1. Product Overview
The Monster XKT16 Bluetooth 5.3 Earphones combine a distinctive mechanical design with advanced audio technology to deliver an immersive listening experience. Featuring a comfortable half-in-ear fit, these earbuds are equipped with Bluetooth 5.3 for stable and efficient wireless connectivity, 13mm composite diaphragms for high-fidelity sound, and sensitive touch controls for easy management of calls and music. The durable charging case provides extended battery life, making them ideal for gaming, sports, and everyday use.


2. Package Contents
Please check the package contents upon unboxing to ensure all items are present:
- Monster XKT16 Earphones (2 units)
- Charging Case
- Type-C Charging Cable
- User Manual (this document)
3. Setup and First Use
3.1 Charging the Earphones and Case
Before first use, fully charge the earphones and the charging case.
- Place both earphones into the charging case.
- Connect the provided Type-C charging cable to the charging port on the case and plug the other end into a 5V power adapter (not included).
- The indicator light on the charging case will show charging status. A full charge for the earphones takes approximately 1.5 hours.
- Once charging is complete, disconnect the charging cable to prevent potential damage from prolonged overcharging.

3.2 Power On/Off
Power On:
- Method 1 (Automatic): Open the charging case cover. The earphones will automatically power on.
- Method 2 (Manual): Press and hold the Multi-Function Button (MFB) on either the left or right earphone for 3 seconds.
Power Off:
- Method 1 (Automatic): Place both earphones back into the charging case and close the cover. The earphones will automatically power off.
- Method 2 (Automatic): If the earphones are disconnected from a Bluetooth device for 3 minutes, they will automatically power off.
3.3 Bluetooth Pairing
Follow these steps to pair your Monster XKT16 earphones with a Bluetooth-enabled device:
- Step 1: Open the charging case cover and take out the earphones. They will automatically enter pairing mode.
- Step 2: On your smart device (phone, tablet, computer), go to the Bluetooth settings and search for available devices.
- Step 3: Select "Monster Airmars XKT16" from the list.
- Step 4: Once connected successfully, you will hear an audio prompt "Connected".
*Note: If the earphones are disconnected and brought back within range of the paired device within 3 minutes, they will automatically reconnect.


4. Operating Instructions
The Monster XKT16 earphones feature sensitive touch controls on each earbud. Refer to the diagram and instructions below for various functions:

4.1 Regular Mode (Calls)
- Answer/End Call: Double Click Left/Right MFB
- Reject Call: Long Press 2s Left/Right MFB
- Voice Assistant: Long Press 2s Left MFB

4.2 Music Mode
- Pause/Play: Double Click Left/Right MFB
- Previous/Next Track: Three Strikes L/R MFB
- Gaming Mode: Long Press 2s Right MFB
The earphones feature 360° surround sound and high-fidelity HiFi sound quality for an immersive audio experience.


4.3 Gaming Mode
To activate Gaming Mode, Long Press 2s Right MFB. This mode is designed to provide a low-latency experience for gaming, ensuring sound and picture synchronization.

5. Maintenance and Care
- Cleaning: Use a soft, dry cloth to clean the earphones and charging case. Do not use liquids or abrasive cleaners.
- Storage: If the product is not used for a long period, ensure it is fully charged and powered off before storing. Recharge periodically (e.g., every 3 months) to maintain battery health.
- Charging Precautions: Always disconnect the charging cable once charging is complete to prevent potential damage from prolonged overcharging.
- Water Resistance: The earphones are waterproof, but avoid prolonged exposure to water or submersion.
6. Troubleshooting
- Earphones not pairing with each other or only one earphone connects:
Ensure both earphones are fully charged. Place both earphones back into the charging case, close the lid, wait a few seconds, then open the lid and take them out again. This should reset their connection. If the issue persists, try forgetting the device from your phone's Bluetooth settings and re-pairing from scratch.
- Earphones not connecting to the app:
The product description and specifications do not indicate support for a dedicated mobile application. Connectivity is primarily via standard Bluetooth to your device's audio output. If you are attempting to connect to an app, please verify if an official app is available for this specific model.
- No sound or low volume:
Check the volume levels on both your connected device and the earphones. Ensure the earphones are properly seated in your ears. Try disconnecting and reconnecting the Bluetooth connection.
- Intermittent connection or audio drops:
Ensure you are within the Bluetooth range (≥10 meters) of your connected device. Avoid obstacles between the earphones and the device. Try disconnecting and reconnecting. Ensure there are no other strong wireless signals interfering.
- Touch controls not responding:
Ensure your fingers are clean and dry. Try restarting the earphones by placing them in the case and taking them out again. If the issue persists, ensure the earphones are fully charged.
7. Specifications

| Feature | Specification |
|---|---|
| Product Model | Monster Airmars XKT16 |
| Bluetooth Version | V5.3 |
| Horn Unit (Driver Diameter) | 13mm |
| Bluetooth Range | ≥ 10m |
| Charging Port | Type-C |
| Sensitivity | 108dB ± 3dB |
| Frequency Response Range | 20Hz ~ 20KHz |
| Maximum Power | 5mW * 2 |
| Charging Time (Earphones) | ~1.5h |
| Recreation Time (Playback) | ~4h |
| Charging Case Capacity | 300mAh |
| Channel System | Stereo |
| Material | Metal, ABS |
| Features | Waterproof, With microphone, Apple Siri Support, Active Noise Cancelling |
| Codecs | AAC |
| Style | In-ear |
| Certification | CE |
8. User Tips
- Mode Indication: While the earphones switch between Music Mode and Gaming Mode, there isn't a clear visual indicator on the earphones themselves. You might notice a difference in audio latency or specific audio cues when switching.
- Noise Reduction: The earphones feature Active Noise Cancelling (ANC) for an improved listening experience, especially in noisy environments.
- Single Earbud Use: The earphones support independent use. You can use a single earbud for calls or music playback while the other is in the charging case.
- No Wireless Charging: Based on the specifications, these earphones do not support wireless charging. Please use the provided Type-C cable for charging.
9. Warranty and Support
For warranty information and customer support, please refer to the documentation provided with your purchase or contact the seller directly. A detailed user manual in PDF format is also available for download: Monster XKT16 User Manual (PDF).