1. Introduction
The HITBOX MINI ARC200D is a versatile 2-in-1 inverter welding machine designed for both MMA (Manual Metal Arc) and LIFT TIG (Tungsten Inert Gas) welding processes. This compact and lightweight unit features an intelligent LCD digital display for easy operation, showing welding parameters and current. It incorporates advanced synergy chip technology, automatic hot start, and adaptive arc force to ensure stable and efficient welding, making it suitable for both beginners and experienced users in DIY, maintenance, and repair applications.

Figure 1: HITBOX MINI ARC200D Welding Machine and included accessories.
2. Safety Instructions
Always prioritize safety when operating welding equipment. Failure to follow these guidelines can result in serious injury or death.
- Personal Protective Equipment (PPE): Always wear a welding helmet with appropriate shade, flame-resistant clothing, welding gloves, and safety shoes.
- Ventilation: Ensure adequate ventilation to remove welding fumes and gases from the work area.
- Fire Hazards: Keep flammable materials away from the welding area. Have a fire extinguisher readily available.
- Electrical Safety: Ensure the machine is properly grounded. Do not operate in wet conditions. Inspect cables and connections for damage before use.
- Eye and Skin Protection: Welding arc can cause severe burns to eyes and skin. Never look at the arc without proper eye protection.
- Children and Bystanders: Keep children and unauthorized persons away from the welding area.
3. Product Overview
3.1. Included Components
The standard package includes:
- 1 x ARC 200D MINI Welder
- 1 x Earth Clamp
- 1 x Electrode Holder
If you purchased the option with the TIG torch, it also includes:
- 1 x 17V Lift TIG Torch

Figure 2: Product content including the welding machine and accessories.
3.2. Control Panel Introduction
The front panel of the ARC200D MINI features an intelligent LCD digital display and control knob for easy adjustment and monitoring.

Figure 3: Control Panel Introduction.
- Welding Parameters: Displays selected welding mode and related settings.
- Current Display: Shows the current welding amperage.
- Other Functions: Indicates additional features or settings.
- Current Adjustment / Other Set Knobs: Used to adjust welding current and other parameters.
4. Setup
- Power Connection: Connect the welding machine to a 220V power supply using the provided EU plug. Ensure the power source can handle the machine's maximum input current (37A).
- Earth Clamp Connection: Securely attach the earth clamp to the workpiece or welding table. Ensure good electrical contact.
- Electrode Holder Connection (for MMA): Connect the electrode holder cable to the positive (+) terminal on the front panel. Insert the welding electrode into the holder.
- LIFT TIG Torch Connection (if applicable): Connect the LIFT TIG torch to the negative (-) terminal. Connect the gas hose from the TIG torch to a suitable inert gas cylinder (e.g., Argon) with a regulator.
- Power On: Turn on the main power switch on the welding machine. The LCD display will illuminate.
5. Operating Instructions
5.1. MMA (Stick) Welding
- Select MMA Mode: Use the control knob to select the MMA welding mode on the LCD display.
- Adjust Current: Rotate the control knob to set the desired welding current (amperage) based on the electrode size and material thickness. The machine supports electrode sizes from 1.0mm to 3.2mm and is suitable for electrodes like E7018 and E6013.
- Hot Start & Arc Force: The machine features automatic Hot Start for easy arc ignition and adaptive Arc Force to prevent the electrode from sticking, especially beneficial for beginners.
- Begin Welding: Position the electrode at the starting point of the weld. Strike the arc by lightly touching the electrode to the workpiece and quickly lifting it slightly. Maintain a consistent arc length and travel speed.

Figure 4: MMA welding in progress.
5.2. LIFT TIG Welding
(Requires optional 17V Lift TIG torch and inert gas supply)
- Select LIFT TIG Mode: Use the control knob to select the LIFT TIG welding mode.
- Gas Flow: Open the valve on your inert gas cylinder and adjust the flow rate on the regulator to the recommended setting for TIG welding.
- Adjust Current: Rotate the control knob to set the desired welding current.
- Initiate Arc: Gently touch the tungsten electrode to the workpiece and then lift it slightly to initiate the arc. The machine will automatically start the arc.
- Begin Welding: Maintain a short arc length and feed the filler rod into the weld puddle as needed.

Figure 5: The ARC200D MINI supports both MMA and LIFT TIG welding.
5.3. Welding Demonstration Video
Watch this video for a practical demonstration of the welding machine's capabilities, including MMA and LIFT TIG welding with various electrodes and settings.
Video 1: Demonstration of MMA welding with 2.5mm Superoptimal 6013 (0:16-0:23), 2.5mm ESAB EB 121 7018 (0:30-0:37), 3.2mm Jasenice EVB 50 (1:29-1:36), and 2.5mm Bohler Fox SAS 2 (2:10-2:17). Also shows LIFT TIG welding on 5.0mm sheet with 2.4mm GOLD tungsten (3:05-3:12).
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your welding machine.
- Cleaning: Periodically clean the machine's exterior with a dry cloth. Ensure ventilation openings are free from dust and debris. Use compressed air to blow out internal dust if necessary, ensuring the machine is unplugged.
- Cable Inspection: Regularly inspect all welding cables, electrode holder, and earth clamp for any signs of wear, cuts, or damage. Replace damaged components immediately.
- Connection Check: Ensure all electrical connections are tight and secure.
- Storage: Store the welding machine in a dry, clean, and well-ventilated area when not in use.
7. Troubleshooting
If you encounter issues with your HITBOX MINI ARC200D, refer to the following common problems and solutions:
- No Power/Machine Not Turning On: Check the power cable connection, wall outlet, and circuit breaker. Ensure the input voltage is 220V.
- Arc Ignition Difficulties (MMA): Ensure the electrode is dry and clean. Check the earth clamp connection for good contact. Adjust the welding current. The machine's Hot Start feature should assist with ignition.
- Electrode Sticking (MMA): Increase the Arc Force setting if available, or slightly increase the welding current. Ensure proper arc length and travel speed.
- Overheating: If the machine shuts down due to overheating, allow it to cool down. Ensure ventilation openings are clear. Reduce the duty cycle or welding current if continuously welding at high amperages.
- No Gas Flow (LIFT TIG): Check the gas cylinder level, regulator settings, and gas hose connections. Ensure the TIG torch valve is open.
- No Pulse Mode: This model, the ARC200D MINI, does not feature a pulse mode for either TIG or MMA welding.
8. Specifications
Technical specifications for the HITBOX MINI ARC200D welding machine:
| Parameter | Value |
|---|---|
| Model | ARC200D MINI |
| Voltage | 220V |
| No-load output voltage | 68V |
| Max. input power [kVA] | 6.2 |
| Max. input current [A]lmax | 37 |
| Rated Input current [A]leff | 28 |
| Power factor | 0.85 |
| Efficiency[%] | 90 |
| IP Protection class | IP21S |
| Welding current at min. duty cycle [A] | 200 |
| Conventional load voltage at min. duty cycle[V] | 28 |
| Cooling | AF |
| Burner cooling | No |
| Insulation class | H |
| Dimensions | 31 x 22 x 21 cm |
| Weight | 2.1 kg |
| Plug Type | EU Plug |
Figure 6: Technical Specifications.
9. User Tips
- Beginner-Friendly: This machine is especially suitable for beginners due to its intelligent features like automatic Hot Start and adaptive Arc Force, which simplify arc ignition and maintain a stable arc.
- Voltage Compatibility: The machine operates on 220V. If you are in a region with a 120V power supply (e.g., parts of Mexico or the US), you will need a suitable voltage converter to operate the machine safely and effectively.
- Circuit Protection: For optimal safety and performance, ensure your electrical circuit is adequately protected. A 16A fuse is generally recommended for this type of welder, but always consult local electrical codes and the capacity of your circuit.
- Synergy Technology: Leverage the advanced synergy chip technology. It automatically adjusts the arc start current based on metal thickness, reducing concerns about welding penetration or arc start failures.
10. Warranty and Support
The HITBOX MINI ARC200D welding machine comes with a 2-year warranty. For any technical assistance, troubleshooting beyond this manual, or warranty claims, please contact HITBOX customer support.