UnionSine HD-3510 / HD-3511

Contents

UnionSine HDD 3.5" External Hard Drive User Manual

Models: HD-3510, HD-3511

1. Introduction

Thank you for purchasing the UnionSine External Hard Drive. Please read this user manual carefully and keep it for future reference. We offer a one-year free warranty service from the purchase date. We hope our products provide you with a pleasant user experience. To maximize performance, connect your drive to a USB 3.0 port. It is also compatible with USB 2.0.

Note: To protect your data, always follow the safe removal procedures for your operating system when disconnecting your product.

Package Contents:

  • 1 x UnionSine High Capacity Hard Drive
  • 1 x Power adapter
  • 1 x USB 3.2 A-C cable
  • 1 x USB 3.2 C-C cable
  • 1 x Product manual
Contents of the UnionSine External Hard Drive package, including the hard drive, power adapter, USB cables, and manual.
Figure 1: Package Contents
UnionSine 4TB External Hard Drive, showing compatibility with Windows, Apple, and gaming consoles.
Figure 2: UnionSine 4TB External Hard Drive
Video 1: Product overview showcasing design, cooling, USB 3.0 interface, and various use cases.

2. Setup Instructions

2.1. How to Set Up Your External Hard Drive for Windows System

  1. Start your computer. Connect the external hard disk to a USB port on your computer using the USB cable. Ensure the connection is secure.
  2. Note: If you are using a 2.5-inch mobile hard disk (not applicable to this 3.5-inch model which requires external power), it would need to be connected to a power adapter. Turn on the switch and ensure the indicator light is working properly.

  3. After confirming the hard disk is connected, a new disk drive (the last drive in the current system) will appear in your computer system.
  4. Important: If your hard drive is unformatted, you must format it before it can be used normally. To format, navigate to "My Computer" > "Equipment Management" > "Disk Management" > "Formatting" > "Complete Formatting."

2.2. How to Set Up Your External Hard Drive for Mac System

  1. Turn on the power supply of your Mac computer and log into the operating system.
  2. Windows supports NTFS, FAT16, FAT32, and exFAT formats for both reading and writing.
  3. Mac supports FAT16, FAT32, exFAT, and Mac OS Extended (Journaled) formats for both reading and writing.
  4. Mac can read but not write to NTFS formatted drives. FAT32 and FAT16 are referred to as FAT format in Mac systems. While FAT format allows both systems to read and write, the largest single file size for FAT is 4GB. This means an 8GB high-definition movie file, for example, cannot be stored on a FAT-formatted drive regardless of available space.

    Therefore, the exFAT partition format is the only disk partition format that can be read and written by both Windows and Mac systems without a 4GB single file size limit. If you need to partition mobile storage devices, it is recommended to first partition from Windows and then format the Mac-dedicated partitions into Mac OS Extended (Journaled) format.

2.3. How to Set Up Your External Hard Drive for PS4 (for 250GB-2TB models only)

  1. Go to Settings > Devices > USB Storage Devices and select your external hard drive.
  2. Select "Format as Extended Storage" and tap X.
  3. Select "Next" and tap X.
  4. Select "Format" and tap X.
  5. Select "Yes" and tap X.
  6. Select "Okay" and tap X.

From this point forward, any new game or software you install will be located on your external hard drive. Save data and image/video captures will remain on the internal hard drive.

2.4. How to Set Up Your External Hard Drive for Xbox One (for 250GB-2TB models only)

Here's how to get the drive up and running:

  1. Connect the drive to a vacant USB port on your Xbox One.
  2. Select "Yes" when asked how to configure the drive.
  3. Enter a drive name.
  4. If you want to install games on it by default, select "Yes" when prompted.
  5. With your external drive installed and formatted, you're ready to install and copy games onto it. We recommend moving all but the lowest-priority games onto the new drive so that they can benefit from the performance increase it brings.
Diagram showing two steps to connect the external hard drive: 1. Connect power supply to AC adapter. 2. Connect USB cable to computer.
Figure 3: Connection Guide
Rear view of the UnionSine external hard drive showing DC IN port, USB 3.2 Type-C port, and regulatory markings.
Figure 4: Rear Ports and Regulatory Markings

3. Operation

The UnionSine external hard drive is designed for plug-and-play convenience. Once connected and formatted (if necessary), it will be recognized by your operating system and ready for use.

3.1. Safe Removal

To prevent data loss or corruption, always safely remove the external hard drive before disconnecting it from your computer or device. The procedure varies slightly by operating system:

  • Windows: Click the "Safely Remove Hardware and Eject Media" icon in the system tray, then select your hard drive and choose "Eject."
  • Mac: Drag the hard drive icon from your desktop to the Trash, or right-click (or Control-click) the hard drive icon and select "Eject."

3.2. Compatibility and Use Cases

This external hard drive offers broad compatibility and can be used for various purposes:

  • PC Office: Store important documents and large files.
  • 4K Video/Image Storage: Ideal for multimedia files requiring stable and fast reading.
  • TV Recording: Compatible with multi-brand TVs for recording programs.
  • Game Storage: Expand storage for PS4 (up to 8TB for some models) and Xbox games.
  • Cross-platform: Works seamlessly with Windows, Mac, Linux, DVD, and Android systems.
External hard drive connected to a monitor, used as a home edition multimedia storage center for 4K HD media.
Figure 5: Media Storage and Home Data Center
External hard drive next to an Xbox console and controller, illustrating its use for expanding game storage.
Figure 6: Expanding Game Storage for PS4/Xbox
External hard drive next to a desktop computer setup, highlighting its use for upgrading PC storage.
Figure 7: Upgrading PC Storage
External hard drive next to a keyboard and monitor, emphasizing cross-platform compatibility with Windows and Mac systems.
Figure 8: Cross-Platform Compatibility
External hard drive in a vertical orientation next to a TV, showing system compatibility with various devices.
Figure 9: Vertical High-Speed Mass Storage HDD

4. Maintenance

4.1. General Care

  • Perform routine cleaning to remove dust and debris. Avoid using harsh chemicals.
  • Protect the device from impacts, mishandling, and tampering.
  • Ensure proper ventilation to prevent overheating. The device features three-sided concave cooling holes for heat dissipation.
  • The internal design includes anti-vibration silicone and steel screws for improved heat dissipation and reduced noise.
Bottom view of the hard drive, highlighting the anti-slip design with rubber feet for stability.
Figure 10: Anti-slip Design
Top view of the hard drive, showing the three-sided concave cooling holes for efficient heat dissipation.
Figure 11: Three-sided Concave Cooling Holes
Internal diagram of the hard drive showing silica gel soft material and steel screws for improved heat dissipation and noise reduction.
Figure 12: Internal Structure for Heat Dissipation and Noise Reduction
Diagram showing the hard drive in a horizontal position, emphasizing stability due to lower center of gravity.
Figure 13: Horizontal Placement for Stability

4.2. Data Backup

This limited warranty does not cover data loss. It is highly recommended to regularly back up the contents of your drive to a separate storage medium. Consequential damages, incidental damages, and costs related to data recovery, removal, and installation are not recoverable under this warranty.

5. Troubleshooting

  • Drive Not Recognized: Ensure the power supply is connected before connecting the USB cable. It may take a few minutes for the operating system to identify large capacity hard drives; please be patient.
  • Drive Not Appearing in File Explorer/Finder: If the hard drive is new or has been used with a different operating system, it might be unformatted. Refer to the "Setup Instructions" section for formatting procedures for Windows or Mac.
  • Capacity Discrepancy: Hard disk suppliers use decimal arithmetic (1MB=1000KB, 1GB=1000MB), while operating systems use binary arithmetic (1MB=1024KB, 1GB=1024MB). This difference in calculation results in the displayed capacity being slightly less than the nominal capacity. This is normal and not an authenticity issue. The approximate actual capacity can be calculated as: Nominal Capacity * 1000 / 1024 / 1024 / 1024.
  • Performance Issues: Ensure the drive is connected to a USB 3.0 or USB 3.2 Gen2 port for optimal speed. Using a USB 2.0 port will result in slower transfer rates.

6. Specifications

Feature Specification
Brand Name UnionSine
Model Number HD-3511 (also HD-3510 variant)
HDD Capacity 4 TB (available in 4TB~18TB)
Size 3.5"
Interface Type USB 3.2 Gen2 Type-C
Interface Rate 100-120 MB/s (Theoretical up to 160MB/s read, 110MB/s write)
Read Rate 130 MB/S~240MB/S
Write Rate 130 MB/S~240MB/S
Speed 7200rpm
Cache 32 MB
Shell Material Metal & Plastic
Has External Power Supply Yes
Expansion Port SATA
Application Desktop, Laptop, Server, Monitoring
Compatible System Win/Mac/Linux/Android
Compatible Device PC/Laptop/PS4/Xbox/TV
Dimensions 167*48*134mm (Product), 227*203*89mm (Package)
Input 12V-2A
Certification CE, Dot, EAC, EPA, FCC, GMP, RoHS, TGA, UL, KC
Diagram showing the dimensions of the UnionSine external hard drive: 6.5 inches length, 1.7 inches height, 5.2 inches width.
Figure 14: Product Dimensions
Collage of certification logos including CE, UKCA, FCC, PS E, RoHS, IC, indicating product compliance.
Figure 15: Product Certifications

7. Warranty and Support

7.1. Limited Warranty

This product is warranted for a period of 3 years from the date of purchase against defects in materials and workmanship, or such longer period as may be required by law in the country or state where this product is sold, when used normally in accordance with this manual.

This limited warranty does not apply and is void if:

  • The warranty claim is made outside the warranty period or if the proof of purchase is not provided.
  • Any malfunction, defect or failure caused by or resulting from impact, mishandling, tampering, use contrary to the applicable instruction manual, incorrect power line voltage, accident, loss, theft, fire, flood or other Acts of God, shipping damage or damage resulting from repairs performed by unauthorized personnel.
  • Cosmetic damage, including but not limited to scratches, dents and broken plastic on ports.
  • Any software, even if packaged or sold with UnionSine hardware.
  • Any other damages free from defects in material or workmanship.
  • Routine cleaning, normal cosmetic and mechanical wear and tear.
  • A valid warranty document and original purchase invoice or receipt cannot be shown, and the serial number label is altered, changed or torn down, or there is no serial number or the product model/number on the warranty document is inconsistent with the product.

7.2. Support Information

For further warranty information and support, please visit our official website or contact us:

  • Company: Shenzhen Union Integrity Technology Co., Ltd.
  • Address: A205, Changjiang Building, No.254, Jihua Road, Jihua Street, Longgang District, Shenzhen
  • Call: 0755-28305279
  • Support email: unionsine@outlook.com
  • Official Website: www.unionsine.com

8. User Tips

  • Optimal Performance: For best results, always connect the hard drive to a USB 3.0 or USB 3.2 Gen2 port.
  • Space Management: When using the hard drive at near full capacity, it is advisable to leave approximately 10% of the total space free to ensure stable operation and prevent potential overload issues. For example, on a 4TB drive, aim to keep around 400GB free.
  • Included Cables: The product typically comes with two data cables: a USB 3.2 A-C cable and a USB 3.2 C-C cable, offering versatile connectivity options.
  • Noise Level: The internal design incorporates anti-vibration silicone and steel screws to help reduce operational noise.
  • PS4 Compatibility Note: While the drive is compatible with PS4, please note that PS4 extended storage functionality is typically supported for capacities between 250GB and 2TB. For larger capacities, check PS4 system updates or specific model compatibility.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.