lemorele TC100

Contents

Lemorele TC100 USB C HUB Multiport Adapter User Manual

Model: TC100 | Brand: Lemorele

1. Product Overview

The Lemorele TC100 Multi-Function USB-C HUB is a versatile 13-in-1 docking station designed to expand the connectivity of your laptop, tablet, and other USB-C enabled devices. It integrates a wide array of ports to meet diverse expansion needs, including USB-A, USB-C for data transfer, HDMI, VGA, RJ45 Gigabit Ethernet, and SD/TF card slots.

This adapter transforms a single USB-C port into a comprehensive workstation, supporting high-speed data transfer, stable wired network connections, and multiple display outputs for enhanced productivity.

Lemorele 13-in-1 USB C Hub with various ports labeled

Figure 1: Lemorele TC100 USB C HUB with all ports visible.

Video 1: Product demonstration of the Lemorele TC100 USB C HUB.

2. Package Contents

The package includes:

  • 1 x Lemorele TC100 USB C HUB Multiport Adapter
  • 1 x User Manual (this document)

3. Specifications

FeatureSpecification
ModelTC100
BrandLemorele
Interface TypeUSB Type-C
StandardUSB 3.0
Total Ports13-in-1
FunctionsHDMI-Compatible, Card Reader (SD/TF), RJ45 Gigabit Ethernet, USB Data, VGA, Audio, Power Delivery
HDMI OutputUp to 4K@30Hz (single HDMI), 1080P (dual HDMI)
VGA OutputUp to 1080P@60Hz
USB-A 3.0 Data TransferUp to 5 Gbps
USB-A 2.0 Data TransferUp to 480 Mbps
RJ45 Ethernet10/100/1000Mbps Gigabit Ethernet
Power Delivery (PD)Up to 100W (13W for hub, 87W for laptop)
Card ReaderSD and TF card slots (simultaneous read/write)
Audio Jack3.5mm (audio output only)
Dimensions (approx.)Length: 29 cm, Width: 12 cm, Height: 3 cm
Weight (approx.)0.134 kg
CertificationCE

Note: The specific port configuration may vary slightly depending on the exact model variant purchased. Refer to your product packaging for precise details.

Diagram showing the various ports on the Lemorele 13-in-1 Multiport Adapter

Figure 2: Detailed view of the Lemorele TC100 ports.

4. Setup Instructions

4.1 Compatibility Requirements

  • Host Device USB-C Port: Your laptop's or device's USB-C port must support audio and video output (DisplayPort Alternate Mode), data transfer, and Power Delivery (PD) functions for full functionality.
  • Operating Systems: Compatible with Windows 10 and above, and macOS 10.15 and above. Android and Linux are generally not supported for full display functionality.
  • MacBook Support: Specifically supports MacBook Pro/Air models.

4.2 Connecting the HUB

  1. Connect the integrated USB-C cable of the Lemorele TC100 HUB to a compatible USB-C port on your host device (laptop, tablet, etc.).
  2. Power Connection (Recommended): For stable operation, especially when connecting multiple high-power devices or charging your laptop, connect a PD power adapter (up to 100W recommended) to the HUB's USB-C PD port. This ensures sufficient power for both the HUB and the connected devices.
  3. Connect your peripherals (monitors, USB drives, Ethernet cable, SD/TF cards, audio devices) to the corresponding ports on the HUB.
Laptop connected to the hub with stable Gigabit Ethernet and power delivery

Figure 3: Example setup with laptop, hub, Ethernet, and power.

4.3 Important Setup Notes

  • USB-A to USB-C Adapters: Connecting the HUB via a USB-A to USB-C adapter may result in incomplete functionality, particularly for HDMI/VGA audio and video output. Direct USB-C connection is required for full features.
  • USB-C Extension Cables: Using a USB-C extension cable may affect signal transmission and is not recommended, as it can lead to display issues.
  • Nintendo Switch: When connecting the HUB to a Nintendo Switch, use the original Switch power adapter or a power adapter of 45W or higher for stable operation.

5. Operating Instructions

5.1 Display Modes (Windows)

To configure your display settings on Windows:

  • Press Windows + P keys to quickly select a display mode (PC screen only, Duplicate, Extend, Second screen only).
  • Alternatively, navigate to "System Settings" > "Display Settings" to adjust the display mode and resolution.

5.2 Display Modes (macOS)

To configure your display settings on macOS:

  • Open "System Preferences" (or "System Settings" on newer macOS versions) and go to the "Displays" option.
  • From there, you can choose to set the display to mirror (duplicate) or extend mode.
Laptop connected to three external monitors via the hub, demonstrating extended display

Figure 4: Triple monitor setup using the Lemorele TC100 HUB.

5.3 Data Transfer

Connect your USB flash drives, external hard drives, or other USB devices to the USB-A 3.0 or USB-A 2.0 ports for high-speed data transfer. The USB-C data transfer port supports connecting USB-C storage devices.

Hub connected to a laptop with two USB flash drives, illustrating high-speed data transfer

Figure 5: High-speed data transfer with USB drives.

5.4 SD/TF Card Reader

Insert your SD or TF cards into the dedicated slots to read and write data simultaneously. This is ideal for photographers and designers.

Reading and writing SD/TF cards simultaneously using the hub

Figure 6: Using the integrated SD/TF card reader.

5.5 Gigabit Ethernet

Connect an Ethernet cable to the RJ45 port for a stable and fast wired network connection, supporting speeds of 10/100/1000Mbps.

5.6 Audio Output

Connect headphones or speakers to the 3.5mm audio jack for high-quality audio output. Ensure your laptop's audio output settings are switched to LCD or HDMI audio output for the sound to route through the HUB.

6. Troubleshooting

  • No display when connecting to an HDMI monitor: Ensure your laptop's USB-C port supports audio and video output. If it does, try disconnecting the HUB, shutting down the laptop, holding the power button for 40 seconds to discharge static, then reconnecting.
  • Cannot set higher resolution with multiple HDMI monitors: On Windows, the maximum supported resolution for multiple HDMI monitors is 1080P@60Hz. For a single HDMI monitor, it can be up to 4K@30Hz, depending on laptop and monitor capabilities. On macOS, the maximum supported resolution is 4K@30Hz.
  • MacBook triple-screen extended display not working: macOS does not support MST (Multi-Stream Transport) technology. Therefore, only mirroring (AAA) or duplicating the same extended display (ABB) is supported, not true triple-screen extended mode.
  • Cannot connect a USB-C monitor: The HUB's USB-C PD port is for power input only, and the USB-C data port is for storage devices. Use the HDMI or VGA ports to connect external monitors.
  • No audio output from 3.5mm jack: Confirm your laptop's USB-C port supports audio/video output. Switch the laptop's audio output settings to LCD or HDMI audio output. Ensure the connected monitor has HDMI audio capabilities if routing through it. The 3.5mm port only supports audio output, not microphone input.
  • External hard drive not recognized or disconnecting: External hard drives may draw more power than the laptop's USB-C port can supply. Connect a PD power adapter to the HUB's USB-C PD port to ensure a stable power supply.
  • No charging indication or slow charging: The HUB requires at least 13W for operation. Use a higher wattage PD power adapter (up to 100W recommended) to ensure sufficient power for both the HUB and your laptop. Confirm your laptop's USB-C port supports PD charging.
  • SD card not read: Check if the SD card is inserted correctly and ensure its file format is compatible with your device.
  • Ethernet intermittently disconnecting: Verify the Ethernet cable is connected properly and check for IP address conflicts in network settings. If issues persist, download the latest network drivers from the official website.
  • Drivers: The HUB is generally plug-and-play and does not require manual driver installation.

7. User Tips

  • Always ensure your host device's USB-C port supports DisplayPort Alternate Mode (DP Alt Mode) and Power Delivery (PD) for full functionality of the hub's video output and charging capabilities.
  • For optimal performance and to avoid power-related issues, especially when using multiple high-power devices (like external hard drives or multiple monitors), always connect a suitable PD power adapter to the hub's PD input port.
  • If you experience display issues, try restarting your computer with the hub already connected. This can sometimes resolve detection problems.
  • Keep your operating system and device drivers updated to ensure the best compatibility and performance with the docking station.

8. Maintenance

  • Avoid exposing the device to humid or high-temperature environments for extended periods to prevent damage.
  • To prolong the device's lifespan, avoid frequently plugging and unplugging cables unnecessarily.
  • Clean the device with a soft, dry cloth. Do not use liquid cleaners or aerosols.

9. Warranty and Support

For any assistance or technical support, please contact us:

  • Email Support: support@lemorele.com
  • Online Support: Log in to your account on the purchase platform, go to "Your Orders," select "Problem with Order" next to the relevant order, and send a message through "Contact Seller."

An additional user manual in PDF format is available for download: View User Manual (PDF)


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.