1. Introduction
The Staniot SecCube 3 H320-WiFi is a smart security alarm system designed to protect your home with ease. Featuring a minimalist design and powerful functions, it integrates seamlessly into your smart home ecosystem. This manual provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your SecCube 3 system.

2. Product Overview
Main Unit (SecCube 3 H320-WiFi)
The SecCube 3 main unit is a compact, cube-shaped device that serves as the central hub for your security system. It features a built-in siren and various control interfaces.

- Security Light: Indicates system status.
- Security Button: Multi-function button for arming/disarming and emergency.
- RFID Sensing Area: For quick arm/disarm using RFID cards.
- WiFi Status Indicator: Shows network connection status.
- Speaker/Siren: Emits alarm sounds and doorbell melodies.
- Power Switch: To turn the device on/off.
- USB Type-C: Power input (DC5V 1.0A).
- WiFi Pairing Button: For connecting to your wireless network.
Key Features
- Multi-function Security Button: Press once for 'Away' or 'Home' arming. Long press for 2 seconds to trigger or silence the alarm (configurable in APP).
- RFID Card/Tags: Quick arm/disarm by touching the RFID sensing area. Supports up to 10 cards (125KHz, 4100/4200 protocol).
- User-Friendly Design: Easy operation for all family members, including elderly and children, without needing a mobile phone for basic functions.
- Built-in Battery: 1000mAh lithium battery provides over 12 hours of standby time during power outages.
- OTA Online Upgrade: Continuous firmware updates for improved functionality and bug fixes.
- 18 Doorbell Melodies: Choose from various melodies when paired with a doorbell button.
- APP Remote Control: Full control and customization via the Tuya Smart Life APP.
- Accessory Support: Supports up to 96 wireless accessories including sirens, smoke detectors, water leak detectors, gas detectors, motion sensors, and keypads.
- Voice Assistant Compatibility: Works with Amazon Alexa and Google Assistant for voice commands (PIN code required for disarming via voice, preset in the respective APP).
3. Package Contents
A typical Staniot SecCube 3 H320-WiFi kit includes:
- SecCube 3 H320-WiFi Main Unit
- USB Type-C Power Cable
- Power Adapter (e.g., US Plug, EU Plug, UK Plug, AU Plug depending on selection)
- Wireless Remote Controls (quantity may vary by kit)
- RFID Tags (quantity may vary by kit)
- Door/Window Sensors (quantity may vary by kit)
- PIR Motion Sensors (quantity may vary by kit)
- User Manual (this document)
4. Setup Guide
4.1 Powering On the Main Unit
- Connect the provided USB Type-C power cable to the SecCube 3 main unit.
- Plug the power adapter into a standard wall outlet.
- Flip the power switch on the back of the unit to the 'ON' position. The WiFi status indicator will light up.
4.2 APP Installation and Pairing
- Download the Tuya Smart Life APP from your smartphone's app store (iOS or Android).
- Register or log in to your Tuya Smart Life account.
- In the APP, tap '+' to add a new device.
- Select 'Security & Video Surveillance' > 'Alarm (Wi-Fi)'.
- Follow the on-screen instructions to connect the SecCube 3 to your home Wi-Fi network. You may need to press the Wi-Fi pairing button on the back of the unit to enter pairing mode.
4.3 Adding Accessories
To add sensors, remote controls, or RFID cards:
- Ensure the SecCube 3 main unit is powered on and connected to the APP.
- In the Tuya Smart Life APP, navigate to the SecCube 3 device settings.
- Select 'Accessories' or 'Sensors' (exact wording may vary).
- Follow the APP's instructions to put the accessory into pairing mode and add it to the system.

5. Operating Instructions
5.1 Arming and Disarming the System
The SecCube 3 offers multiple ways to arm and disarm your security system:
- Using the Security Button (on main unit):

Multi-function Security Button operation. - Short Press: Toggles between 'Away' arm mode and 'Home' arm mode.
- Long Press (2 seconds): Triggers the system alarm or silences an active alarm. This function can be enabled/disabled in the APP.
- Using RFID Card/Tags:

RFID Card/Tags for quick arm/disarm. - First Touch: Activates 'Away' arm mode.
- Second Touch: Disarms the system.
- Using Wireless Remote Control:
Video demonstrating basic settings and operation of the Staniot SecCube 3 Alarm System, including remote control usage. Press the corresponding buttons on your remote control for arming, disarming, or triggering an SOS alarm.
- Using Mobile APP: Open the Tuya Smart Life APP and use the virtual controls to arm or disarm the system remotely.
5.2 Door/Window Detection

- System Disarmed: If a paired door/window sensor is triggered (e.g., door opens), the system will emit a chime sound.
- System Armed: If a paired door/window sensor is triggered, the system will sound an alarm.
- Arming with Open Door/Window: If you attempt to arm the system while a door or window with a sensor is open, the APP will send a notification.
5.3 Doorbell Function

When a paired doorbell button is pressed, the SecCube 3 main unit will play one of 18 selectable doorbell melodies. You can choose your preferred melody through the Tuya Smart Life APP.
5.4 Voice Control (Alexa & Google Assistant)

Integrate your SecCube 3 with Amazon Alexa or Google Assistant for convenient voice control. Link your Tuya Smart Life account within the Alexa or Google Home app. You can then use voice commands to arm or disarm your system. Note that a PIN code is required for disarming via voice, which is set within the Alexa/Google APP.
6. Maintenance
- Battery Management: The built-in 1000mAh lithium battery provides backup power. Ensure the main unit is regularly connected to power to keep the battery charged. The system will provide a low battery alarm when necessary.
- Cleaning: Use a soft, dry cloth to clean the exterior of the SecCube 3 main unit and accessories. Avoid using harsh chemicals or abrasive materials.
- Firmware Updates: The system supports OTA (Over-The-Air) online upgrades. Periodically check the Tuya Smart Life APP for available firmware updates to ensure optimal performance and access to new features.
7. Troubleshooting
- No Power: Check if the USB Type-C cable is securely connected and the power adapter is plugged into a working outlet. Ensure the power switch is in the 'ON' position.
- No Wi-Fi Connection: Verify your Wi-Fi network is active and the password is correct. Try restarting your router and the SecCube 3 unit. Re-attempt the Wi-Fi pairing process via the APP.
- Sensor Not Triggering: Check the battery in the sensor. Ensure the sensor is correctly paired with the main unit and placed within range. Verify proper alignment for door/window sensors.
- Alarm Not Sounding: Check the volume settings in the APP. Ensure the built-in siren is enabled. If using an external wireless siren, verify its power and pairing status.
- RFID Not Working: Ensure the RFID card/tag is correctly registered in the system. Touch the card firmly to the RFID sensing area.
- APP Issues: If the APP is not responding or showing incorrect status, try closing and reopening the app. Ensure your smartphone has a stable internet connection. If problems persist, try reinstalling the Tuya Smart Life APP.
8. Specifications

| Attribute | Value |
|---|---|
| Model Number | SecCube 3 H320-WiFi |
| Brand Name | staniot |
| Kit Configuration | Door/Window Sensor (varies by kit) |
| Size | 80x80x80mm |
| Communication Interface | Wireless |
| Arming Type | RFID Card |
| Video Interface | Yes |
| Display | No |
| Password Keyboard | Yes |
| Origin | Mainland China |
| Smart Home Platform | Tuya |
| Alarm Type | The Alarm, Apps Control |
| Power (W) | DC5V 1.0A USB Type-C |
| Certification | CE, RoHS |
| Built-in Battery | 1000mAh lithium battery |
| Built-in Siren | Yes |
| Wireless Parameters | 433MHz, eV1527 |
| WiFi Standard | IEEE802.11b/g/n 2.4GHz |
| Zone Number | 96 |
| Output Number | 96 |
| Alarm Panel Standby time | 10 hours (typical, up to 12h+) |
| Working Temperature | -10°C ~ +50°C |
| Relative Humidity | < 95% (no condensation) |
9. User Tips
- Wi-Fi Connection: The SecCube 3 uses a WiFi connection for smart features and APP control. Ensure your home Wi-Fi network is 2.4GHz for compatibility.
- Sensor Placement: For optimal security, place door/window sensors on all entry points and motion sensors in high-traffic areas. Test sensor functionality after installation.
- Voice Control PIN: Remember that a PIN code is required when disarming the system via Alexa or Google Assistant. This is a security feature to prevent unauthorized disarming.
- Battery Life: While the built-in battery provides backup, it's best to keep the main unit plugged in to ensure continuous operation and full functionality.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the Staniot Official Store or the retailer from whom you purchased the product. Keep your purchase receipt as proof of purchase.