1. Safety Attention
When the power is on, the soldering iron tip temperature can reach 100°C-450°C (212°F-842°F). Improper use may lead to burns or fire. Please strictly observe the following safety guidelines:
- Do not touch the iron tip or any metal area near it when hot.
- Do not use the soldering station near flammable materials.
- The soldering iron tip is very hot; it may cause dangerous accidents. Always turn off the power after use.
- When changing parts, turn off the machine and allow the tip to cool to room temperature.
- To avoid damage to the soldering station, ensure you observe the following:
- This product uses a rated voltage and frequency (AC100-240V, 50/60Hz). Refer to the label on the back of the machine.
- It is strictly prohibited to use this product if it is damaged, especially if the power cable is compromised.
- This product uses a three-wire grounding plug and must be inserted into a three-hole grounded socket. If an extension cord is needed, use a grounded three-wire power cord.
- Do not use the soldering iron for any work other than welding.
- Do not knock the soldering tip on the workbench to clean it, as this may seriously damage the soldering tips.
- When replacing parts, use only original factory parts.
- Do not tamper with the soldering iron without proper safety precautions.
- Do not wet the soldering iron, and do not use it when your hands are wet.
- Smoke will be produced during welding; ensure adequate ventilation in your workspace.
- Children are unaware of the dangers of electrical products. Do not use or store this station in a place accessible to children. Do not allow children to get near or touch this station.
2. Product Overview and Specifications
The AIFEN A5 Soldering Station is a high-performance electronic tool designed for soldering and rework tasks. It features rapid heating and precise temperature control, compatible with various JBC soldering iron tips.

Key Features:
- 120W Power: Ensures rapid heating and stable temperature.
- Fast Heat-up: Heats up to 380°F in 3 seconds.
- Adjustable Temperature: Range from 100°C-450°C (212°F-842°F).
- Compatibility: Supports C115, C210, and C245 series soldering iron tips.
- Integrated Design: Features a handle, temperature display, adjustment buttons, and a cleaning sponge.

Technical Specifications:
| Specification | Value |
|---|---|
| Model Number | AIFEN-A5 |
| Input Voltage | AC100-240V 50/60Hz |
| Power | 120W (Max 160W) |
| Temperature Control Range | 100°C-450°C (212°F-842°F) |
| Compatible Tips | C115, C210, C245 series |
| Certification | CE |
| Origin | Mainland China |
3. Setup and Installation
Before connecting or disconnecting the handle or any components, ensure the power is turned off to prevent damage to the control circuit board.
Unboxing and Initial Setup:
- Connect the handle device to the handle socket on the main host machine.
- Install the required heating core/soldering tip into the handle.
- Place the soldering station on a stable surface and position the handle in its designated rack.
- Connect the power supply to the station and a suitable grounded outlet.
- Turn on the power switch. The display window will show "---", indicating the soldering station is in standby mode.
4. Operating Instructions
Temperature Setting:

- Increasing Temperature: Press the "▲" button once to increase the set temperature by 1°C. The display will show the new set temperature. Press and hold the "▲" button for at least one second for rapid temperature increase until the desired temperature is reached, then release.
- Decreasing Temperature: Press the "▼" button once to decrease the set temperature by 1°C. The display will show the new set temperature. Press and hold the "▼" button for at least one second for rapid temperature decrease until the desired temperature is reached, then release.
Celsius/Fahrenheit Conversion:
With the unit powered on, press and hold the "▲" button to switch between Celsius and Fahrenheit display modes.
Temperature Calibration:
While the unit is powered off, press and hold both the "▲" and "▼" buttons simultaneously, then power on the unit. This will enter the temperature calibration mode (±99 degrees). Use the "▲" and "▼" buttons to adjust the temperature. The setting will automatically save and exit after 3 seconds of inactivity.
Standby Temperature Setting:
When the host is turned off, press and hold the "▼" button, then turn on the power. You can then enter the standby temperature setting interface. The available standby temperatures are: 0, 150, 180, 200°C. Setting to 0°C will turn off the standby temperature function. The setting will automatically save and exit after 3 seconds.
Handle Control Operation (Wire-Controlled Version Only):
For wire-controlled versions of the AIFEN A5, the handle itself may have temperature adjustment buttons. These functions are not available on standard versions.
- Handle Temperature Adjustment: In working state, press the handle temperature adjustment button to increase/decrease the temperature.
- Handle Control Machine Switch: In working state, press and hold the two temperature adjustment buttons of the handle at the same time to turn on/off the interface of the host.
5. Maintenance
Soldering Iron Tip Care:
- Optimal Temperature: High temperatures can weaken tip function. Always choose the lowest possible temperature for your task. This tip has excellent temperature recovery, allowing for effective soldering at lower temperatures, which protects temperature-sensitive components.
- Regular Cleaning: Use a clean sponge or copper wire ball to clean the tip regularly. Oxide and carbide from residual flux can damage the tip, cause welding errors, or reduce heat conduction.
- Cleaning When Not in Use: Do not leave the iron at high temperatures for extended periods when not in use, as this can cause the solder on the tip to oxidize, significantly reducing its heat conduction.
- After Use: After each use, clean the soldering iron tip and coat it with a new layer of tin to prevent oxidation.
Checking and Cleaning the Soldering Iron Tip:
Note: Do not file the iron to remove oxide.
- Set the temperature to 250°C (482°F).
- Once the temperature is stable, clean the tip with a cleaning sponge and check its condition.
- If the tin part of the soldering iron contains black oxide, coat the soldering iron with a new tin layer, then wipe it with a clean sponge until the oxide is completely removed. Re-coat the tip with a new tin layer.
- If the tip is deformed or shows heavy rust, it must be replaced.
Heating Core Replacement:
This soldering station uses a heating core integrated with the soldering head. To replace, ensure the unit is powered off and cooled down. Simply unplug the old one and plug in the new one.
6. Troubleshooting
Specific troubleshooting steps are not detailed in the provided materials. For common issues, ensure all connections are secure, the power supply is stable, and the soldering tip is clean and properly installed. If the unit displays an error code or malfunctions, refer to the full user manual (PDF) or contact customer support.
7. User Tips
- Tip Compatibility: The AIFEN A5 is designed to be compatible with JBC C115, C210, and C245 series soldering iron tips. Ensure you use the correct tip type for your specific soldering needs.
- First Use Tip Conditioning: After receiving the goods and before the first use, heat the new soldering iron tip for five minutes. This can effectively improve the stability and performance of the soldering iron tip during operation.
8. Warranty and Support
Information regarding warranty, returns, and customer support is not available in the provided product description. Please refer to the official seller's website or contact the seller directly for details on warranty coverage and support options.
For a more detailed guide, you can refer to the User Manual (PDF).