1. Introduction
Thank you for choosing the BUVAYE TS03 Car Jump Starter & 150PSI Air Pump. This versatile device combines a powerful car jump starter, a portable air compressor, an emergency power bank, and a multi-mode LED light. Designed for convenience and safety, it is an essential tool for any vehicle owner. Please read this manual thoroughly before use to ensure proper operation and to maximize the product's lifespan.
Figure 1: BUVAYE TS03 Jump Starter and Air Pump with included accessories.
2. Important Safety Warnings
- Always ensure the product power is over 75% for optimal jump-starting performance. Performance may decline with lower battery levels.
- The pump pressurization process generates heat. DO NOT inflate continuously for more than 10 minutes to prevent overheating. Allow a 5-8 minute cooling period between uses.
- For safety, avoid direct prolonged exposure to sunlight or use in humid conditions, as this can damage the mainboard and cause short circuits.
- The intelligent clamp features a built-in protection system. Always use the silicon air hose cover on the connection head to prevent burns from heat generated during compressor pressurization.
- Keep out of reach of children.
- Do not disassemble or modify the device.
- Store in a cool, dry place.
3. Package Contents
Please check the package for the following items:
- 1 x BUVAYE TS03 Jump Starter & Air Pump Unit
- 1 x Multi-Languages Instruction Manual
- 1 x Type-C Charging Cable
- Various Nozzle Adapters (for different inflatables)
- 1 x Jumper Cable with Smart Clamp
- 1 x Storage Bag
- 1 x Air Hose
Figure 2: All items included in the BUVAYE TS03 package.
4. Product Features
- 12V Vehicle Jump Starter: Equipped with an 8,000-10,000 mAh high-rated lithium polymer battery, providing a peak current of 2,000A. Capable of starting 12V vehicles with up to 7.0L gasoline or 5.0L diesel engines. Can perform over 20 starts on a full charge.
- Compact Air Compressor: Features a maximum pressure of 150 PSI and an air flow of 25L/min. Can fully inflate a car tire (0-36 PSI) in approximately 4 minutes or refill a tire (28-35 PSI) in 30 seconds. A full charge allows inflation of 4 car tires from 0-36 PSI or 12 car tires from 28-36 PSI.
- Intelligent Inflation Modes: Offers 4 default inflation modes for various needs, with accurate real-time pressure monitoring and an auto-stop function to prevent over-inflation. The reinforced rubber nylon air hose is explosion-proof, freeze-proof, and wear-resistant.
- Multi-Mode LED Lighting: Includes 2-color LED lighting with 3 modes: Flashlight, Strobe, and SOS, useful for roadside emergencies, camping, or general illumination.
- Emergency Power Bank: Provides 5V/2A USB-A output for charging mobile phones, earphones, tablets, and other devices. The unit itself charges via 5V/2A Type-C input, reaching full charge in 4-5 hours.
- 10-in-1 Protection Smart Clamp: The upgraded intelligent clamp incorporates a built-in protection system offering multiple safeguards for both the product and your car battery, including short-circuit, over-charge, reverse-charge, over-temperature, over-voltage, and output protection.
- Durable Design & Clear Display: Constructed with solid ABS & PC material shell. Features an HD Large Digital LCD Screen for clear readings and simple buttons for user-friendly operation.
5. Setup
5.1 Initial Charging
Before first use, fully charge the BUVAYE TS03 unit using the provided Type-C charging cable. Connect the Type-C cable to the device's input port and a suitable 5V/2A USB power adapter (not included). The charging indicator on the screen will show progress. A full charge typically takes 4-5 hours.
5.2 Attaching Jumper Cables
For jump-starting, ensure the unit is adequately charged (preferably over 75%).
- Insert the jumper cable's blue connector firmly into the jump starter's output port.
- Connect the red clamp to the positive (+) terminal of the car battery.
- Connect the black clamp to the negative (-) terminal of the car battery.
Figure 3: Visual guide for jump start and inflation procedures.
5.3 Attaching Air Hose
For tire inflation, attach the air hose to the unit.
- Connect the air hose to the inflation port on the device.
- Securely clip the tire nozzle onto the tire valve stem.
- Select the appropriate nozzle adapter for other inflatables (e.g., balls, air mattresses) and attach it to the air hose.
6. Operating Instructions
6.1 Jump Starting a Vehicle
- Ensure the jump starter is charged above 75%.
- Connect the jumper cables to the jump starter and then to the car battery terminals as described in Section 5.2.
- Once connected, the smart clamp will indicate readiness (e.g., a green light).
- Start your car's engine.
- Once the car starts, immediately remove the jumper cables from the car battery, then disconnect from the jump starter.
Figure 4: The jump starter connected to a car battery, ready to boost.
6.2 Inflating Tires and Other Items
- Attach the air hose and nozzle to the item to be inflated (refer to Section 5.3).
- Turn on the device. The LED screen will display the current pressure.
- Use the '+' and '-' buttons to set the desired pressure. You can also cycle through preset modes (car, motorcycle, bicycle, ball) using the mode button.
- Press the power button to start inflation. The device will automatically stop once the preset pressure is reached.
- Disconnect the air hose from the item and the device.
Figure 5: The BUVAYE TS03 actively inflating a car tire.
Figure 6: The clear LED screen provides accurate pressure readings during inflation.
Figure 7: The device can inflate a car tire from 0-36 PSI in approximately 4 minutes with an auto-stop function.
Figure 8: The intuitive controls and LED screen make setting inflation modes easy.
Figure 9: The BUVAYE TS03 is suitable for various inflation needs, including cars, motorcycles, bicycles, and balls.
6.3 Using as a Power Bank
Connect your electronic devices (smartphones, tablets, etc.) to the USB-A output port on the BUVAYE TS03 using their respective charging cables. The device will begin charging your connected item.
Figure 10: The BUVAYE TS03 acting as a power bank, charging a smartphone.
Figure 11: The power bank feature can charge multiple devices like phones and tablets.
6.4 LED Lighting Functions
The BUVAYE TS03 features multiple LED light modes for various situations:
- Flashlight: Provides steady illumination for general use.
- Strobe Light: A flashing light mode for attracting attention.
- SOS Light: Emits the international Morse code distress signal (three short, three long, three short flashes).
To activate and cycle through the LED light modes, press the dedicated light button on the device's control panel.
Figure 12: The BUVAYE TS03 offers multiple LED light modes for different emergency and utility scenarios.
Video 1: Demonstrates the jump-starting, tire inflation, power bank, and LED light functions of the BUVAYE TS03.
7. Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the unit in its storage bag in a cool, dry place, away from direct sunlight and moisture.
- Battery Care: For optimal battery life, it is recommended to fully charge the device every 3-6 months, even if not in use.
- Accessory Inspection: Regularly inspect the jumper cables, air hose, and nozzle adapters for any signs of wear or damage. Replace if necessary.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Car does not jump start. | Low battery on jump starter. Incorrect connection. | Ensure jump starter is charged above 75%. Verify correct connection of red (+) and black (-) clamps. |
| Air pump is not working. | Air hose not properly connected. Device battery low. Faulty unit. | Ensure air hose is securely attached to both the device and the tire valve. Charge the device. If the issue persists after checking connections and charge, contact support. |
| Inflation stops prematurely or doesn't reach desired pressure. | Preset pressure reached. Leak in tire/inflatable. Air hose not sealed. | Check if the preset pressure has been reached (auto-stop feature). Inspect tire/inflatable for leaks. Ensure air hose is tightly clipped to the valve. |
| Device gets hot during inflation. | Normal operation. Continuous use. | This is normal. Do not inflate continuously for more than 10 minutes. Allow 5-8 minutes for cooling. Use the silicon air hose cover. |
| Phone/tablet not charging. | Device battery low. Incorrect cable. | Charge the BUVAYE TS03. Ensure you are using a functional USB cable compatible with your device. |
9. Specifications
| Feature | Specification |
|---|---|
| Brand Name | BUVAYE |
| Model | TS03 |
| Peak Current | 2000A |
| Battery Capacity | 8000/10000mAh (Lithium Polymer) |
| Rated Voltage | 14.8V |
| Vehicle Voltage | 12 V |
| Conversion Rate | >90% |
| Item Weight | 1.3kg |
| Working Power | 29.6/37Wh |
| Inflation Pressure | 150PSI (Max) |
| Pressure Unit | PSI, BAR, KPA, KG/CM² |
| Pump Cylinder Diameter | 22mm |
| Air Volume | 25L/min |
| Charging Time (Device) | 4-5 hours (via Type-C 5V/2A input) |
| Output | USB-A: 5V/2A |
| Special Features | USB, Lighting, Warning Light, SOS Lighting, Power Bank, Hand-Held |
| Number of Built-in Batteries | 4 |
| Certifications | CE, FCC, MSDS, ROHS, UL |
10. User Tips
- For reliable jump-starting, always ensure the unit's battery level is above 75%.
- When using the air pump, remember to take short breaks (5-8 minutes) after 10 minutes of continuous operation to prevent overheating and prolong the device's life.
- Keep the device away from extreme temperatures, direct sunlight, and high humidity to protect its internal components.
- Always use the provided silicon air hose cover during inflation to protect yourself from potential heat generated by the compressor.
11. Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact the official BUVAYE customer service. Refer to your purchase documentation for specific contact details.
