T&G TG166

Contents

T&G TG166 Portable Mini Wireless Bluetooth Speaker User Manual

Model: TG166

1. Introduction

Thank you for choosing the T&G TG166 Portable Mini Wireless Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. Please read it carefully to ensure optimal performance and longevity of your device.

2. Product Features

  • Waterproof Design: Ideal for outdoor activities and protection against splashes.
  • Bluetooth 5.0 Connectivity: Ensures a stable and fast wireless connection with your devices.
  • Multiple Playback Options: Supports TF (Micro SD) card and USB drive for MP3 audio playback.
  • FM Radio Function: Automatic search for radio stations.
  • Portable and Lightweight: Compact design with a self-equipped drawstring for easy carrying.
  • Hi-Fi Speaker: Delivers clear and bright sound quality.
  • Hands-free Calling: Built-in microphone for convenient phone calls.
  • TWS (True Wireless Stereo) Support: Connect two TG166 speakers for a stereo sound experience.
  • Automatic Power Off: The speaker will automatically turn off after 30 minutes of Bluetooth disconnection to save power.

3. Specifications

FeatureDetail
Wireless VersionV5.0
Wireless ProtocolsL2CAP/A2DP/AVRCP, HSP/HFP
Working DistanceUp to 10 meters
Signal-to-Noise Ratio (SNR)≥90dB
Battery3.7V 500mAh
Normal Volume Playback TimeApproximately 2 hours
Speaker Driver¢45mm * 1
Power Output4Ω/5W * 1
Frequency Response120Hz-20KHz
Unit Size (L*W*H)86.5mm * 72.3mm * 31.6mm
Unit Weight172g
Charging Input5V/500mAh (Micro USB)

4. Package Contents

  • T&G TG166 Portable Mini Wireless Bluetooth Speaker
  • Micro USB Charging Cable
  • User Manual
  • Drawstring (attached to speaker)

5. Device Layout and Controls

Familiarize yourself with the speaker's ports and buttons:

Diagram of T&G TG166 speaker with labeled ports and control buttons.

Figure 1: Speaker Ports and Controls

Key and Slot Functions:

  1. DC 5V Slot: Use the standard Micro USB V8 charging cable for power charging.
  2. TF Slot: Insert a TF (Micro SD) card to decode and play MP3 format audio.
  3. USB Slot: Insert a USB drive to decode and play MP3 format audio.
  4. Power Switch (ON/OFF): Slide to power the speaker on or off.
  5. Play/Pause Button (►▮):
    • Music Mode (USB/TF/Wireless): Short press to play or pause music.
    • FM Mode: Short press to automatically search for radio stations; press again to stop searching.
    • Wireless Mode (with mobile paired): Short press to answer an incoming call hands-free; press again to hang up; double press to redial the last call.
  6. Previous Track / Volume Down Button (-):
    • Music Mode: Short press for the previous song.
    • Music Mode: Long press to decrease the volume.
  7. Next Track / Volume Up Button (+):
    • Music Mode: Short press for the next song.
    • Music Mode: Long press to increase the volume.
  8. Mode Switch / TWS Button (M):
    • Short Press: Switch between playback modes (USB card, TF card, Wireless, Line In, FM).
    • TWS Pairing: Keep two TG166 speakers under Wireless mode without pairing to a mobile device. Press the 'M' key for 3 seconds on either speaker until you hear a hint and the button light stops flashing. The speakers are now in TWS pairing mode and can be paired with your mobile device for stereo sound.

6. Setup and Initial Use

6.1 Charging the Speaker

Before first use, fully charge the speaker. Connect the provided Micro USB charging cable to the DC 5V slot on the speaker and the other end to a 5V USB power source (e.g., a wall adapter, computer USB port). The charging indicator light will show the charging status (specific light behavior not detailed, typically red for charging, off/blue for full).

6.2 Powering On/Off

Slide the Power Switch to the 'ON' position to turn on the speaker. You will hear an audible prompt. To turn off, slide the Power Switch to the 'OFF' position.

7. Operating Instructions

7.1 Bluetooth Pairing

  1. Ensure the speaker is powered on and in Wireless (Bluetooth) mode. If not, short press the 'M' button to switch modes until you hear the Bluetooth pairing prompt.
  2. On your mobile device (phone, tablet, laptop), enable Bluetooth and search for available devices.
  3. Select 'TG166' from the list of devices.
  4. Once paired, you will hear a confirmation sound, and the speaker is ready to play audio from your device.
Image showing the T&G TG166 speaker compatible with various Bluetooth devices like phones, iPads, and laptops.

Figure 2: Device Compatibility

7.2 Playing Music from TF Card or USB Drive

  1. Insert a TF card into the TF slot or a USB drive into the USB slot. Ensure the card/drive contains MP3 format audio files.
  2. The speaker should automatically switch to the corresponding mode and begin playing. If not, short press the 'M' button to cycle through modes until TF or USB mode is active.
  3. Use the Play/Pause, Previous Track, and Next Track buttons to control playback.

7.3 FM Radio Operation

  1. Short press the 'M' button to switch to FM mode.
  2. Short press the Play/Pause button (►▮) to automatically search for available radio stations. The speaker will scan and save stations.
  3. Once scanning is complete, use the Previous Track (-) and Next Track (+) buttons to navigate between saved stations.
  4. Note: For better FM radio reception, connect the Micro USB charging cable to the DC 5V slot; it acts as an antenna.

7.4 Hands-free Calling

When your speaker is paired with your mobile phone via Bluetooth:

  • Answering a Call: Short press the Play/Pause button (►▮) when a call comes in.
  • Ending a Call: Short press the Play/Pause button (►▮) during a call.
  • Redialing: Double press the Play/Pause button (►▮) to redial the last number.

7.5 TWS (True Wireless Stereo) Function

To pair two TG166 speakers for stereo sound:

  1. Ensure both TG166 speakers are powered on and in Wireless (Bluetooth) mode, but not yet paired to any mobile device.
  2. On one of the speakers, long press the 'M' button for 3 seconds until you hear a hint sound and the button light stops flashing. This speaker is now searching for another TWS speaker.
  3. The two speakers will automatically connect to each other. You will hear a confirmation sound.
  4. Now, enable Bluetooth on your mobile device and search for 'TG166'. Pair with this single entry. Both speakers will now play audio in stereo.

8. Maintenance

  • Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Avoid exposing the speaker to extreme temperatures, direct sunlight, or high humidity for extended periods.
  • Store the speaker in a cool, dry place when not in use.
  • Do not attempt to disassemble or repair the speaker yourself, as this will void the warranty and may cause damage.

9. Troubleshooting

  • Speaker does not turn on: Ensure the battery is charged. Connect the speaker to a power source using the Micro USB cable.
  • No sound: Check the volume level on both the speaker and your connected device. Ensure the correct mode (Bluetooth, TF, USB, FM) is selected.
  • Bluetooth connection issues: Ensure the speaker is in pairing mode and within 10 meters of your device. Turn off and on Bluetooth on your device, then try pairing again.
  • Speaker automatically turns off: This is a feature. If the speaker is disconnected from Bluetooth for 30 minutes, it will power off to save battery. Reconnect or power on again.
  • Poor FM radio reception: Connect the Micro USB charging cable to the DC 5V slot; it functions as an external antenna to improve signal quality.
  • Charging issues: Ensure the charging cable and adapter are working correctly. Try a different cable or power source.

10. User Tips

  • Maximize Battery Life: To extend playback time, avoid using the speaker at maximum volume for prolonged periods.
  • Improved FM Reception: Always plug in the Micro USB charging cable when using FM radio for the best signal.
  • Portability: Utilize the integrated drawstring for easy carrying during travel or outdoor activities.
  • Charging Reminder: If the speaker is not charging, ensure the charging cable is securely connected to the DC 5V slot and the power source.

11. Safety Information

  • Do not expose the speaker to fire or extreme heat.
  • Do not immerse the speaker in water, despite its waterproof rating, to prevent damage.
  • Keep out of reach of children.
  • Use only the specified charging voltage (DC 5V).
  • Avoid listening at high volumes for extended periods to prevent hearing damage.

12. Warranty and Support

This product comes with a standard manufacturer's warranty. For warranty claims or technical support, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty-related inquiries.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.