FEELWORLD F5 PROX 5.5 Inch 1600nit Touch Screen DSLR Camera Field Monitor User Manual

1. Introduction

1.1 Foreword

Thank you for purchasing our 5.5-inch high bright touch screen monitor. Please read this manual carefully before using the unit. Have a great experience!

1.2 Caution

• Please avoid heavy impact and dropping the product onto the ground.
• The screen is made of glass. Do not drop the screen towards the ground. Keep away from injury if the screen is broken.
• Keep the product away from heat sources and avoid prolonged exposure to the sun, as the LCD screen will be damaged.
• To avoid damaging the product, do not attempt to disassemble or repair the unit yourself without adjustable components.
• To better maintain the LCD screen and protect the cover, please follow these guidelines:
1. Refrain from using hard objects to hit the screen.
2. Do not force to wipe the screen.
3. Do not use chemical solutions to clean the screen.
4. Do not spray any detergent on the screen.
5. Do not write on the screen directly.
6. Do not stick anything on the screen.
7. Simply wipe with a clean soft cloth and ensure no water is on the screen.

2. Key Features

• Display: 5.5-inch 1920x1080 full HD IPS screen with 16.7M (8bit) color gamut for excellent detail and accurate color reproduction.
• Brightness: 1600nits high brightness, daylight viewable without a sun-hood.
• Control: Sensitive touch screen and intuitive button operation (F1-F3 custom shortcut keys).
• LUT Support: Supports 3D LUT Log to REC.709 and user 3D LUT upload (up to 32 custom .cube files via USB flash drive).
• External Kit: Sony F970 external install and power kit design for mounting and powering external equipment (wireless transmitter, LED light, video converter).
• Monitoring Tools: Built-in professional auxiliary tools including Waveform (RGB Parade, YUV Parade, Y Parade), Vector scope, RGB Histogram, Focus Assist (Peaking), Monochrome, Over Exposure (Zebras), False Color, Center Marker, Safe Frames, Grid, Scan Mode, Aspect Ratio, Image Flip, Image Freeze, Zoom Mode, P2P, and Check Field.
• Connectivity: 4K HDMI input and output (up to 4K@30Hz signal).
• Power Supply: Multiple power supply modes: DC IN 12V, Type-C 5V (from mobile phone charger or power bank, min 5V/2A), and NP-F battery slot (compatible with F970, F960, F950, F930, F770, F750, F730, F570, F550, F530 series).
• Output: Stereo Earphone output and DC 8.4V power out to power DSLR or mirrorless cameras.
• Mounting: 4 standard 1/4” mounting threads (top, bottom, right side, middle back) and included cold shoe mounted Tilt Arm for 360-degree rotation.
• Languages: Multi-language support (English, Simplified Chinese, Spanish, Portuguese, French, Dutch, German, Japanese, Traditional Chinese Style, Korean, Russian).

3. Product Description

3.1 Front Panel

The front panel features the 5.5-inch IPS touch screen and an indicator light. The indicator light is red when power is connected, turns yellow when the monitor is turned on, and green when an HDMI signal is connected.

3.2 Rear Panel

The rear panel includes the NP-F battery slot, battery lock, 1/4 screw hole, and the F970 External Power Kit mounting area.

3.3 Top Buttons

The top of the monitor features several buttons for control:

• F1, F2, F3: Custom function buttons.
• TOUCH: Toggles touch screen function ON/OFF.
• MENU: Displays OSD Main menu.
• V / ^: Decrease/Increase volume or backlight; Select menu items; Adjust parameter values.
• EXIT/U: Power On/Off button; Return/Exit Menu.

3.4 Bottom Ports

• DC OUT 8.4V: DC power output interface (barrel connector, polarity: center positive) for powering cameras with a separately available DC coupler.
• 3.5mm Earphone Port: Stereo headphone output.
• DC IN 5V (Type-C): Type-C power input. Recommended for local power supply only, not for loop-out power to other devices.

3.5 Left Ports

• HDMI IN: HDMI signal input, up to 4K@60Hz.
• HDMI OUT: HDMI signal output, up to 4K@60Hz.
• DC IN 12V: DC power input (barrel connector, polarity: center positive).

4. Setup

4.1 Power Supply

The monitor supports multiple power supply options:

• NP-F Battery Slot: Compatible with Sony NP-F series batteries (F970, F960, F950, F930, F770, F750, F730, F570, F550, F530). It is recommended to use standard original NP-F970 batteries. When using battery power, the two power output interfaces (DC OUT 8.4V and external install and power kit) can be connected to other devices. For powering other devices, a larger capacity battery is recommended for longer use time.
• DC IN 12V: The left side of the monitor has a DC 12V input power port (5.5mm outer, 2.1mm inner) and supports 7 ~ 24V wide voltage. A DC power adapter needs to be purchased separately. When using an external adapter, ensure it is at least a 3A power adapter if powering other equipment via the monitor's output.
• Type-C 5V: The bottom of the monitor has a Type-C 5V input power port. This port can be connected to a power bank for power supply and is not used for data transmission. It is recommended for local power supply only, not for loop-out power to other devices.

Remark: Please take off the battery from the monitor if you don't use the monitor for a long time.

4.2 Sony F970 External Install and Power Kit

A Sony F970 external install and power kit is integrated into the back of the monitor. This kit allows you to mount and power external equipment such as wireless transmitters, LED lights, and video converters using an NP-F battery.

The kit features two cross grooves, allowing you to adjust the position of the external device by loosening 2 screws (up/down, left/right) or install the kit upside down. If the kit is not needed, it can be removed by loosening the screws.

Removing the Kit:

1. Loosen the 2 screws.
2. Use both hands to move the kit up.
3. Move the round holes to align with the corresponding 2 screws.
4. Gently lift the kit upwards and carefully disassemble the 2P power cord.
5. Remove the 2 screws.

Note: Before disassembling the kit, ensure the monitor is turned off and remove the battery or power adapter.

Installing the Kit:

First, screw the 2 screws back into the screw holes on the back of the monitor. Install the 2P power cable to the cutout, then align the round hole of the kit with the screw, push the kit to the screw at the center of the kit cross, and then tighten the screws.

4.3 Mount Points

The monitor features 4 standard 1/4”-20 thread points (top, bottom, right side, and back center) for easy connection to hot shoe mounts, tripods, or other fixed installations.

Tilt Arm Mounting:

The included cold shoe mounted Tilt Arm allows the monitor to rotate 360 degrees for convenient viewing. It provides secure and lightweight mounting via a shoe mount or 1/4”-20 thread. The tilt arm also includes its own shoe mount for accessories like microphones, LED lights, or wireless receivers. Two small dots on the tilt arm align with the monitor for stable installation, allowing rotation without loosening screws.

4.4 Sunshade Installation

The portable sunshade helps resist strong light during outdoor shooting. It is easy to install:

1. First, lock the Sunshade Frame with the monitor.
2. Open the sunshade and match the sticker on the sunshade inside to the marked part of the sunshade frame.
3. Smooth and press 3 sides on the sunshade to complete the installation.

5. Operating Instructions

After the monitor is correctly connected to the power supply, the indicator light will be red. Long press the EXIT/U button to turn on the monitor (indicator turns yellow). After an HDMI signal is connected, the indicator turns green.

After turning on the power, you can press the TOUCH key to toggle the touch function ON/OFF.

5.1 Touch Screen Menu Operation (Default: Touch Screen On)

• Main Menu: Double-click on the screen to open the main menu (on the left side of the screen). Click on the corresponding menu to display the secondary menu. You can enter the function option and click directly to select or set. Click the touch screen to exit the menu.
• Shortcut Menu: When the menu is not displayed, swipe up from the bottom of the screen to open the shortcut menu. Click a function icon to open/exit the function. Swipe left/right to select more functions. Click outside the shortcut menu to exit.
• Quick Adjustments: On the left side of the screen (1/2 split screen), you can directly adjust the brightness of the screen backlight. On the right side of the screen (1/2 split screen), you can directly adjust the volume.

5.2 Button Menu Operation

• When the menu is not displayed, directly press the "V" or "^" button to adjust the volume or backlight. You can set the left and right buttons in the User Option menu.
• Press the “MENU” button to enter the OSD main menu. Press “MENU” again to enter the secondary menu. Use "V" or "^" to select items. After selection, press “MENU” to confirm and enter the function menu. Use "V" or "^" to select the corresponding function or adjust parameters.
• Press the EXIT/U button to return or exit the menu.

5.3 Menu Function Instruction

The monitor offers a wide range of professional functions accessible via the menu:

Assist Functions:

• All Waves: (On/Off) When on, waveform, vector, histogram, and embedded audio will be shown.
• Waveform: (On/Off) Modes: RGB, YUV, Y. Position X/Y (0-100) for horizontal/vertical movement. Waves Trans. (Off, 25%, 50%, 75%). Assists with exposure and checks lighting evenness.
• Vector: (On/Off) Position X/Y (0-100). Shows image saturation and pixel distribution on the color spectrum.
• Histogram: (On/Off) Modes: RGB1, RGB2, Y. Position X/Y (0-100). Displays color tone distribution, exposure status, and overlapping histograms (red, green, blue). Y Histogram checks picture brightness.
• Focus Assist (Peaking): (On/Off) Color (Red, Green, Blue). Peaking Level (1-10). Highlights in-focus areas to ensure sharp shots.
• Embedded Audio: (On/Off) Position X/Y (0-100). Audio Level Meters provide numerical indicators and headroom levels.
• Over Exposure (Zebras): (On/Off) Exposure Level (10-100). Fills overexposed areas with a striped pattern.
• Check Field: (On/Off) Mode (Red, Green, Blue, Mono). Quickly adjusts hue and saturation.
• False Colors: (On/Off) Mode (Normal, ARRI). Depicts objects in colors different from true color to aid exposure.

Marker Functions:

• Grid: (On/Off) Modes: 2x2, 3x3, 4x4, 5x5, 6x6, 7x7, 8x8, 9x9, Custom (Rows 2-9, Columns 2-9). Divides the picture into equal grids. Color (Red, Green, Blue, Black, White, Gray).
• Safe Frames: (On/Off) Modes: 80%, 85%, 90%, 93%, 96%, 2.35:1, 9:16. Color (Red, Green, Blue, Black, White, Gray).
• Center Marker: (On/Off) Color (Red, Green, Blue, Black, White, Gray).
• Ratio Marker: (On/Off) Mode: 4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1, 9:16. Color (Red, Green, Blue, Black, White, Gray). Modified Mark (0-5).

Image Functions:

• Scan Mode: Under Scan, Over Scan.
• Aspect Ratio: Auto, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1, Full Screen. Provides various aspect ratios to match anamorphic lenses.
• Anamorphic: (On/Off) Mode: 1.33X, 1.6X, 2.0X, 2.0X MAG, User (customizable 1.20X~2.00X). Allows viewing unsqueezed images from anamorphic lenses.
• Image Flip: (On/Off) Mode: H Flip, V Flip, H_V Flip.
• Zoom Mode: (On/Off) Mode: 2X, 4X, 9X, 16X, User (customizable 100%~200%). Amplifies any part of the HD signal for high-quality close-up.
• Image Freeze: (On/Off) Enables checking the image from a 1:1 signal source without scaling.
• P2P: (On/Off)

User Option Functions:

• LUT: (On/Off) After LUT Switch is on, use Lut (SLOG2, SLOG3, LOGC, VLOG). Lut Import: Confirm. Lut Table: Shows 4 built-in LUTs and up to 32 custom loaded LUTs.
• HDR: (On/Off) Mode: HLG1, HLG2, HLG3. Provides dynamic range and details for better visual effects.
• Display Adjustment: Backlight (0-100), Brightness (0-100), Contrast (0-100), Saturation (0-100), Tint (0-100).
• Color Adjustment: Display Range (Auto, Limit, Full), Color Temp. (5600K, 6500K, 9300K, User).

System Functions:

• User Switch: 1-4. Save and recall set menus.
• Language: Select from English, Simplified Chinese, Spanish, Portuguese, French, Dutch, German, Japanese, Traditional Chinese Style, Korean, Russian.
• OSD Option: OSD Time (Off, 15Sec, 30Sec, 45Sec), OSD Trans (Off, 25%, 50%, 75%).
• Volume: (On/Off) 0-100. Adjusts speaker volume.
• Power Settings: Power on (Auto, Manual). If Manual, press EXIT/U to turn on.
• Reset: Select Reset and press MENU button Confirm to restore factory settings.
• Firmware Update: Firmware Version, Firmware Update Confirm.

5.4 How to Load LUT

File Requirements:

• LUT file format suffix must be .cube.
• Single file size not to exceed 7.9Mb.
• Supports LUT-3D-Size 16, 17, 32, 33, 64, 65.
• LUT file names must be English or Arabic numerals.

Steps for Loading:

1. Ensure a USB flash drive is inserted into the standard accessory Type-C to USB adapter, then connect it to the monitor's Type-C interface.
2. Enter the main menu, navigate to LUT, then Lut Import, and click Confirm to load. The monitor will auto-detect the USB flash drive.

If valid LUT files are found, the monitor will load them and show "[n] name" (where [n] is the quantity number). If successful, the screen will show "complete[n]". The maximum number of LUT files is 32.

How to Clear Imported LUTs:

Insert an empty USB flash drive into the monitor, enter the main menu, navigate to LUT, then Lut Import, and click Confirm. The imported LUTs will be cleared.

6. Technical Specifications

7. Troubleshooting

7.1 Only black and white or monochrome picture:

1. Please check saturation, brightness & contrast adjustment in the menu.
2. Please check if "Check Field" is set to black, white, or monochrome image mode.

7.2 No Image after powering on:

1. Check if the signal cable connection is in good condition.
2. Check the signal cable connection again, and ensure you are using the standard adapter to connect the monitor. If power is supplied by battery, please check if the battery is fully charged.

7.3 Earphone No sound:

• Check if the Volume control is open, press the volume button, and try to increase the volume.
• If problems persist, please contact technical support.

As we are continuously improving product features and performance, specifications may change without prior notice.

8. User Tips

• Anamorphic Desqueeze: This monitor offers anamorphic desqueeze functionality, allowing you to view footage from anamorphic lenses correctly.
• Vertical Shooting: The monitor screen can be rotated for vertical (9:16) format shooting, providing flexibility for different content creation needs.
• Powering External Devices: When using the F970 external kit to power other devices, consider using a larger capacity NP-F battery to extend the overall run-time of your setup.
• Sunlight Visibility: The 1600nit high-bright screen is designed for clear visibility in direct sunlight, often eliminating the need for a sun-hood. However, the included sun-hood can further reduce reflections in extremely bright conditions.

9. Warranty and Support

The product warranty for FEELWORLD products is one year from the date of purchase.

We check the quality of goods before shipment. If unexpected problems occur, we aim to resolve them through friendly means:

1. If it is a quality problem, the buyer must provide photos, video, or other evidence for evaluation and identification.
2. For man-made damage, buyers are responsible.
3. For product quality issues, the buyer returns the goods (responsible for shipping costs). Upon receipt, we will send a new product and cover the resend shipping cost.

For further support or inquiries, please refer to the official FEELWORLD website or contact your retailer.

You can also refer to the User Manual (PDF) for additional details.

10. Product Video Overview