1. Introduction
Thank you for purchasing the STAR WARS PG816-PG821 Building Blocks Minifigure set. This set includes six unique minifigures, featuring Red Guards (PG-816, PG-817, PG-818) and Black Guards (PG-819, PG-820, PG-821), designed for assembly and display. These small building blocks are compatible with Lego and are crafted from durable ABS plastic. This manual provides essential information for safe assembly, use, and maintenance of your new collectible figures.
2. Safety Information and Warnings
- Adult Supervision Required: Children should use this product under direct home supervision.
- Choking Hazard: This product contains small building block particles. Do not swallow them. Keep away from very young children.
- Environmental Protection: Avoid exposing the building blocks to direct sunlight and excessive moisture to prevent damage and discoloration.
- Maintenance: Pay attention to regular maintenance to prevent wear and tear, ensuring the longevity of the figures.
- California Proposition 65 Warning: ⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
3. Package Contents
Your package should contain the following items:
- 6 x Minifigure sets (PG-816, PG-817, PG-818, PG-819, PG-820, PG-821)
- Individual parts for each minifigure, including body, head, helmet/headgear, and accessories (weapons).
- All items are typically packed in an OPP Bag.
Figure 1: Assembled PG816-PG821 Minifigures
4. Assembly Instructions (Setup)
Follow these general steps to assemble your minifigures. While specific instructions for each figure are not provided, the assembly process for small building blocks is typically intuitive.
- Unpack: Carefully open the OPP bag and lay out all the parts for one minifigure on a clean, flat surface. Ensure no small pieces are lost.
- Identify Parts: Separate the body, legs, head, helmet/headgear, and any accessories (like weapons) for the specific figure you are assembling.
- Assemble Body: Attach the legs to the torso.
- Attach Head: Place the head onto the neck stud of the torso.
- Add Headgear: Secure the helmet or headgear onto the head.
- Attach Accessories: Place any weapons or other accessories into the minifigure's hands or attach them to designated points.
- Repeat: Follow these steps for each of the six minifigures.
Ensure all connections are firm but do not force pieces together, as this may cause damage.
5. Operating Instructions (Play & Display)
Once assembled, your minifigures are ready for play or display.
- Posing: The minifigures have articulated parts (head, arms, legs) allowing for various poses. Gently adjust limbs to create dynamic scenes.
- Interactivity: These blocks are compatible with other small building block systems, allowing for integration into larger constructions or play scenarios.
- Display: For collectors, these figures make excellent display pieces. Place them on shelves, in display cases, or as part of a larger STAR WARS themed collection.
6. Maintenance
Proper care will ensure your minifigures remain in excellent condition for years.
- Cleaning: To clean the figures, gently wipe them with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive cleaners.
- Storage: Store the building blocks in a cool, dry place, away from direct sunlight and high humidity. Extreme temperatures can cause material degradation or discoloration.
- Handling: Handle figures by their main body parts rather than small accessories or delicate joints to prevent breakage.
7. Troubleshooting
- Missing Pieces: If you find any pieces missing upon opening the package, carefully check the packaging material. If still missing, contact the seller for assistance.
- Loose Connections: If parts feel loose, ensure they are correctly aligned and gently pressed together. Avoid excessive force.
- Difficulty Assembling: Refer to the general assembly steps. Sometimes, rotating a piece slightly can help it fit better.
8. Specifications
| Feature | Detail |
|---|---|
| Model Numbers | PG816, PG817, PG818, PG819, PG820, PG821 |
| Type | Assemble Minifiguring |
| Brand Name | STAR WARS |
| Material | ABS Plastic |
| Block Size | Small building block (Compatible with Lego) |
| Figure Height | Approximately 4.5 CM |
| Recommended Age | 6-12 Years |
| Packaging | OPP Bag |
| Origin | Mainland China |
| Certification | CE |
9. User Tips
- Sorting: Before assembly, sort all small pieces by type or color to make the building process smoother and faster.
- Display Bases: Consider using small display bases (not included) to give your minifigures more stability when posing or displaying.
- Creative Play: Encourage imaginative play by integrating these figures into existing building block sets or creating new scenarios.
10. Warranty and Support
This product is designed for durability and enjoyment. For any issues related to manufacturing defects or missing parts, please contact the seller or retailer from whom you purchased the product. Keep your proof of purchase for warranty claims.
For further assistance or inquiries, please refer to the contact information provided by your retailer.
