1. Introduction
The AYINO DA310B is a versatile, multi-functional audio decoding and playback device designed for K-song entertainment and high-fidelity audio. It features a new high-fidelity custom chip with built-in DSP+9 EQ sound processing and an independent ear amplifier, meticulously adjusted by experienced engineers.
The DA310B supports a wide range of input modes including Optical, Coaxial, Bluetooth 5.3 reception, U disk, PC-USB, and AUX, along with a 6.5mm microphone input. It supports 192K 24BIT digital-to-analog conversion and Bypass pass-through, allowing any wired input to be synchronized across multiple audio devices. This enables seamless connection of audio from TVs, computers, mobile phones, set-top boxes, and other playback equipment to traditional speakers, power amplifiers, or headphones via various wired or wireless Bluetooth inputs. Additionally, its Bluetooth transmission function allows wireless audio streaming to Bluetooth headphones or speakers.
Equipped with a standard remote control, the DA310B offers full functionality, including K-song and sound effect adjustments, and supports multimedia playback control for computer and OTG-enabled mobile devices. It provides diverse usage options to meet various music playback, cinematic sound, and entertainment K-song audiovisual needs.
2. Package Contents
Please check the box for the following items:
- AYINO DA310B Main Unit
- Power adapter
- Power cable
- Optical fiber cable
- 3.5mm to R&L RCA cable
- Bluetooth Antenna
- Remote control

Figure 2.1: Package Contents
3. Product Overview
3.1 Front Panel

Figure 3.1: Front Panel Layout
- MIC: 6.5mm Microphone Input
- Headphone Jack: 3.5mm AUX headphone amplifier Output
- IR: Remote control reception window
- Previous Song Button
- Play/Pause Button
- Next Song Button
- Volume Knob: Short press for Mode switch; Long press for power shutdown.
Indicator Lights:
- BR (Bluetooth Reception): Indicates Bluetooth reception mode.
- BT (Bluetooth Transmission): Indicates Bluetooth transmission mode.
- USB: Indicates PC-USB sound card input mode.
- OPT: Indicates Optical input mode.
- COX: Indicates Coaxial input mode.
- OTG: Indicates U disk playback mode.
- AUX: Indicates AUX input mode.
3.2 Back Panel

Figure 3.2: Back Panel Layout
- DC5V: Power input interface (5V/1A).
- OTG/USB: USB input port for U disk or PC-USB sound card.
- AUX: AUX input port.
- COX: Coaxial input port.
- OPT: Optical input port.
- Output L/R: Left and Right channel RCA output ports.
- ANT: Antenna connector for Bluetooth.
3.3 Remote Control

Figure 3.3: Remote Control Functions
- Power Button: Turns the device on/off.
- EQ Button: Cycles through multiple sound effect options (Normal, 3D, Enhanced Bass, 3D+Enhanced Bass).
- Bluetooth Transmission Button:
- Short press: Enable Bluetooth transmission, automatically connect or match new devices.
- Long press: Turn off Bluetooth transmission, disconnect Bluetooth connection, or re-match new equipment.
- Volume Up/Down Buttons
- Previous/Next/Play/Pause Buttons: For media playback control.
- K-song Buttons (ECHO, MIC+, MIC-): Adjust reverb and microphone volume.
- Number Buttons (0-9): For U disk playback mode, supports 4-digit song selection.
- Input Selection Buttons (OTG, USB, OPT, COX, AUX): Directly select input sources.
- REST Button: Restores default values for Sound Effects (Normal), Cycle Order, and Reverb/Accompaniment/Mark Style.
4. Setup
4.1 Power Connection
- Connect the provided power adapter to the DC5V port on the back of the DA310B.
- Plug the power adapter into a suitable power outlet.
4.2 Antenna Installation
- Screw the external Bluetooth antenna onto the ANT connector on the back panel.
- Ensure the antenna is securely attached and positioned for optimal signal reception.
4.3 Wired Audio Input Connections
Connect your audio source devices to the DA310B using the appropriate cables:
- Optical Input: Connect a TV, set-top box, or other device with an optical output to the OPT port using an optical fiber cable.
- Coaxial Input: Connect a device with a coaxial output to the COX port using a coaxial cable.
- USB Input (PC-USB/OTG): Connect a computer via a USB cable to the OTG/USB port for PC sound card functionality. For mobile phones supporting OTG, connect via a suitable OTG cable to the OTG/USB port.
- AUX Input: Connect devices with a 3.5mm audio output to the AUX port using a 3.5mm audio cable.

Figure 4.1: General Connection Diagram
4.4 Audio Output Connections
Connect your audio output devices to the DA310B:
- RCA Output: Connect traditional speakers or power amplifiers to the L and R RCA output ports using an RCA cable (e.g., the included 3.5mm to R&L RCA cable).
- Headphone Output: Connect headphones to the 3.5mm headphone jack on the front panel.
4.5 Microphone Connection
- Connect a 6.5mm microphone to the MIC input port on the front panel for K-song functionality.

Figure 4.2: Microphone Connection
5. Operating Instructions
5.1 Power On/Off
- Power On: The device will automatically power on when connected to power.
- Power Off: Long press the Volume knob on the front panel to shut down the device.
- The DA310B supports power memory, automatically restoring the previous state upon power-on.
5.2 Input Mode Selection
- Using the Volume Knob: Short press the Volume knob on the front panel to cycle through the input modes (BT, USB, OPT, COX, OTG, AUX). The corresponding indicator light will illuminate.
- Using the Remote Control: Press the dedicated input buttons (OTG, USB, OPT, COX, AUX) on the remote control to directly select the desired input source.
5.3 Volume Control
- Using the Volume Knob: Rotate the Volume knob on the front panel clockwise to increase volume and counter-clockwise to decrease volume.
- Using the Remote Control: Press the Volume Up (+) or Volume Down (-) buttons on the remote control.
5.4 Bluetooth Reception Mode

Figure 5.1: Wireless Bluetooth Reception
- Ensure the DA310B is powered on and the Bluetooth antenna is connected.
- Short press the Volume knob or the 'BT' button on the remote to switch the DA310B to Bluetooth reception mode (BR indicator will light up).
- On your mobile phone, tablet, or computer, enable Bluetooth and search for available devices.
- Select "DA310" from the list of devices to pair. Once paired, audio from your device will be streamed to the DA310B.
5.5 Bluetooth Transmission Mode

Figure 5.2: Wireless Bluetooth Transmission
- Ensure the DA310B is powered on and receiving audio from a wired input source (Optical, Coaxial, U disk, PC-USB, or AUX).
- Short press the Bluetooth transmission button on the remote control. The BT indicator will light up.
- The DA310B will automatically search for and connect to nearby Bluetooth headphones or speakers. If multiple devices are available, it may connect to the last paired device or the closest one.
- To disconnect or re-match, long press the Bluetooth transmission button on the remote.
Note: Simultaneous activation of Bluetooth reception and transmission modes is not supported.
5.6 U Disk Playback

Figure 5.3: U Disk Playback
- Insert a U disk (formatted as FAT32, maximum capacity 128GB) into the OTG/USB port.
- Switch the DA310B to OTG mode (OTG indicator will light up).
- Use the Previous/Next/Play/Pause buttons on the device or remote to control playback.
- For digital song selection, use the number buttons (0-9) on the remote control (supports 4-digit song selection).
Important: Please turn off Bluetooth transmission when playing high bit rate audio from the U disk to ensure optimal performance.
5.7 K-Song Function
- Connect a 6.5mm microphone to the MIC input on the front panel.
- Use the ECHO, MIC+, and MIC- buttons on the remote control to adjust the microphone's reverb and volume levels.
5.8 EQ Sound Effects

Figure 5.4: DSP and 3D Sound Effects
- Press the EQ button on the remote control to switch between different sound effects: Normal, 3D, Enhanced Bass, 3D+Enhanced Bass.
- The built-in DSP chip creates a lossless stereo sound field, enhancing your listening experience.
5.9 Bypass Function
The Bypass function allows simultaneous output of any wired input to multiple audio devices, such as RCA outputs, 3.5mm headphone output, and Bluetooth transmission (if enabled).
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or aerosol sprays.
- Environment: Keep the device away from water, moisture, direct sunlight, and extreme temperatures. Ensure adequate ventilation around the unit.
- Storage: When not in use for extended periods, disconnect the power adapter and store the device in a cool, dry place.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound output | Incorrect input mode selected Volume too low Cables not connected properly Output device (speakers/headphones) not working | Verify the correct input mode is selected (indicator light). Increase the volume on the DA310B and your output device. Check all audio cables and ensure they are securely connected. Test your speakers/headphones with another audio source. |
| Bluetooth pairing fails | DA310B not in Bluetooth reception mode Device too far away Interference | Ensure the DA310B is in BT reception mode (BR indicator). Move your Bluetooth device closer to the DA310B. Try re-matching by long pressing the Bluetooth transmission button on the remote. Avoid other strong wireless signals. |
| U disk not playing | Incorrect file format U disk capacity too large U disk not formatted as FAT32 Bluetooth transmission active | Ensure audio files are MP3, WAV, WMA, APE, or FLAC. U disk capacity should not exceed 128GB. Format the U disk to FAT32. Turn off Bluetooth transmission when playing high bit rate audio from U disk. |
| Remote control not working | Batteries are dead or inserted incorrectly Obstruction between remote and device Remote control reception window (IR) is blocked | Replace batteries and ensure correct polarity. Remove any objects blocking the line of sight. Ensure the IR window on the front panel is clear. |
| Sound distortion or noise | Poor cable connection Source audio quality Interference | Check all cable connections for looseness. Test with a different audio source to rule out source quality issues. Move the device away from other electronic equipment that might cause interference. |
8. Specifications

Figure 8.1: Product Parameters
| Feature | Specification |
|---|---|
| Brand | AYINO |
| Model | DA310B |
| Shell Material | Aluminum alloy |
| Bluetooth Version | V5.3 |
| Input Modes | Bluetooth, Coaxial, Optical, U disk, PC-USB, AUX, 6.5mm Microphone |
| Output Modes | Bluetooth Transmission, AUX (Headphone), RCA (L/R) |
| Bluetooth Protocol | A2DP/AVRCP/AAC/SBC |
| Bluetooth Distance | Within 15 meters (up to 20 meters with external antenna) |
| Optical & Coaxial Input Sampling Rate | 192KHz 24Bit |
| USB Sound Card Input | 48KHz (DVD sound quality), drive-free, plug and play, supports mobile OTG |
| Signal-to-Noise Ratio (SNR) | ≥ 105dB |
| Frequency Response | 20Hz~20Khz |
| Sound Modes (EQ) | Normal, 3D, Enhanced Bass, 3D+Enhanced Bass (also Pop, Rock, Jazz, Classical, Natural) |
| Headphone Amplifier Output | 215mW@16Ω, 200mW@32Ω (0.005% THD+N) |
| Power Supply | DC 5V/1A |
| Product Dimensions (L*W*H) | 113 * 63 * 27mm |
| Product Weight | 143.5g |
9. User Tips
- Always ensure all cables are securely connected before powering on the device to prevent unexpected issues.
- For the best wireless range, ensure the Bluetooth antenna is properly installed and unobstructed.
- When using the U disk playback feature, consider turning off Bluetooth transmission if you experience any audio quality issues, especially with high bit rate files.
- Experiment with the different EQ sound effects to find the one that best suits your audio content and personal preference.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your original point of purchase or the manufacturer directly. Keep your purchase receipt as proof of purchase.
11. Product Video Overview
This video provides a visual overview of the AYINO DA310B unit, showcasing its design and various ports.