Motorcycle Fog Light Side Auxiliary LED Turn Signals Decorative Cowl Light

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of your new LED Fog Light Side Auxiliary Turn Signals. Designed specifically for the Honda Gold Wing GL1800 models from 2018 to 2022, these lights enhance visibility and upgrade your motorcycle's aesthetic with modern LED technology.

Figure 1: LED Fog Light Side Auxiliary Turn Signals installed on a Honda Gold Wing GL1800.

2. Specifications

3. Features

• Enhanced Visibility: Ultra bright LED lighting significantly improves front and side visibility for safer riding.
• Modern Design: Upgrades the aesthetic of your motorcycle with a sleek, contemporary LED look.
• Energy Efficient: Features ultra low power draw, minimizing strain on your motorcycle's electrical system.
• Durable Construction: Solid state design with no moving parts ensures longevity and reliability.
• Easy Installation: Designed for Plug N Play connectivity to your motorcycle's factory-style harness.
• Dual Lighting Functionality: Provides white light for Daytime Running Lights (DRL) and dynamic yellow flow-through turn signals.

Figure 2: White light effect for Daytime Running Lights.

Figure 3: Yellow flow-through light effect for turn signals.

4. Package Contents

Your package will contain the following items, depending on the option selected:

• 1 Pair of LED Fog Light Side Auxiliary Lights
• Optional: 1 Pair of Plug-n-Play 48000 Harness (required for turn signal function, if selected)

Figure 4: Detached LED Fog Light Side Auxiliary Lights.

Figure 5: Plug-n-Play 48000 Harness.

5. Installation

While these lights are designed for Plug N Play installation, professional installation is recommended to ensure proper function and safety. The manufacturer does not provide detailed installation instructions. Please contact customer service for further guidance if needed.

General Installation Steps:

1. Preparation: Ensure your motorcycle is turned off and cool. Disconnect the battery's negative terminal to prevent electrical shorts.
2. Access: Carefully remove any fairings or covers necessary to access the existing fog light or cowl area where the new lights will be installed.
3. Mounting: Secure the new LED Fog Light Side Auxiliary Lights in the designated locations on your Honda Gold Wing GL1800.
4. Wiring (DRL Function): Connect the lights using the provided Plug N Play connectors to the motorcycle's factory-style harness for the Daytime Running Light function.
5. Wiring (Turn Signal Function - Optional): If you wish to utilize the flow-through turn signal feature, connect the optional Plug-n-Play 48000 Harness to the appropriate factory-style turn signal harness. Ensure all connections are secure.
6. Testing: Reconnect the battery. Turn on the motorcycle's ignition and test both the white DRL function and the yellow turn signal function (if installed).
7. Reassembly: Once confirmed working, carefully reassemble any removed fairings or covers.

Figure 6: Close-up of installed LED Fog Light.

6. Operation

• Daytime Running Lights (DRL): The white LED lights will automatically activate when the motorcycle's ignition is turned on, providing continuous illumination for enhanced daytime visibility.
• Flow-through Turn Signals: When the motorcycle's turn signal is activated, the yellow LEDs will illuminate in a sequential, flowing pattern, clearly indicating your intended direction to other road users. This function requires the optional 48000 Harness to be correctly installed.

7. Maintenance

• Cleaning: To clean the lights, use a soft cloth dampened with mild soap and water. Avoid using abrasive cleaners, solvents, or high-pressure washers directly on the lights, as this may damage the plastic or LED components.
• Inspection: Periodically inspect the lights and their wiring connections for any signs of damage, corrosion, or looseness. Ensure all mounting points are secure.
• Damage: In case of any physical damage to the light housing or lens, or if the LEDs cease to function correctly, it is recommended to replace the unit to maintain optimal performance and safety.

8. Troubleshooting

Common Issues and Solutions:

• Lights Not Working:
  • Check all electrical connections to ensure they are firmly seated and not loose.
  • Verify that the motorcycle's ignition is on and that power is being supplied to the light circuit.
  • Inspect for any blown fuses in the motorcycle's electrical system related to the lighting circuit.
• Turn Signals Not Functioning or Not Flowing:
  • Ensure the optional 48000 Harness is correctly installed and connected to the motorcycle's turn signal wiring.
  • Check the motorcycle's existing turn signal system for proper operation.
• Lights Flickering:
  • Inspect all wiring and connections for any loose or intermittent contact.
  • Confirm that the motorcycle's electrical system is providing stable voltage.

If you encounter issues that cannot be resolved with these steps, it is advisable to consult a qualified motorcycle technician or contact customer service for assistance.

9. User Tips

No specific user tips were available from customer reviews or Q&A for this product at the time of manual creation.

10. Warranty and Support

Your product is covered by the seller's after-sales service. If you have any questions, concerns, or require assistance during the purchase process or after installation, please do not hesitate to contact customer service. The seller is committed to providing the best after-sales support to ensure your satisfaction.