1. Introduction
The SP633E is a three-channel PWM RGB LED controller designed to provide dynamic, music, and DIY lighting effects. It allows users to set the perfect ambiance for any scene through its versatile control options.
2. Features
- Supports App control via Bluetooth and 2.4G touch remote control (and 2.4G touch 86-type control panel, sold separately).
- Offers a variety of dynamic, music, and DIY lighting effects.
- Supports effect collection for easy access to favorite settings.
- Capable of capturing music through the phone microphone, player streamer, and on-board microphone for synchronized lighting.
- Includes sequential channel calibration and ON/OFF timer functions.
- Supports OTA firmware upgrades for continuous improvement and new features.
3. Specifications
| Parameter | Value |
|---|---|
| Model Number | WM-SP633E |
| Brand Name | WELLMEET |
| Item Type | Dimmers |
| Material | Plastic |
| Working Voltage | DC 5-24V |
| Working Current | 1mA~10mA |
| PWM Single Channel Max Output Current | 6A |
| PWM Total Max Output Current | 12A |
| Working Temperature | -20℃~60℃ |
| Dimensions | 78mm*56mm*20mm |
| Certification | CE, ROHS |
4. Installation Precautions
- This product should be debugged and installed by someone with professional qualifications.
- This product is not waterproof and needs to be protected from sunlight and rain. If installed outdoors, please use a waterproof box.
- Good heat dissipation conditions will extend the service life of LED controllers. Please install the product in a well-ventilated environment.
- Do not install or use this type of product in areas with lightning, strong magnetic fields, or high voltage.
- Please check if the output voltage of the LED power supply used meets the requirements of the product voltage range.
- The diameter and size of the wires used must be sufficient to load the LED lighting fixtures connected, and ensure that the wiring is secure to prevent wires from passing through, accidents triggered by heat, or poor contact.
- Before powering on and debugging, it is necessary to ensure that all wiring is correct to avoid damage to the lighting fixtures due to wiring errors.

5. Setup and Wiring
Ensure all power is disconnected before proceeding with wiring. Connect the LED strip and power supply to the SP633E controller as shown in the diagram below. Pay close attention to the polarity (V+, R, G, B) for correct functionality.

6. Operating Instructions
6.1. App Control (BanlanX App)
The SP633E controller supports control via the BanlanX App on iOS (10.0 or higher) and Android (4.4 or higher) devices. You can download the app by searching "BanlanX" in your device's App Store or Google Play, or by scanning the QR code provided on the product or packaging.

App Operations:
- Adding a Device: Open the App, click the 'plus' (+) icon in the top right corner of the home page to add your SP633E device.
- Settings: Click the 'gear' (⚙) icon in the upper right corner of the App to enter the settings page. Here you can modify the device name, set timings, configure on/off effects, and perform OTA firmware upgrades.
- Color Selection: Use the color wheel in the app to select static colors.
- Brightness Adjustment: Adjust the brightness using the slider in the app.
- Dynamic Modes: Select from various dynamic modes for animated lighting effects.
- Music Mode: Activate music mode to synchronize lighting with audio input.
- DIY Customization: Create and save your own custom lighting effects.
6.2. 2.4G Touch Remote Control
The SP633E controller can also be operated using compatible 2.4G touch remote controls, such as models RB3 and RC3 (sold separately). These remotes offer convenient control over various lighting functions.

Remote Control Features:
- One-to-many control: One remote can control multiple controllers.
- Many-to-one control: Each controller can bind up to 5 remote controls.
- Unified control: Supports unified control and 4-zones control.
- Static Color Selection: Use the color wheel on the remote to select desired static colors.
- Brightness Adjustment: Adjust light brightness using the dedicated controls.
- Mode Switching: Cycle through various dynamic lighting modes.
- Speed Adjustment: Control the speed of dynamic effects.
- Music Mode: Activate music synchronization for lights.
Note: For more information on remote control usage, refer to the specific "2.4G Touch Remote Control Instructions" manual.
6.3. Visual Demonstration
7. User Tips
- For optimal performance, ensure your power supply is stable and within the DC 5-24V range.
- If experiencing connectivity issues with the app, try restarting both the controller and your mobile device, then re-attempt pairing.
- When using music synchronization, place your phone or the controller near the audio source for better rhythm detection.
- Regularly check for OTA firmware updates through the BanlanX app to ensure you have the latest features and bug fixes.
8. Troubleshooting
- Lights not turning on: Check all wiring connections (V+, R, G, B, GND) for correct polarity and secure contact. Verify the power supply is connected and providing the correct voltage (DC 5-24V).
- App not connecting: Ensure Bluetooth is enabled on your mobile device. Make sure the controller is powered on and within range. Try closing and reopening the BanlanX app, or restarting your phone.
- Remote control not working: Check if the remote control has fresh batteries. Ensure the remote is paired correctly with the controller.
- Incorrect colors or flickering: This could indicate incorrect wiring of the RGB channels or an incompatible LED strip. Double-check the wiring diagram and ensure your LED strip is a common anode RGB type.
- Intermittent operation: Ensure the controller is in a well-ventilated area to prevent overheating. Check for strong magnetic fields or high voltage sources nearby that might interfere with operation.
9. Warranty and Support
Our LED controller products provide lifelong technical support and warranty services.
Free Warranty:
If any quality issues occur within two years from the date of purchase, our company will provide free repair or service replacement.
Paid Warranty:
Products that exceed the free warranty period will be charged a certain cost of repair materials.
Exclusions from Free Warranty:
- Damage caused by excessive voltage, overload, improper operation, etc.
- Any wiring errors, water immersion (for non-waterproof products), and unauthorized repairs.
- Any serious damage or deformation to the appearance caused by transportation or knocking.
- The product appearance is severely damaged or deformed.
- Damage caused by natural disasters and uncontrollable human factors, such as earthquakes, floods, fires, etc.
Repair and Replacement Process:
- Our company's maximum responsibility for factory products is to replace them with products of the same model and quantity.
- To speed up the repair or replacement process, please indicate the fault phenomenon, operating environment, and actions taken when the fault occurred to ensure that the repair situation is quickly resolved.
- As long as we receive the returned product and initial accessories, we promise to replace or repair them for the customer, and the logistics cost of the return will be borne by the customer.