1. Introduction
This manual provides essential information for the safe and effective use of your EOENKK RGB/ARGB SYNC HUB Splitter Connector Cable. This product is designed to extend and split RGB (12V 4-pin) or ARGB (5V 3-pin) signals from your computer motherboard to multiple compatible lighting devices within your PC chassis, allowing for synchronized lighting effects.
Please read this manual thoroughly before installation and operation, and keep it for future reference.
2. Safety Information
To ensure safe operation and prevent damage to the product or your computer components, please observe the following safety guidelines:
- Before installation, always ensure your computer is powered off and disconnected from the main power supply.
- Verify that the cable and its connectors are intact and undamaged. Do not use if any part is visibly compromised.
- Use only with compatible RGB (12V 4-pin) or ARGB (5V 3-pin) devices and motherboard headers. Connecting an ARGB (5V 3-pin) device to an RGB (12V 4-pin) header, or vice-versa, can cause irreversible damage to the device, motherboard, or both.
- Avoid using the product in extreme environments (e.g., temperatures below -10°C or above 45°C), or in dusty, humid, flammable, or explosive conditions.
- Do not disassemble, modify, or attempt to repair the product. Unauthorized modifications will void any potential warranty and may lead to malfunction or damage.
- If you notice any abnormal behavior such as overheating or unusual odors, immediately power down your system and disconnect the cable. Contact support if such issues occur.
3. Product Features
- Universal Compatibility: Available in 5V 3-pin ARGB and 12V 4-pin RGB variants to suit different motherboard headers and lighting devices.
- Extended Reach: 30cm (11.81 inches) cable length provides flexibility for routing within your PC chassis.
- Synchronized Lighting: Enables synchronization of multiple RGB/ARGB devices with your motherboard's lighting control software (e.g., ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome Sync).
- Durable Construction: Made from high-quality plastic for reliable performance.
4. Package Contents
Each package typically includes:
- 1 x RGB (12V 4-pin) or ARGB (5V 3-pin) Extension Cable (30cm)
- Corresponding Pin Headers (if applicable for splitter functionality)
5. Specifications
| Attribute | Value |
|---|---|
| Brand Name | EOENKK |
| Type | Other Transfer Cable (RGB/ARGB Extension) |
| Cable Length | 30 cm (11.81 inches) |
| Material | Plastic |
| Color | Black |
| Connector Type | 5V 3-pin ARGB / 12V 4-pin RGB (depending on model) |
| Origin | Mainland China |
| Certification | NONE |
| Package Weight | Approximately 0.013 kg |
| Package Dimensions | 10 cm x 10 cm x 10 cm (approximate) |
6. Installation Guide (Setup)
Follow these steps to correctly install your RGB/ARGB extension cable:
-
Prepare Your System:
- Power off your computer completely and unplug it from the wall outlet.
- Open your PC chassis to access the motherboard and internal components.
-
Identify Connectors:
- Locate the appropriate RGB (12V 4-pin) or ARGB (5V 3-pin) header on your motherboard. Consult your motherboard manual if unsure.
- Identify the corresponding RGB/ARGB lighting device(s) you wish to connect.
Image: 12V 4-pin RGB extension cable with compatible motherboard RGB software logos (AURA RGB, RGB FUSION, MSI Mystic Light Sync, ASRock RGB LED).
Image: Two 30cm cables, one 3-pin and one 4-pin, with corresponding pin headers for connection.
-
Connect the Cable:
- Carefully connect one end of the extension cable to the motherboard's RGB (12V 4-pin) or ARGB (5V 3-pin) header. Ensure the pins align correctly and the connector is fully seated.
- If using a splitter, attach the provided pin headers to the cable's female connectors as needed.
- Connect your RGB/ARGB lighting device(s) to the other end(s) of the extension cable. Again, ensure correct pin alignment (e.g., 12V to 12V, 5V to 5V).
Image: Diagram illustrating the connection of a 12V 4-pin cable with its pin headers.
Image: Diagram illustrating the connection of a 5V 3-pin cable with its pin headers, showing a cable length of 30cm/12 inches.
- Cable Management: Route the cables neatly within your chassis to avoid interference with fans or other moving parts, and to improve airflow.
- Close and Power On: Close your PC chassis, reconnect the power cable, and power on your computer.
7. Operation
This extension cable is a passive component. Its operation is directly tied to your motherboard's RGB/ARGB control capabilities and the software provided by your motherboard manufacturer.
- Software Control: Once the cable and lighting devices are correctly installed, you can control the lighting effects through your motherboard's dedicated software (e.g., ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome Sync).
- Synchronization: The cable facilitates the transmission of RGB/ARGB signals, allowing all connected compatible devices to synchronize their lighting patterns and colors as configured in the software.
- Voltage Compatibility: Ensure that all connected devices and the motherboard header operate at the same voltage (either 5V ARGB or 12V RGB). Mixing voltages will cause damage.
8. Care and Maintenance
Proper care will prolong the life of your cable:
- Keep the cable in a dry and well-ventilated area, away from high temperatures, humidity, and direct sunlight when not in use.
- Avoid excessive bending, twisting, or pulling on the cable, especially near the connectors, to prevent internal wire damage.
- Clean the connectors gently with a dry, lint-free cloth if dust accumulates. Do not use liquids or abrasive cleaners.
- Ensure connectors are fully seated but do not force them, as this can bend pins or damage ports.
9. Troubleshooting
If you encounter issues with your RGB/ARGB extension cable, try the following steps:
- No Lighting/Incorrect Colors:
- Double-check all connections to ensure they are secure and correctly aligned (e.g., 5V ARGB to 5V ARGB, 12V RGB to 12V RGB).
- Verify that your motherboard's RGB/ARGB software is installed and configured correctly.
- Ensure the lighting devices themselves are functional when connected directly to the motherboard (if possible).
- Confirm that the correct voltage cable (5V or 12V) is being used for your devices and motherboard header.
- Loose Connection: If the cable feels loose, ensure the pin headers are properly inserted into the female connectors and that the motherboard header pins are not bent.
- Physical Damage: Inspect the cable for any visible cuts, kinks, or bent pins. If damaged, replace the cable.
- System Instability: If your computer experiences crashes or unexpected behavior after installation, immediately disconnect the cable and re-evaluate your connections. Ensure no pins are shorting or incorrectly connected.
If troubleshooting steps do not resolve the issue, please contact the seller or manufacturer for further assistance.
10. Warranty and Support
For warranty information and technical support, please refer to the terms and conditions provided by your retailer or contact the EOENKK customer service directly. Keep your purchase receipt as proof of purchase.
This product is intended for use as an extension and splitter for computer RGB/ARGB lighting systems. Any damage or malfunction resulting from improper installation, misuse, unauthorized modification, or use with incompatible components is not covered by warranty.
For additional resources, you may refer to the generic 3C User Manual (PDF) for general safety guidelines, available at: Generic 3C User Manual (PDF)