V, or 12V) as long as the input voltage is sufficient and the load current does not exceed the module's maximum rating.

  • Input Voltage: The input voltage must be higher than the desired output voltage for proper step-down operation. The minimum voltage difference required for stable operation can vary.
  • Output Current: Monitor the current draw of your load to ensure it stays within the module's maximum continuous output current rating (typically up to 5A, but this can be limited by thermal conditions and specific variant). Exceeding this can lead to overheating and damage.
  • Thermal Management: For continuous operation at higher currents (e.g., above 1.5A-2A, depending on the specific module and input/output voltage difference), consider adding a heatsink or ensuring good airflow around the module to prevent excessive temperature rise.

6. Specifications

Feature Specification
Product Type DC-DC Step Down Buck Stabilized Voltage Power Supply Module
Brand Name Jessinie
Model Mini560 Pro / Mini560 (various output voltages)
Output Voltage Options 3.3V, 5V, 9V, 12V (fixed)
Max Output Current Up to 5A (typical, depends on variant and thermal conditions)
Dissipation Power Low
Application Computer, Smart Electronics Experiment (Arduino, STM)
Condition New
Operating Temperature Normal
Dimensions (approx.) 18mm x 33mm, 19mm x 30mm
Weight (per module) 0.066 kg

7. Troubleshooting

  • No Output Voltage:
    • Check input voltage: Ensure the input voltage is present, within the acceptable range, and sufficiently higher than the expected output.
    • Verify polarity: Confirm that IN+ and IN- are connected correctly to your power source.
    • Inspect for damage: Look for any visible physical damage to the module, such as burnt components or broken traces.
    • Check for short circuits: Ensure there is no short circuit on the output terminals or the connected load.
  • Output Voltage is Incorrect or Unstable:
    • Confirm module variant: Ensure you are using the correct module variant for your desired fixed output voltage (e.g., a 5V module will not output 12V).
    • Check input voltage: Insufficient input voltage can lead to an unstable or incorrect output.
    • Overload: If the load draws too much current, the output voltage may drop. Reduce the load or use a module with a higher current rating.
  • Module Overheating:
    • Excessive load: The module may be supplying too much current. Reduce the load or ensure it's within the module's continuous rating.
    • High input-output voltage differential: A large difference between input and output voltage, combined with high current, generates more heat.
    • Inadequate ventilation: Ensure the module has sufficient airflow. Consider adding a small heatsink if operating at high power.
    • Faulty module: If overheating occurs at low currents (e.g., 1.5A) or under normal operating conditions, the module might be defective.
  • Physical Damage Upon Arrival:
    • Carefully inspect the module immediately upon receipt for any signs of damage (e.g., broken components, cracked PCB).

8. User Tips

  • Verify Model: Some users have noted discrepancies between "Pro" and "Standard" versions, particularly regarding internal components like output diodes and actual current handling capabilities. Always verify the specific model you received matches your requirements.
  • Test Thoroughly: If purchasing multiple modules, it is advisable to test each one individually upon receipt to ensure full functionality, as some users have reported receiving non-functional units.
  • Current Handling: Be aware that while rated for up to 5A, some modules may experience significant heating at lower currents (e.g., 1.5A) depending on the input/output voltage difference and specific variant. Plan for adequate cooling if drawing higher currents.
  • Packaging: Modules are generally well-packaged, but always inspect for damage immediately after delivery.

9. Warranty and Support

For warranty claims, technical support, or further assistance, please contact the seller or manufacturer directly through the platform where the product was purchased. Provide your order details and a clear description of the issue to facilitate a quicker resolution.

© 2023 Jessinie. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.