konsenda 300MK01

Contents

300M HDMI KVM IP Extender User Manual

Model: 300MK01 | Brand: konsenda

1. Introduction

The 300M HDMI IP Extender is based on TCP/IP standard. It transmits your HD display with high resolution up to 300 meters away from your DVD or computer source by using one CAT5e/6 cable. It supports HDMI audio and video source transmission in point-to-point, point-to-multipoint, multipoint-to-multipoint, and cascade connection modes.

2. Features

  • Supports HDCP1.4.
  • Decoding Mode: MJPEG.
  • Supports point-to-point, point-to-multipoint, multipoint-to-multipoint, and cascade connection modes.
  • Complies with 802.3 Ethernet standard.
  • Supports IR remote control.
  • Supports USB mouse and keyboard extension (KVM functionality).
  • Pure hardware design, plug and play, no additional software required.

3. Specifications

ParameterValue
Resolutions480P/720P/1080P
Audio Sample Rate32kHz, 44.1kHz, and 48kHz
Power Adapter FormatInput AC (50HZ, 60HZ) 100V-240V; Output: DC5V/1A
Max Working CurrentTX 450mA, RX 450mA
Size (L-W-H)90*91*19mm
Weight121g x 2 (for Transmitter and Receiver)
Operating Temperature/Humidity0℃-45℃ / 10%-80%RH (no condensation)
Storage Temperature/Humidity-10℃-70℃ / 5%-90%RH (no condensation)

4. Package Contents

The standard package includes:

  • 1 x Transmitter (TX)
  • 1 x Receiver (RX)
  • 1 x USB Cable (Male to Male)
  • 2 x 5V Power Adapters
  • 1 x User's Manual
  • 1 x IR Transmitter
  • 1 x Narrowband Infrared Receiver

Note: At least one Transmitter (TX) and one Receiver (RX) unit are required for operation. Separate RX units can be purchased for multi-point setups.

5. Physical Interface Diagram

Below are the diagrams illustrating the ports on the Transmitter (TX) and Receiver (RX) units.

Physical interface diagram of the HDMI KVM IP Extender Transmitter and Receiver units, showing all ports and indicators.
Physical interface diagram of the HDMI KVM IP Extender Transmitter and Receiver units.

Transmitter (TX) Ports:

  • DC/5V: Power adapter port.
  • PWN: Power indicator.
  • Status: Status indicator.
  • Link: Network connection indicator.
  • Reset: Restart key (short press to restart, long press to restore factory settings).
  • IR-TX: Connect IR transmitter.
  • HDMI In: Connect HDMI signal source.
  • SET: DIP switch setting.
  • Ethernet: Network interface for CAT5e/6 cable.
  • USB-PC: USB output, connect to computer.

Receiver (RX) Ports:

  • DC/5V: Power adapter port.
  • PWN: Power indicator.
  • Status: Status indicator.
  • Link: Network connection indicator.
  • Reset: Restart key (short press to restart, long press to restore factory settings).
  • IR-RX: Connect IR receiver.
  • HDMI Out: HDMI output, connect to HDMI display device.
  • SET: DIP switch setting.
  • Ethernet: Network interface for CAT5e/6 cable.
  • Keyboard: USB input, connect keyboard.
  • Mouse: USB input, connect mouse.

6. Setup and Connection

  1. Connect HDMI Source: Connect your HDMI source (e.g., DVD, PS3, STB) to the "HDMI IN" port of the Transmitter (TX) using an HDMI cable.
  2. Connect HDMI Display: Connect the "HDMI Out" port of the Receiver (RX) to your display device (e.g., TV, monitor, projector) using an HDMI cable.
  3. Connect TX and RX: Connect the Transmitter and Receiver units using one CAT5e/6 cable. A qualified CAT6 T-568B cable with a copper conductor is recommended. The maximum transmission distance is 300 meters. Ensure the cable length is not less than 5 meters.
  4. IR Control (Optional): If you need IR remote control functionality, plug the IR receiver into the RX unit and the IR transmitter into the TX unit. Aim the IR transmitter at the equipment you wish to control.
  5. KVM Control (Optional): For KVM functionality, plug your USB mouse and keyboard into the respective USB ports on the RX unit. Then, connect the "USB-PC" port on the TX unit to your computer using the provided USB cable.
  6. Power On: Connect the two 5V power adapters to the DC/5V ports on both the Transmitter and Receiver units. Power on the devices. The PWN indicator should light up. When the status indicator twinkles and the link indicator lights up, it means the units have started successfully.

7. Operation and Configuration

DIP Switch Settings

The DIP switches (SW1, SW2, SW3, SW4) on both the TX and RX units are used for configuration. "ON" corresponds to level 0 (dial down), and "OFF" corresponds to level 1.

  • SW1: Controls the connection mode.
    • Point-to-Multi-point: Set SW1 to "OFF".
    • Multi-point-to-Multi-point: Set SW1 to "ON".
  • SW2, SW3, SW4: Control IP address settings.
    • TX Board IP Address: 192.168.1.x, where 'x' is determined by the binary value of SW2 SW3 SW4 + 200. The range for 'x' is 200-207. (e.g., SW2=ON, SW3=OFF, SW4=ON (binary 010b) + 200 = 202).
    • RX Board IP Address: 192.168.1.x, where 'x' is determined by the binary value of SW2 SW3 SW4 + 208. The range for 'x' is 208-215. (e.g., SW2=ON, SW3=OFF, SW4=ON (binary 010b) + 208 = 210).

Important Notes on DIP Switches:

  • The system will restart after DIP switch settings are changed.
  • A maximum of 8 IP address sets can be configured via DIP switches. For applications outside this range, use the web interface for pairing.
  • Point-to-Multi-point Mode: Both TX and RX SW1 should be "OFF". TX SW2/3/4 can be set arbitrarily. Multiple RX units must have different SW2/3/4 settings.
  • Multi-point-to-Multi-point Mode: Both TX and RX SW1 should be "ON". The SW1/2/3/4 settings on the TX unit must match those on the RX unit.

Web Interface Configuration

For more advanced settings (e.g., MAC address, gateway, multicast group, device name) or if the DIP switch range is insufficient, you can use the web interface.

  1. Access: Open a web browser and enter `ip:9999` (e.g., if the TX IP is 192.168.1.202, enter `192.168.1.202:9999`).
  2. Settings: The web interface allows you to configure various parameters. Note that web settings will override DIP switch settings.
  3. Restore Factory Defaults: To revert to factory default DIP switch settings, enter `888888` in the "Restore" field on the web interface and click "Commit". The device will restart.
  4. MAC Address: The MAC address is automatically generated and fixed upon the first power-on and remains constant thereafter.
  5. Network Setup: For proper RX/TX pairing, ensure both extender units and the connected PC are on the same Local Area Network (LAN).
  6. Finding RX IP: If the RX unit is not connected to the network cable, its IP address will be displayed on the connected monitor.

8. Application Diagrams

The HDMI KVM IP Extender supports various application scenarios:

Point-to-Point Connection

Diagram showing a point-to-point connection of the HDMI KVM IP Extender, connecting a source to a display and KVM peripherals over a single CAT6 cable.
Point-to-Point Connection: Extends HDMI and KVM signals from one source to one display over a single CAT6 cable.

One-to-Many Application over Ethernet

Diagram showing a one-to-many application of the HDMI KVM IP Extender, where one Transmitter connects to multiple Receivers via an Ethernet switch.
One-to-Many Application: One Transmitter (TX) unit can send signals to up to 253 Receiver (RX) units via an Ethernet switch.

Many-to-Many Application over Ethernet

Diagram showing a many-to-many application of the HDMI KVM IP Extender, where multiple Transmitters connect to multiple Receivers via an Ethernet switch.
Many-to-Many Application: Up to 99 Transmitters (TX) can connect to up to 99 Receivers (RX) via an Ethernet switch, allowing flexible signal routing.

Note: The transmission distance through an Ethernet switch is 200 meters before and after the switch.

Example Use Cases:

  • Audio-visual conferences
  • Command and control centers
  • Home theater systems

9. Video Demonstration

Watch this video for a visual guide on setting up and using the HDMI KVM IP Extender.

Video demonstrating the setup and functionality of the 300M HDMI KVM IP Extender.

10. Troubleshooting

  • No Display/Signal:
    • Ensure all HDMI and Ethernet cables are securely connected.
    • Verify that both TX and RX units are powered on and their PWN, Status, and Link indicators are active.
    • Check the DIP switch settings on both units to ensure they are correctly configured for your desired connection mode (point-to-point, multi-point).
    • Test with different HDMI cables or a shorter Ethernet cable if possible.
    • If using a network switch, ensure it is functioning correctly.
  • KVM (Keyboard/Mouse) Not Working:
    • Confirm that the USB cable is connected from the TX unit's "USB-PC" port to your computer.
    • Ensure the mouse and keyboard are plugged into the correct USB ports on the RX unit.
    • The RX USB interface only supports wired USB mice and standard 104 wired keyboards. Other devices or wireless peripherals may not be supported.
    • Check if the computer recognizes the KVM devices.
  • IR Control Not Functioning:
    • Ensure the IR receiver is plugged into the RX unit and the IR transmitter into the TX unit.
    • Verify that the IR transmitter is correctly aimed at the IR sensor of the device you wish to control.
    • Check for any obstructions between the IR transmitter and the controlled device.
  • Connection Issues (Link Indicator Off/Flashing):
    • Inspect the CAT5e/6 cable for damage.
    • Ensure the cable is properly terminated (T-568B standard recommended).
    • Try a different CAT5e/6 cable.
    • If using a network switch, ensure it is compatible and configured correctly.

11. User Tips

  • Always use qualified CAT6 T-568B cables with copper conductors for optimal performance and to achieve the maximum transmission distance.
  • The Ethernet cable length should not be less than 5 meters to ensure stable signal transmission.
  • The USB interface on the Receiver (RX) unit is specifically designed for wired USB mice and standard 104 wired keyboards. Compatibility with other USB devices, such as MIDI controllers, is not guaranteed.
  • Remember that at least one Transmitter (TX) and one Receiver (RX) unit are required for the system to function.

12. Warranty and Support

For any issues not covered in this manual or for further assistance, please contact your retailer or the manufacturer's customer support. Keep your purchase receipt for warranty claims.

A user manual in PDF format is available for download here.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.