1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your LICHIFIT RC 36X Rubber Tires and Plastic Wheels. These high-quality accessories are designed for 1:10 On-Road Racing RC Cars, offering enhanced performance and authenticity.
Key Features:
- Tire lining features a special process with added wear-resistant fabric for durability.
- High detailed simulation, derived from real car design, enhancing the authenticity of your RC car.
- Designed for easy installation, suitable for both beginners and experienced RC car enthusiasts.
- Excellent spare parts for upgrading and modifying your RC vehicles.
- Professional-grade quality for reliable performance.
2. Package Contents
Please verify that all items are present and in good condition upon opening the package:
- 4 x RC 36X Rubber Tires with Plastic Wheels
Note: The RC car model is not included in this package.
3. Specifications
| Attribute | Value |
|---|---|
| Material | Rubber (Tires) + Plastic (Wheels) |
| Hardness | 36 |
| Applicable Model | 1:10 On-Road Racing RC Car |
| Quantity | 4 Pcs |
| Outer Diameter (Tire) | 65mm |
| Inner Diameter (Wheel Rim) | 51mm |
| Width (Tire) | 26mm |
| Weight (per tire) | 38g |
| Tire Insert Diameter | 60mm |
| Tire Insert Width | 21mm |
| Tire Insert Weight | 8g |
Figure 1: Tire Dimensions and Weight
Figure 2: Tire Insert Details and Dimensions
4. Setup and Installation
Installing your new RC tires is a straightforward process. Follow these steps to ensure proper fitment and performance:
- Prepare Your RC Car: Ensure your RC car is powered off and stable. If replacing existing tires, carefully remove the old wheels from the axles.
- Inspect New Tires: Examine each new tire and wheel assembly for any manufacturing defects or damage.
- Mounting: Align the wheel's hex hub with the hex on your RC car's axle. Push the wheel firmly onto the axle until it seats properly. Secure it with the appropriate wheel nut or pin, ensuring it is tight but not overtightened to avoid damaging the wheel bearing or hex.
- Check for Free Rotation: After installation, manually spin each wheel to ensure it rotates freely without any binding or rubbing against other components.
- Tire Gluing (if applicable): Some RC tires require gluing to the wheel rim for optimal performance, especially in racing conditions. Check if your tires are pre-glued. If not, and you desire maximum performance, apply a suitable RC tire glue (not included) to the bead of the tire where it meets the wheel rim. Allow sufficient drying time before use.
Figure 3: RC Car with LICHIFIT Tires
Figure 4: Tire, Wheel, and Insert Components
5. Operating
Once installed, these LICHIFIT RC 36X Rubber Tires are ready for use on your 1:10 On-Road Racing RC Car. They are designed to provide optimal grip and handling characteristics for on-road surfaces. Always operate your RC car responsibly and in appropriate environments.
6. Maintenance
Proper maintenance will extend the lifespan and performance of your RC tires:
- Cleaning: After each use, especially on dusty or dirty tracks, clean the tires to remove debris. A soft brush and mild soap with water can be used. Ensure tires are completely dry before storage.
- Inspection: Regularly inspect tires for signs of wear, cuts, cracks, or punctures. Check the wheel rims for damage or bends.
- Storage: Store tires in a cool, dry place away from direct sunlight and extreme temperatures. Avoid storing them under heavy objects that could deform their shape.
- Tire Rotation: For even wear, consider rotating your tires periodically (e.g., front to rear, or left to right, depending on your car's setup and wear patterns).
7. Troubleshooting
Here are some common issues and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Poor Grip/Handling | Worn tires, incorrect tire compound for surface, loose wheel nuts, unglued tires. | Replace worn tires. Ensure tires are appropriate for the track surface. Tighten wheel nuts. Glue tires to rims if not already done. |
| Uneven Tire Wear | Incorrect suspension setup (camber, toe), unbalanced wheels, aggressive driving style. | Adjust suspension settings. Check wheel balance. Modify driving style. Rotate tires. |
| Tire Separating from Wheel | Tires not glued, glue failed, impact damage. | Re-glue the tire to the wheel rim using appropriate RC tire glue. Replace if damaged beyond repair. |
| Wheel Wobble | Bent axle, damaged wheel, loose wheel nut. | Inspect and replace bent axles. Replace damaged wheels. Tighten wheel nuts. |
8. User Tips
- Gluing for Performance: While some tires may fit snugly, for competitive racing or aggressive driving, it is highly recommended to glue the tires to the wheel rims. This prevents the tire from coming off the rim during high-speed turns or impacts, ensuring consistent performance.
- Tire Inserts: The included tire inserts (foam) are crucial for maintaining tire shape and providing consistent feel. Ensure they are properly seated inside the tire before mounting to the wheel.
- Break-in Period: New tires may require a short break-in period to achieve optimal grip. Drive your RC car gently for the first few minutes to scuff the tire surface.
9. Warranty and Support
For any questions, concerns, or support regarding your LICHIFIT RC 36X Rubber Tires & Plastic Wheels, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.
10. Safety Information
⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Always handle RC car parts with care. Keep small parts away from children. This product is intended for use with remote control vehicles and is not a toy.