Bileeko Vehicle Wireless Reverse Camera 7 inch LCD Monitor

Contents

Bileeko Vehicle Wireless Reverse Camera 7 inch LCD Monitor

Instruction Manual

Model: Vehicle Wireless Reverse Camera 7 inch LCD Monitor

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Bileeko Vehicle Wireless Reverse Camera and 7-inch LCD Monitor system. Designed for a wide range of vehicles including trucks, buses, RVs, trailers, and excavators, this system enhances safety and convenience by providing a clear rear view. The wireless design ensures an easy setup, and the system can function as a full-time rear view monitor or a dedicated backup camera.

Package Contents

Please verify that all items listed below are included in your package:

  • 1 x 7-inch Car Monitor
  • 1 x Backup Camera
  • 2 x Antennas
  • 1 x Car Charger
  • 1 x Holder (for monitor)
  • 2 x Power Cables (for camera)
  • 1 x Remote Controller
  • 1 x Two-sided Adhesive Tape
  • 1 x Instruction Manual (this document)
Complete package contents of the Bileeko wireless reverse camera system
Figure 1: All components included in the package.

Specifications

Wireless 7-inch LCD Car Monitor

  • Screen Size: 7 inch
  • TV System: NTSC/PAL
  • Power Consumption: 6W
  • Housing: ABS
  • Color: Black
  • Power Supply: DC 12V - 24V
  • Environment Humidity: 10%-90%
  • Working Temperature: -20℃ to +60℃

Wireless Backup Camera

  • Construction: Metal body with bracket
  • Image Sensor: Color CMOS
  • Waterproof Rating: IP67
  • Effective Pixels: NTSC: 648x488 pixels
  • Horizontal Resolution: 480 TV lines
  • Power Supply: DC 12V-24V
  • Operating Temperature: -30℃ to +75℃ RH95%MAX
  • Storage Temperature: -40℃ to +95℃ RH95%MAX
  • Night Vision: 18 IR LED
  • Viewing Angle: 130°

General Product Properties

PropertyValue
Guiding LineNo
Lens MaterialPlastic + Glass
Length of Video Cable10M
Shell MaterialPlastic
Wire or WirelessWireless
Alarm TypeAlarm Systems, Remote Starters, Vehicle Backup Cameras, Front, Front Side, Rear Side
Brand NameBileeko
OriginMainland China
CertificationCE
MaterialPlastic
Display7" LCD Rear View Monitor
Resolution648x488 Pixels
Item TypeVehicle Backup Camera
Item NameParking Assistance System

Setup Instructions

1. Monitor Installation

  1. Choose a suitable location on your dashboard or windshield for the monitor, ensuring it does not obstruct your view.
  2. Attach the holder to the monitor and secure it to your chosen location using the adhesive tape or screws (if applicable).
  3. Connect the monitor to power using the provided car charger (cigarette lighter adapter) or by wiring it directly to a 12V-24V power source in your vehicle.
7-inch LCD monitor installed on a vehicle dashboard
Figure 2: Example of monitor installation on a dashboard.

2. Camera Installation

  1. Select a mounting location for the camera at the rear of your vehicle, ensuring a clear view and protection from damage. The camera is waterproof (IP67 rated).
  2. Secure the camera using its bracket.
  3. Connect the camera's power cable. For use as a backup camera, wire the positive (+) lead to the positive power of your vehicle's reverse light and the negative (-) lead to the ground power of the reverse light. This will activate the camera automatically when reverse gear is engaged.
  4. For full-time rear view monitoring, wire the camera to a constant 12V-24V power source.
  5. Attach the antenna to the camera.
Wiring instructions for monitor power via car charger and camera power to reverse lights
Figure 3: Wiring diagram for monitor and camera power connections.
Wireless camera dimensions and comparison of view with and without distance guide lines
Figure 4: Camera dimensions and view without distance guide lines.

3. Wireless Connection

The monitor and camera are designed for automatic wireless pairing. Once both are powered on, the monitor should display the camera's feed. Ensure antennas are securely attached to both the monitor and camera for optimal signal.

Operating Instructions

Monitor Controls

The monitor can be controlled using the buttons on the front panel or the included remote controller.

Diagram of 7-inch LCD monitor controls and remote control functions
Figure 5: Monitor and remote control button descriptions.

Monitor Buttons:

  1. AV1/AV2 Push Button: Switches between video input channels.
  2. Select Channel: Used to select the wireless channel for the camera.
  3. Menu Button: Accesses the monitor's settings menu (brightness, color, contrast).
  4. Volume-: Decreases volume.
  5. Volume+: Increases volume.
  6. Power Standby: Puts the monitor into standby mode.
  7. Infrared Receiver: Receives signals from the remote controller.

Remote Controller Functions:

  1. POWER: Switches the power supply on/off.
  2. VIDEO: Selects between V1/V2 video inputs.
  3. VOL+: Increases volume.
  4. MENU: Adjusts brightness, colors, and contrast.
  5. MODE: Selects display results.
  6. VOL-: Reduces volume or selects channels.

Camera Features

  • Night Vision: Equipped with 18 IR LEDs for clear visibility in low-light conditions or complete darkness.
  • Waterproof: IP67 rating ensures the camera is protected against dust and water immersion, suitable for outdoor vehicle use.
  • No Distance Guide Line: This system provides a clear picture without superimposed distance guide lines, which some users prefer for an unobstructed view.

Maintenance

  • Cleaning: Use a soft, damp cloth to clean the monitor screen and camera lens. Avoid abrasive cleaners or solvents.
  • Connections: Periodically check all power and antenna connections to ensure they are secure and free from corrosion.
  • Camera Lens: Keep the camera lens clear of dirt, snow, or ice for optimal performance.

Troubleshooting

FAQ on Wireless Backup Camera

Q: There is no signal, how to get it worked?
A: 1. Please turn off FM radio, Bluetooth, Wi-Fi, or other electronic products to avoid signal interference.
2. Please press the 1st button on the monitor or press 'Video Select' on the remote to AV2, which works for the wireless camera.
3. Please switch the channel of the camera to 2370 by pressing the 2nd button on the monitor or pressing 'Model Select' on the remote.
4. For maximum signal, point the antennas towards each other.
5. Keep the monitor and camera about 2 meters' distance apart, or they may interfere with each other.
Q: The camera isn't lighted on, is it normal?
A: Kindly note that this camera is an IR camera with infrared sensors. The LED light will turn red when there is insufficient light or in the dark, indicating night vision is active.
Q: How can I get it to work full time as a security monitor?
A: If you want the camera on full time, please wire the camera to a constant power source (e.g., directly to the vehicle's battery with an appropriate fuse, not the reverse light circuit).

User Tips

  • For optimal wireless signal, ensure the antennas on both the monitor and camera are positioned vertically and are not obstructed by metal objects.
  • If you experience intermittent signal, try repositioning the antennas or ensuring there are no other strong wireless signals nearby causing interference.
  • The system is designed to provide a clear, unobstructed view without guiding lines, which can be beneficial for experienced drivers or specific vehicle types where precise distance markers are not preferred.

Warranty and Support

For any questions, technical assistance, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.