ASOMETECH 65W GaN USB Type C Charger

1. Introduction

Thank you for choosing the ASOMETECH 65W GaN USB Type C Charger. This compact and efficient charger utilizes advanced GaN (Gallium Nitride) technology to provide high-speed charging for a wide range of devices, including laptops, tablets, and smartphones. With its multiple output ports and intelligent charging capabilities, it is designed to be your versatile power solution on the go.

2. Safety Information

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in fire, electric shock, damage to the product, or other hazards.

• Do not store the product in high-temperature environments, strong light, or strong magnetic fields. Avoid placing it near fire sources or in other harsh conditions.
• If water enters the product, allow it to dry naturally before attempting to use it again.
• Improper use of this product can easily damage it or pose risks to personal and property safety. The user bears responsibility for losses due to improper use or ignoring warnings.
• It is strictly prohibited for non-professionals to attempt to disassemble or repair this product.
• Avoid using household appliances or loads that exceed the output current of this product. The charger has built-in circuit protection that will prevent output if overloaded.
• Avoid physical actions such as hitting, throwing, stepping on, or squeezing the charger.
• The charger is suitable only for indoor and dry, non-humid environments.

3. Product Overview

The ASOMETECH 65W GaN Charger features three output ports: two USB-C ports (USB-C1, USB-C2) and one USB-A port. It supports various fast charging protocols including PD3.0, PPS, QC3.0, Huawei FCP, and Samsung Adaptive Fast Charge.

3.1 Plug Types

The charger is available with multiple plug types to suit different regions:

• EU Plug
• US Plug
• UK Plug
• KR Plug (Korea Plug)

4. Specifications

5. Setup

1. Unpack the Charger: Carefully remove the charger from its packaging.
2. Select Correct Plug Type (if applicable): Ensure you have the correct plug type for your region (EU, US, UK, KR).
3. Connect to Power Outlet: Plug the charger into a compatible wall power outlet.

6. Operating Instructions

6.1 Charging Single Device

Connect your device to any available USB-C (C1 or C2) or USB-A port using a compatible charging cable. The charger will automatically detect your device and deliver the optimal charging power up to its maximum capacity for that port.

• USB-C1/C2: Up to 65W Max for laptops, tablets, and phones.
• USB-A: Up to 27W Max for phones and other compatible devices.

6.2 Charging Multiple Devices Simultaneously

The ASOMETECH 65W GaN charger can charge up to three devices concurrently. The power distribution will adjust based on the connected devices and their charging requirements. The total maximum output is 65W.

6.3 Power Distribution Scenarios

The charger intelligently distributes power across its ports. Here are common scenarios:

• 1 Port Charging: USB-C1 or USB-C2 can deliver up to 65W. USB-A can deliver up to 27W.
• 2 Ports Charging:
  • USB-C1 + USB-C2: 45W + 20W (65W Max total)
  • USB-C1 + USB-A: 45W + 18W (63W Max total)
  • USB-C2 + USB-A: 24W Max (5V⎓4.8A)
• 3 Ports Charging:
  • USB-C1 + (USB-C2 + USB-A): 45W + 15W (5V⎓3A) (60W Max total)

6.4 Compatibility

The charger is widely compatible with various devices, including:

• Laptops: Apple (MacBook), Huawei (MateBook X Pro/14), Xiaomi (Laptop Pro 15/14), ASUS.
• Phones: Apple (iPhone 14/14Pro/14Plus/14Pro Max/13...), Huawei (P50/P50 Pro/Mate50/50 Pro/40/40 Pro...), Xiaomi (Redmi K40 series...), Samsung (S22/S21/S21+/S20/S20+/S10...).
• Tablets: Apple (iPad Pro 10.5/11/12.9, iPad Air/iPad Mini/8), Huawei (Mate Pad Pro/SE/2022/2021...), Xiaomi (Pad/8 Pro/4, Redmi Pad...), Samsung (Galaxy Tab A8/S8/S8 Ultra...).
• Others: AirPods, MagSafe, Nintendo Switch.

7. Maintenance

• Keep the charger clean and dry. Avoid exposure to dust, dirt, and moisture.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the charger. Wipe with a soft, dry cloth.
• Store the charger in a cool, dry place when not in use.
• Regularly check the charging cables for any signs of wear or damage. Replace damaged cables immediately.

8. Troubleshooting

• Charger feels warm during use: This is normal for high-power GaN chargers. Our AI Temperature Control (AITC) technology actively monitors and manages heat to ensure it remains within safety standards.
• Power readout does not match device's maximum advertised wattage: Devices like phones and laptops use intelligent, adaptive charging. Peak power is typically drawn when the battery is very low. Power intake decreases as the battery fills to preserve health. Other factors like active screen use can also reduce power draw. This is a normal function of a sophisticated charging system.
• Charging power does not reach advertised levels: This may not be solely attributed to the charger. The quality of the charging cable plays a significant role. Ensure you are using a high-quality cable that supports the required wattage (e.g., >60W cables often require an E-Marker chip). Also, verify if your device supports full-power charging.
• Device not charging or charging slowly:
  • Ensure the charger is properly plugged into a working power outlet.
  • Check the charging cable for damage and ensure it is securely connected to both the charger and your device.
  • Try a different port on the charger or a different charging cable.
  • Verify your device's charging requirements and ensure they are compatible with the charger's output.

9. User Tips

• For optimal fast charging using PD3.0 PPS, always use the USB-C1 or USB-C2 ports.
• If your device supports QC3.0 fast charging, the USB-A port is recommended.
• Always use high-quality charging cables, especially for devices requiring more than 60W, as these often need cables with an E-Marker chip.
• The charger's compact and portable design makes it ideal for travel.
• This charger is known for its reliability and consistent performance.

10. Environmental Information

This product complies with environmental regulations regarding toxic or hazardous substances. The table below indicates the presence of such substances in various components:

O: Indicates that contents of the toxic and hazardous substances in all homogeneous materials are below the limit requirements specified by IEC 62368-1:2018, CSA/UL 62368-1:2019, EMC(2014/35/EU), LVD(2014/35/EU), ROHS(2011/65/EU) standard.

X: Indicates that contents of the toxic and hazardous substances exceed the limit requirements specified in IEC 62368-1:2018, CSA/UL 62368-1:2019, EMC(2014/35/EU), LVD(2014/35/EU), ROHS (2011/65/EU) standard in at least one homogeneous material of the part.

The information provided is based on supplier data and ROHS detection results. At the current technology level, the use of all toxic and hazardous substances or elements is controlled to the bottom line, but immunity of EU ROHS directive is followed. The environmental protection limit lasts 5 years.

11. Certifications

This product is certified to meet various international quality and safety standards, including:

• CCC (China Compulsory Certification)
• CE (Conformité Européenne)
• ROHS (Restriction of Hazardous Substances)
• FCC (Federal Communications Commission)
• UL (Underwriters Laboratories)
• CB (Certification Body)

12. Warranty and Support

For detailed warranty information and customer support, please refer to the official user manual PDF available for download. This document provides comprehensive details on product guarantees and how to obtain assistance.

You can access the full user manual PDF here: ASOMETECH 65W GaN Charger User Manual (PDF)