staniot SecCube 3 H320-WiFi

Contents

Staniot SecCube 3 WiFi Alarm System User Manual

Your guide to smart home security and protection.

1. Introduction

The Staniot SecCube 3 WiFi Alarm System is a smart home security solution designed for comprehensive protection. This system features a minimalist design with powerful functionalities, including RFID quick arm/disarm, APP remote control, and compatibility with popular voice assistants like Alexa and Google Assistant. This manual provides detailed instructions for setting up, operating, and maintaining your SecCube 3 alarm system.

Staniot SecCube 3 WiFi Alarm System Kit with various sensors and remote controls
Figure 1: Staniot SecCube 3 WiFi Alarm System Kit components.

2. Product Overview

The SecCube 3 alarm system is designed for ease of use and integration into your smart home. Its compact, cube-shaped design houses essential security features.

Diagram of Staniot SecCube 3 showing security light, security button, RFID sensing area, WiFi status indicator, speaker/siren, power switch, USB Type-C, and WiFi pairing button.
Figure 2: Front and rear view of the SecCube 3 main unit with labeled components.

Main Components:

  • Security Light: Indicates system status.
  • Security Button: Used for arming/disarming and triggering/silencing alarms.
  • RFID Sensing Area: For quick arming/disarming with RFID cards/tags.
  • WiFi Status Indicator: Shows WiFi connection status.
  • Speaker/Siren: Emits alarm sounds and doorbell melodies.
  • Power Switch: Turns the device on/off.
  • USB Type-C Port: For power input (DC5V 1.0A).
  • WiFi Pairing Button: For connecting to your WiFi network.

3. Package Contents

The specific contents of your kit may vary based on the purchased set (e.g., Set-A, Set-B, etc.). A typical kit includes:

  • SecCube 3 Alarm Panel (Main Unit)
  • RFID Tags (quantity varies by kit)
  • Remote Controllers (quantity varies by kit)
  • Door/Window Sensors (quantity varies by kit)
  • Motion Detectors (quantity varies by kit)
  • Power Adapter (USB Type-C)
  • User Manual (this document)
Image showing the main alarm panel unit and two RFID tags.
Figure 3: Example of a basic kit including the alarm panel and RFID tags.

4. Setup Instructions

4.1 Initial Power-Up

  1. Connect the SecCube 3 main unit to a power source using the provided USB Type-C cable and power adapter.
  2. Flip the Power Switch to the ON position.
  3. The WiFi status indicator will light up, indicating the device is powered on.

4.2 App Connection (Tuya Smart Life)

  1. Download the "Tuya Smart" or "Smart Life" app from your smartphone's app store.
  2. Register or log in to your account.
  3. In the app, tap "+" to add a new device.
  4. Follow the in-app instructions to connect your SecCube 3 to your home WiFi network (2.4GHz only). You may need to press the WiFi pairing button on the device to enter pairing mode.

4.3 Pairing Accessories

The SecCube 3 supports up to 96 accessories, including door/window sensors, motion detectors, wireless sirens, and more, using 433MHz, EV1527 sensor type.

  1. In the Tuya Smart/Smart Life app, navigate to the SecCube 3 device settings.
  2. Select the option to add accessories or sensors.
  3. Follow the app's prompts to put the accessory into pairing mode (usually by triggering it or pressing a button on the accessory).
  4. Once paired, you can rename accessories within the app for easier identification.
Diagram showing the SecCube 3 in the center surrounded by various compatible accessories like vibration sensors, water leakage detectors, rolling shutter door sensors, wireless keypads, motion detectors, smoke detectors, signal extenders, and video doorbells.
Figure 4: SecCube 3 supports a wide range of 433MHz, EV1527 accessories.

4.4 RFID Card Setup

The system supports up to 10 RFID cards (125KHz, 4100/4200 protocol) for quick arming/disarming.

  1. In the app, go to the RFID card management section for your SecCube 3.
  2. Select "Add RFID Card" and follow the instructions to register your RFID tags by touching them to the RFID sensing area on the main unit.

5. Operating Instructions

5.1 Arming and Disarming the System

Using the Security Button:

  • Away Arm: When the system is disarmed, short-press the security button once to activate "Away" mode.
  • Home Arm: Short-press the security button again to enter "Home" mode.
  • Trigger/Silence Alarm: Long-press the security button for 2 seconds to trigger the alarm or silence an active alarm. This function can be enabled/disabled in the app.
Image showing how to use the multi-function security button on the SecCube 3 for Away/Home arming and long press for System Alarm/Alarm Silence.
Figure 5: Multi-function Security Button operation.

Using RFID Cards/Tags:

  • Simply touch a registered RFID card or tag to the RFID sensing area on the SecCube 3 to quickly arm or disarm the system.
Image demonstrating quick arming and disarming using an RFID card on the SecCube 3. Shows 'First Touch Away Arm' and 'Second Touch Disarm'.
Figure 6: RFID Card Quick Arm/Disarm System.

Using Remote Control:

  • Use the provided remote controller to arm, disarm, or trigger the SOS alarm. Refer to the remote control's specific buttons for each function.
Video 1: Basic Settings and Remote Control Operation.

Using the Mobile App:

  • Open the Tuya Smart/Smart Life app to remotely arm, disarm, or monitor your system from anywhere. The app also provides instant notifications for security events.
Smartphone screen showing an instant app notification for a security event from the Smart Security Box.
Figure 7: Instant APP Notification and Remote Control.

Voice Control (Alexa & Google Assistant):

  • Integrate your SecCube 3 with Amazon Alexa or Google Assistant through the Tuya Smart/Smart Life app. Once linked, you can use voice commands to arm or disarm your system.
  • Note: A PIN code is required when disarming the device via voice command. This PIN is set within the Alexa or Google Home app.
A family in a living room with the SecCube 3, showing 'works with Alexa' and 'works with Google Assistant' logos, and a speech bubble saying 'Alexa, Please arm my home.'
Figure 8: Voice control with Alexa and Google Assistant.

5.2 Door/Window Detection

When paired with entry sensors:

  • System Armed: If a door/window is opened, the system will sound an alarm.
  • System Disarmed: If a door/window is opened, the system will emit a chime sound.
  • Arming Notification: If a door/window is left open when attempting to arm the system, the app will send a notification.
Image depicting a door/window sensor on an open door, with the SecCube 3 in the foreground, illustrating system disarm chime and app notification for arming.
Figure 9: Door/Window Detection functionality.

5.3 Doorbell Function

When paired with a compatible doorbell button, the SecCube 3 can function as a doorbell chime. There are 18 selectable melodies available.

Image showing the SecCube 3 acting as a doorbell chime with musical notes, and a hand pressing a doorbell button.
Figure 10: 18 Doorbell Melodies feature.

6. Maintenance

6.1 Battery Management

The SecCube 3 features a built-in 1000mAh lithium battery, providing over 12 hours of standby time during power outages or emergencies. Ensure the device is regularly connected to power for optimal performance.

Image illustrating the built-in 1000mAh battery of the SecCube 3, emphasizing low power consumption and over 12 hours standby time.
Figure 11: Built-in 1000mAh Battery for emergency backup.

6.2 OTA Online Upgrade

The system supports Over-The-Air (OTA) online upgrades, allowing for continuous improvements and new features without extra fees or contracts. The app will notify you when a new firmware update is available.

Smartphone screen showing a notification for a new device firmware update available for the Smart Security Box.
Figure 12: OTA Online Upgrade notification.

7. Troubleshooting

ProblemPossible CauseSolution
Device not powering onPower cable not connected, power adapter faulty, power switch off.Ensure USB Type-C cable is securely connected. Check power adapter. Verify power switch is ON.
Unable to connect to WiFiIncorrect WiFi password, 5GHz network, device too far from router, pairing mode not activated.Ensure correct 2.4GHz WiFi network and password. Move device closer to router. Press WiFi pairing button to activate pairing mode.
Accessories not pairingAccessory not in pairing mode, incorrect sensor type.Ensure accessory is in pairing mode as per its manual. Verify accessory is 433MHz, EV1527 compatible.
Alarm not soundingVolume too low, siren disabled in app, device disarmed.Check volume settings in app. Ensure siren is enabled. Verify system is armed.

For further troubleshooting, refer to the Tuya Smart/Smart Life app's help section or the manufacturer's official support channels.

8. Specifications

FeatureDetail
Model NumberSecCube 3 H320-WiFi
Power SupplyDC5V 1.0A USB Type-C
Built-in Battery3.7V 1000mAh lithium battery
Working Power Consumption< 1W
Working Temperature-10°C ~ +50°C
Relative Humidity< 95% (no condensation)
Wireless Parameters433MHz, EV1527
WiFi StandardIEEE802.11b/g/n 2.4GHz
Product Size80x80x80mm
Zone Number96
Output Number96
Kit ConfigurationDoor/Window Sensor (base kit)
Arming TypeRFID Card
Communication InterfaceWireless
Video InterfaceYes
DisplayYes
Password KeyboardYes
Smart Home PlatformTuya
CertificationCE, RoHS
Alarm TypeThe Alarm, Apps Control
Table of product parameters including Power Supply, Built-in Battery, Working Power Consumption, Working Temperature, Relative Humidity, Wireless Parameters, WiFi Standard, and Product Size.
Figure 13: Detailed Product Parameters.
Diagram showing the dimensions of the SecCube 3 as 80mm x 80mm x 80mm.
Figure 14: Product Dimensions.

9. User Tips

  • Disabling the Green Status Light: If the constantly lit green status light is a concern, you can enable "Security Light Standby Mode" in the app. This will turn off the indicator light when there is no operation, reducing power consumption and visual distraction.
  • Ease of Use for All: The combination of APP control, remote control, and RFID tags makes the system accessible for all family members, including the elderly and children, who may not always have a smartphone.
Image showing a family in a living room, with the SecCube 3 and a remote control and RFID tag, highlighting the user-friendly design for all ages.
Figure 15: User-Friendly Design for all family members.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the manufacturer or your retailer. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.