Douk Audio M5.1

Contents

Douk Audio M5.1 5.1 Channel Digital Amplifier

HiFi Bluetooth 5.0 Receiver USB/COAX/OPT Home Theater Power Amplifier with Subwoofer LDAC

1. Introduction

The Douk Audio M5.1 is a versatile 5.1 channel digital amplifier designed to enhance your home theater audio experience. Featuring Bluetooth 5.0, multiple digital and analog inputs, and powerful output, it allows for flexible system configurations from 2.0 to 5.2 channels. Its built-in multi-channel signal processing chip and algorithms provide excellent noise reduction and precise sound positioning, even simulating 5.1 channel output from 2.0 channel input.

2. Safety Information

  • Ensure the amplifier is placed on a stable, level surface with adequate ventilation.
  • Do not expose the unit to water, moisture, or extreme temperatures.
  • Use only the provided power adapter or a compatible DC 15-24V power supply.
  • Avoid blocking ventilation openings to prevent overheating.
  • Do not attempt to open or service the unit yourself. Refer all servicing to qualified personnel.
  • Keep out of reach of children.

3. Package Contents

Please check the package for the following items:

  • 1x M5.1 Amplifier
  • 1x 24V/6A Power Adapter (Default, one included. For higher output, an additional adapter may be required.)
  • 1x Optical Cable
  • 1x Bluetooth Antenna
  • 1x User Manual
Package contents of Douk Audio M5.1 amplifier
Figure 3.1: M5.1 Amplifier and included accessories.

4. Product Overview

4.1 Front Panel Controls

Front panel controls of Douk Audio M5.1 amplifier
Figure 4.1: Front Panel Layout and Functions
  • MODE Button: Short press to switch input channels (USB/BT, Optical, Coaxial, 2.0 RCA, 5.1 RCA). Long press to turn off/on.
  • Previous Song Button: For U-disk / Bluetooth input.
  • Play/Pause Button: Short press for pause/play. Long press to switch between 2.1 and 5.1 output modes.
  • Next Song Button: For U-disk / Bluetooth input.
  • SUBWOOFER Knob: Adjusts subwoofer volume.
  • CENTER Knob: Adjusts center channel volume.
  • SURROUND Knob: Adjusts surround channel volume.
  • FRONT Knob: Adjusts front channel volume.
  • VOLUME Knob: Main volume control.
  • BASS Knob: Adjusts bass level.
  • TREBLE Knob: Adjusts treble level.
  • U-disk Input: USB port for U-disk playback.

4.2 Rear Panel Connections

Rear panel connections of Douk Audio M5.1 amplifier
Figure 4.2: Rear Panel Input and Output Ports
  • RF Antenna: For Bluetooth connection.
  • COAX IN: Coaxial digital audio input.
  • OPT IN: Optical digital audio input.
  • SUB OUT: RCA output for active subwoofer.
  • 2.0 CH IN (RCA): Stereo RCA input.
  • 5.1 CH IN (RCA): Multi-channel RCA input for 5.1 source.
  • DC 15-24V IN (MAIN/VICE): Dual power supply inputs.
  • 5.1 CHANNEL SPEAKER OUTPUT: Banana speaker jacks for Front (FL/FR), Surround (SL/SR), Center (CEN), and Subwoofer (SUB) passive speakers.

5. Setup Instructions

5.1 Connecting Speakers

  1. Connect your passive speakers to the corresponding banana speaker jacks on the rear panel (FL, FR, SL, SR, CEN, SUB). Ensure correct polarity (+ to + and - to -).
  2. If using an active subwoofer, connect its RCA input to the 'SUB OUT' port on the amplifier.

5.2 Connecting Audio Sources

The M5.1 amplifier supports various audio inputs:

  • Bluetooth: Screw the provided Bluetooth antenna into the RF port. Enable Bluetooth on your device and pair with 'Nobsound M5.1'.
  • Optical/Coaxial: Connect your source (e.g., TV, CD/DVD player) to the 'OPT IN' or 'COAX IN' port using an optical or coaxial cable.
  • U-disk: Insert a USB flash drive (formatted as FAT32) containing MP3/WAV/APE/FLAC audio files into the 'U-disk Input' port on the front panel.
  • 2.0 Channel RCA: Connect stereo RCA cables from your source to the '2.0 CH IN' ports.
  • 5.1 Channel RCA: For true 5.1 channel audio, connect your 5.1 source (e.g., DVD player with 5.1 analog outputs) to the '5.1 CH IN' ports.
Diagram showing various input devices connected to the amplifier
Figure 5.1: Connecting various audio sources to the M5.1 amplifier.
Diagram illustrating 2.0 channel input being processed to 5.1 channel output
Figure 5.2: Example of 2.0 channel input simulation to 5.1 channel output.

5.3 Power Connection

  1. Connect the provided 24V/6A power adapter to one of the 'DC 15-24V IN' ports on the rear panel.
  2. For higher power output, you may connect a second compatible DC 15-24V power adapter to the other power input port.
  3. Plug the power adapter(s) into a suitable wall outlet.
Image showing the amplifier with two power adapters connected
Figure 5.3: Dual power input for enhanced performance.

6. Operating Instructions

6.1 Power On/Off

Long press the 'MODE' button on the front panel to turn the amplifier on or off.

6.2 Input Selection

Short press the 'MODE' button to cycle through the available audio inputs: Bluetooth, Optical, Coaxial, U-disk, 2.0 Channel RCA, and 5.1 Channel RCA. The corresponding indicator light will illuminate.

6.3 Volume and Tone Control

  • Use the large 'VOLUME' knob to adjust the overall master volume.
  • Adjust individual channel volumes using the 'SUBWOOFER', 'CENTER', 'SURROUND', and 'FRONT' knobs.
  • Fine-tune the sound profile with the 'BASS' and 'TREBLE' knobs.

6.4 Output Mode Switching (2.1 / 5.1)

Long press the 'Play/Pause' button to switch between 2.1 channel and 5.1 channel output modes. When 5.1 channel output mode is selected, any input (even 2.0 channel) will be processed and simulated to 5.1 channel output.

6.5 U-disk Playback

When 'U-disk' input is selected, use the 'Previous Song' and 'Next Song' buttons to navigate tracks. The 'Play/Pause' button controls playback.

7. Specifications

FeatureSpecification
BrandNobsound (Douk Audio)
ModelM5.1
Audio InputBluetooth 5.0 / Coaxial / Optical / U-disk / 2.0 Channel RCA / 5.1 Channel RCA
Audio OutputBanana speaker jacks / Low frequency out (for active subwoofer)
Maximum Output Power (per channel)Front: 50W+50W, Surround: 50W+50W, Center: 50W, Bass: 50W
Supported U-disk FormatsMP3/WAV/APE/FLAC
Sampling Rate (U-disk)16Bit / 44.1-48KHz
Sampling Rate (Bluetooth)16Bit / 44.1-48KHz
Sampling Rate (Coaxial/Optical)16-24Bit / 44.1-192KHz
Frequency Response20Hz-20KHz (+1.5dB)
Bass Frequency Response40Hz-160Hz
Input Sensitivity0.775V
SNR≥100dB
THD0.05% @1kHz
Treble/Bass Range±6dB
Working VoltageDC 15-24V
Dimensions (W*D*H)230*130*49mm / 9.06*5.12*1.93in
Net Weight1.19kg / 2.62lb

8. Troubleshooting

  • No audio output from digital inputs (USB/COAXIAL/OPTICAL): Ensure your source device is sending a PCM stereo signal. The amplifier's digital inputs only support PCM stereo. Other formats may result in no sound.
  • Not getting 'true' 5.1 channel sound: For genuine 5.1 channel output, connect a 5.1 channel audio source directly to the '5.1 CH IN' RCA ports. If you input a 2.0 channel signal and switch to 5.1 output mode, the amplifier will simulate 5.1 surround sound using its internal processing.
  • Low power output: The amplifier comes with one 24V/6A power adapter. If you require higher output, consider connecting a second compatible DC 15-24V power adapter to the additional power input port.

9. User Tips

  • Channel Configuration: The M5.1 amplifier supports 6 channels, which includes a full 5.1 channel setup. This allows for a comprehensive surround sound experience.
  • Power Output: Each channel provides a maximum power of 50W, offering ample volume for most home audio setups.
  • Upmixing Feature: The amplifier has an upmixing feature that can process a 2.0 channel stereo input and simulate it into a 5.1 channel output, providing a surround sound experience even from stereo sources.

10. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the exterior of the amplifier. Do not use liquid cleaners or aerosols.
  • Ventilation: Ensure the ventilation openings are clear of dust and debris to maintain proper airflow and prevent overheating.
  • Storage: If storing the unit for an extended period, disconnect it from power and store it in a cool, dry place.

11. Warranty and Support

For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.