1. Introduction
The Parkside X20V Tool Wall Mount Holder is designed to provide a convenient and organized storage solution for your Parkside X20V series electric tools. This durable plastic bracket allows for easy wall or chassis mounting, helping to keep your workspace tidy and your tools readily accessible.
2. Package Contents
Please check the package for the following items:
- 3 x Parkside X20V Tool Wall Mount Holders (Red)
- Screws for mounting (typically 3 per holder, quantity may vary)
3. Specifications
| Feature | Detail |
|---|---|
| Material | Hard Plastic |
| Color | Red |
| Mounting | Wall/Chassis mount with 3 countersunk screw holes |
| Compatibility | Parkside X20V Team series power tools |
4. Compatibility
These tool holders are compatible with various Parkside X20V Team series power tools, including but not limited to:
- Parkside X20V Team 20V Handheld Drill
- Parkside X20V Team 20V Handheld Hammer
- Parkside X20V Team 20V Handheld Saw
- Parkside X20V Team 20V Rotary Hook
- Parkside X20V Team 20V Electric Grinder
- Parkside X20V Team 20V Electric Screwdriver
- Parkside X20V Team 20V Grinding Wheel
- Parkside X20V Team 20V Hot Glue Gun
- Parkside X20V Team 20V Car Washer
- Parkside X20V Team 20V Lawn Trimmer
- Parkside X20V Team 20V Fan
5. Setup (Installation)
The tool holders can be installed on walls, under shelves, or any suitable sturdy surface. Each holder features three countersunk screw holes for secure attachment.
Installation Steps:
- Choose Location: Select a suitable location for mounting the tool holder. Ensure the surface is sturdy enough to support the weight of your tools.
- Mark Holes: Mark the positions for the three screw holes on your chosen mounting surface.
- Drill Pilot Holes (Optional): If necessary, drill pilot holes appropriate for your mounting surface and the type of screws provided.
- Secure Holder: Secure the tool holder using the provided countersunk screws. It is crucial to ensure the screws are completely located within the counterbore to prevent any interference with tool installation.
- Avoid Overtightening: Exercise caution and avoid overtightening the screws, as this can lead to plastic breakage.
6. Operating (Usage)
Using the Parkside X20V Tool Holder is straightforward:
- To Insert a Tool: Align your compatible Parkside X20V tool with the bracket and slide it downwards into the holder until it clicks or locks securely in place.
- To Remove a Tool: Grasp the tool firmly and pull it upwards or outwards from the bracket.
7. Maintenance
To ensure the longevity and proper function of your tool holders:
- Cleaning: Clean the tool holders periodically with a damp cloth to remove dust and debris.
- Avoid Harsh Chemicals: Do not use harsh chemicals or abrasive cleaners, as these may damage the plastic material.
- Inspection: Regularly inspect the holders for any signs of wear, cracks, or damage. Replace any damaged holders to ensure secure tool storage and prevent accidents.
8. Troubleshooting
- Tool does not fit securely:
- Ensure the tool is a compatible Parkside X20V series model.
- Check for any obstructions or debris within the holder or on the tool's base.
- Holder feels loose after installation:
- Verify that the mounting screws are fully seated in the counterbores and tightened appropriately.
- Ensure the mounting surface is solid and provides adequate support.
- Plastic breakage:
- This can occur from overtightening screws during installation or applying excessive force during tool insertion/removal. Ensure proper installation and gentle handling.
- If a holder is broken, replace it immediately to prevent tools from falling.
9. User Tips
No specific user tips are available at this time. Please refer to the general instructions for optimal use and safety.
10. Warranty and Support
For warranty information, technical support, or any product-related inquiries, please contact the seller directly or refer to the product's original packaging for contact details.
