1. Setup and Battery Installation
Before operating your RASTAR 1/16 Dodge Charger R/T RC Car, please follow these steps for proper setup and battery installation.
1.1 Unboxing and Initial Inspection
Carefully remove all components from the packaging. Inspect the RC car and remote controller for any damage. Ensure all parts listed in the package contents are present.

1.2 Battery Requirements
The RASTAR 1/16 Dodge Charger R/T RC Car comes in two versions with different power requirements:
- Charging Version: The car uses a USB rechargeable battery (included). The remote controller requires 2 x AA batteries (not included).
- Regular Version: The car requires 5 x AA batteries (not included). The remote controller requires 2 x AA batteries (not included).
Please check your specific product version to determine the correct battery type.
1.3 Installing Batteries
- For the RC Car (Regular Version): Locate the battery compartment on the underside of the car. Open the cover, insert 5 x AA batteries, ensuring correct polarity (+/-). Close the cover securely.
- For the RC Car (Charging Version): Connect the included USB charging cable to the car's charging port and a suitable USB power source. Refer to the charging indicator for status.
- For the Remote Controller: Locate the battery compartment on the back of the remote controller. Open the cover, insert 2 x AA batteries, ensuring correct polarity (+/-). Close the cover securely.


1.4 Pairing the Remote Controller
Turn on both the RC car and the remote controller. The controller and car should automatically pair. If they do not, turn both off and on again, ensuring they are close to each other. The remote operates on a 2.4GHZ frequency for stable connection.
2. Operating Instructions
Once the car and remote are set up and paired, you can begin operating your RASTAR 1/16 Dodge Charger R/T.
2.1 Basic Controls
- Forward: Push the throttle lever/button forward.
- Reverse: Pull the throttle lever/button backward.
- Stop: Release the throttle lever/button to its neutral position.
- Turn Left: Turn the steering wheel/button left.
- Turn Right: Turn the steering wheel/button right.
2.2 Special Features
- LED Headlamps and Taillights: The LED headlamps will illuminate when the car moves forward, and the taillights will illuminate when the car reverses.
- Sounds: The car starts with realistic sounds.
- Openable Doors & Rear Hood: The car features doors and a rear hood that can be opened manually to reveal interior and engine details.



3. Maintenance
Proper maintenance will ensure the longevity and optimal performance of your RC car.
3.1 Cleaning
Wipe the car and remote controller with a soft, damp cloth. Do not use harsh chemicals or solvents. Avoid submerging the car or remote in water.
3.2 Battery Care
- Always remove batteries from the remote controller and the car (if using AA batteries) when not in use for extended periods to prevent leakage.
- For the USB rechargeable battery, ensure it is fully charged before storage and periodically recharge it if stored for a long time.
3.3 Storage
Store the RC car and remote controller in a cool, dry place away from direct sunlight and extreme temperatures.

4. Troubleshooting
If you encounter any issues with your RC car, refer to the following common problems and solutions:
4.1 Car Not Responding to Remote
- Check Batteries: Ensure all batteries in both the car and remote controller are correctly installed and have sufficient charge. Replace if necessary.
- Power On: Make sure both the car and remote controller are switched ON.
- Pairing: Turn both devices off and on again to re-establish the connection.
- Distance: Ensure you are within the effective remote control range (up to 30m).
4.2 Short Remote Control Range
- Battery Level: Low batteries in either the car or remote can reduce range. Replace or recharge.
- Interference: Avoid operating near other radio-controlled devices, large metal objects, or strong electromagnetic fields that might cause interference.
4.3 Lights Not Working
- Direction: Headlights only activate when moving forward, taillights when reversing. Ensure the car is moving in the correct direction.
- Battery Level: Low battery power can affect auxiliary functions like lights.
5. Specifications
| Feature | Detail |
|---|---|
| Model | Dodge Charger R/T 1970 |
| Scale | 1:16 |
| Dimensions (L x W x H) | 33 cm x 12.9 cm x 9 cm |
| Material | Metal, Plastic |
| Speed | Up to 8.2 km/h |
| Remote Control Distance | Up to 30 meters |
| Frequency | 2.4 GHz |
| Car Power (Charging Version) | USB Rechargeable Battery |
| Car Power (Regular Version) | 5 x AA Batteries (not included) |
| Controller Power | 2 x AA Batteries (not included) |
| Features | Full Functions (Forward, Reverse, Stop, Turn Left & Right), LED Headlamps & Taillights, Engine Sounds, Manually Openable Doors & Rear Hood, Independent Suspension System, Front Wheel Shock Absorption, Rear Wheel Differential Mechanism. |




6. User Tips
Here are some helpful tips based on common user inquiries:
- Battery Clarity: Remember to check if you have the 'Charging Version' (USB rechargeable car battery) or 'Regular Version' (AA batteries for car) to ensure you purchase or prepare the correct batteries. Both versions require 2 x AA batteries for the remote controller.
- Dimensions: The car measures 33 cm in length, 12.9 cm in width, and 9 cm in height. This 1:16 scale model is a substantial size for an RC car.
- Packaging Options: The product may come in either an 'Original Box' or a 'Store Box'. Both contain the same product, so choose the option that best suits your preference, especially if it's a gift.

7. Warranty and Support
This product is manufactured by RASTAR. For any technical support, warranty claims, or further assistance, please refer to the contact information provided with your purchase documentation or contact the seller directly. Always retain your proof of purchase for warranty purposes.