lemorele TC92

Contents

Lemorele TC92 9-in-1 USB-C Hub Instruction Manual

Model: TC92

1. Introduction

The Lemorele TC92 9-in-1 USB-C Hub is a versatile docking station designed to expand the connectivity of your USB-C enabled devices, including laptops, tablets, and smartphones. This hub provides a comprehensive solution for connecting various peripherals, external displays, and storage devices, enhancing your productivity and multimedia experience.

Key features include 4K@30Hz HDMI output, 100W Power Delivery (PD) for charging, multiple high-speed USB-A and USB-C data ports, and integrated SD/TF card readers. It is a plug-and-play device, requiring no additional drivers for most operating systems.

Lemorele TC92 9-in-1 USB-C Hub with port list
Figure 1: Lemorele TC92 9-in-1 USB-C Hub highlighting its features.

This image displays the hub and lists its 9-in-1 capabilities: 1* HDMI 4K@30Hz, 3* USB-A 3.0, 1* USB-A 2.0, 1* USB-C 3.0, 1* SD, 1* TF, 1* USB-C PD 100W.

2. Product Overview

The Lemorele TC92 hub integrates nine essential ports into a compact design. Refer to the diagram below for a visual representation of the ports.

Diagram of Lemorele TC92 9-in-1 USB-C Hub showing port layout
Figure 2: Lemorele TC92 9-in-1 USB-C Hub Port Layout

This diagram illustrates the various ports available on the hub, including USB-A 2.0, USB-A 3.0, SD & TF card slots, USB-C 3.0 data port, 4K@30Hz HDMI port, and PD 100W USB-C power input.

2.1 Port Introduction

  • USB-C Power Input (PD 100W): Supports up to 100W power delivery, allowing connected devices to charge your laptop while using the hub.
  • USB-C Data Transfer Port (USB-C 3.0): Supports high-speed data transfer, suitable for connecting external hard drives and other USB-C devices.
  • HDMI Port (4K@30Hz): Supports 4K high-definition display output, ideal for connecting to TVs, projectors, or monitors.
  • USB 3.0 Ports (3x): Supports data transfer rates of up to 5 Gbps, perfect for connecting USB drives, external hard drives, and more.
  • USB 2.0 Port (1x): Supports data transfer rates of up to 480 Mbps, suitable for connecting peripherals like keyboards, mice, and printers.
  • SD/TF Card Slot (1x SD, 1x TF): Enables quick reading of storage card data, ideal for photographers and designers.

Note: The model you purchased may not have all ports available. Please refer to the corresponding ports for your purchased device model. This manual describes the 9-in-1 TC92 model.

3. Setup and Connection

3.1 Initial Connection

  1. Connect the integrated USB-C cable of the Lemorele TC92 hub to a compatible USB-C port on your laptop, tablet, or smartphone.
  2. Ensure your device's USB-C port supports audio and video output, data transfer, and PD power delivery functions for full hub functionality.
  3. The hub is plug-and-play and generally does not require manual driver installation.

3.2 Power Delivery (PD)

For stable operation and to charge your host device, connect a USB-C power adapter to the hub's PD 100W USB-C input port. The hub itself requires at least 13W of power to operate. It is recommended to use a higher wattage PD power adapter (preferably up to 100W) to ensure sufficient power for both the hub and your laptop.

USB-C Hub connected to a laptop with 100W PD fast charging
Figure 3: 100W PD Fast Charging via the USB-C Hub

This image demonstrates the hub providing 100W Power Delivery to a connected laptop, with 87W output to the laptop and 13W consumed by the hub.

3.3 Display Connection (HDMI)

Connect an HDMI cable from your monitor or projector to the HDMI port on the hub. Ensure your laptop's USB-C port supports audio and video output.

Laptop connected to an external monitor via HDMI through the USB-C Hub, showing extend and mirror modes
Figure 4: HDMI 4K@30Hz Output Supporting Extend and Mirror Modes

This image shows a laptop connected to an external 4K monitor via the hub, illustrating support for both extended and mirrored display modes.

3.3.1 How to Use Windows Mirroring and Extended Display

  1. Press WIN + P on your keyboard.
  2. Select your desired display mode:
    • PC screen only: Displays only on your laptop screen.
    • Duplicate: Mirrors your laptop screen to the external display.
    • Extend: Extends your desktop across both displays.
    • Second screen only: Displays only on the external screen.
  3. Alternatively, go to "System Settings" > "System" > "Display" to configure multiple displays.

3.3.2 How to Use macOS Mirroring and Extended Display

  1. Go to "System Settings" (or "System Preferences" on older macOS versions).
  2. Select "Displays".
  3. In the Displays settings, you can arrange your displays, choose resolutions, and select between "Mirror Displays" (duplicate) or "Use as separate display" (extend).

3.4 Data Transfer Ports (USB-A, USB-C Data)

Connect your USB devices such as flash drives, external hard drives, keyboards, mice, or printers to the available USB-A 3.0, USB-A 2.0, or USB-C 3.0 data ports.

USB-C Hub connected to a laptop with multiple USB devices, showing 1GB file transfer in 3 seconds
Figure 5: High-Speed Data Transfer via USB 3.0

This image illustrates the speed advantage of USB 3.0 (5Gbps) over USB 2.0 (480Mbps), enabling a 1GB file transfer in approximately 3 seconds.

3.5 Card Reader (SD/TF)

Insert your SD or TF (MicroSD) cards into the corresponding slots on the hub to access data directly. This is ideal for transferring photos and videos from cameras or other devices.

USB-C Hub with SD/TF card reader in use, connected to a laptop
Figure 6: SD/TF Card Reader Functionality

This image shows an SD card and a TF card inserted into the hub, connected to a laptop, facilitating direct file access.

4. Operating Instructions

4.1 General Operation

  • Connect the hub to your host device.
  • Connect external devices (monitor, USB drives, card readers, power adapter) to the appropriate ports on the hub.
  • The hub will automatically detect and configure connected devices.

4.2 Display Modes

The HDMI port supports both extended and mirror display modes. Refer to section 3.3 for specific instructions on configuring these modes for Windows and macOS.

4.3 Data Transfer

Utilize the USB 3.0 ports for high-speed data transfer (up to 5Gbps) with compatible devices. USB 2.0 ports are suitable for lower-speed peripherals. The USB-C data port also offers high-speed data transfer for USB-C storage devices.

4.4 Charging

When a PD power adapter is connected to the hub's PD port, it will pass through power to charge your host device. Ensure the power adapter provides sufficient wattage (up to 100W) for optimal charging and hub operation.

5. Care and Maintenance

  • Environmental Conditions: Do not expose the device to humid or high-temperature environments for extended periods to avoid damage.
  • Cable Management: To prolong the device lifespan, avoid frequently plugging and unplugging cables unnecessarily.
  • Cleaning: Use a soft, dry cloth to clean the hub. Avoid liquid cleaners or abrasive materials.
  • Storage: When not in use, store the hub in a cool, dry place away from direct sunlight.

6. Troubleshooting Guide

Display Issues

Q: Why is there no display when connecting to an HDMI monitor?
A: When connecting an HDMI monitor through a USB-C HUB, the USB-C port on the laptop must support audio and video output. Please ensure your laptop's USB-C port supports this capability.
Q: The laptop's USB-C port supports audio and video output, so why is there no display when connecting to an HDMI monitor?
A: Please try disconnecting the HUB from the laptop, shutting down the laptop, and then pressing and holding the power button for 40 seconds to discharge any static electricity. After that, reconnect the HUB and try again.
Q: Why can't a MacBook achieve triple-screen extended display when connected to multiple HDMI monitors?
A: macOS does not support MST (Multi-Stream Transport) technology. As a result, only mirroring (AAA) or duplicating the same extended display (ABB) is supported, and triple-screen extended mode is not supported.
Q: Why can't I set a higher resolution when connecting multiple HDMI monitors?
A: On Windows systems, when connecting multiple HDMI monitors, the maximum supported resolution is 1080P @60Hz. If only one HDMI monitor is connected, the resolution depends on the capabilities of both the laptop and the monitor, with a maximum of 4K @30Hz. On macOS, the maximum supported resolution is 4K @30Hz.
Q: Does the HUB's HDMI port support other refresh rates?
A: By default, it supports 1080P @60Hz and 4K @30Hz resolutions. When connecting a single HDMI monitor, the resolution display depends on the laptop's USB-C port and the monitor's supported resolution (e.g., 2560x1440P @144Hz).

Connectivity Issues

Q: My laptop doesn't have a USB-C port. Can I use a USB-A adapter?
A: No, using a USB-A adapter to connect the HUB will result in the HDMI and other ports being unable to output audio and video, causing the monitor and other devices to not function properly.
Q: Can I use a USB-C extension cable to connect the HUB?
A: Using a USB-C extension cable may weaken the signal, leading to some ports (such as HDMI) not displaying properly. It is not recommended to use a USB-C extension cable.
Q: Why is the external hard drive not recognized or does the connection unexpectedly drop when transferring data?
A: The external hard drive may draw more power than the laptop's USB-C port can supply, causing connection issues. It is recommended to use a PD power adapter connected to the HUB's USB-C PD port to ensure stable power supply and prevent connection interruptions.

Power and Charging Issues

Q: Why is there no charging indication when connecting the PD power adapter?
A: Please confirm whether your laptop's USB-C port supports PD charging functionality and check if the power adapter is connected properly. If the issue persists, it is recommended to try connecting a different PD power adapter to rule out compatibility issues with the PD charging protocol.
Q: Why does my laptop indicate slow charging when I connect the charger?
A: The HUB itself requires at least 13W of power to operate. It is recommended to use a higher wattage PD power adapter (preferably up to 100W). This ensures that there is sufficient power supplied to both the HUB and the laptop, avoiding slow charging issues.

Card Reader Issues

Q: Why can't the SD card be read?
A: Please check if the SD card is inserted correctly and ensure that the card's file format is compatible with the device.

General Questions

Q: Does the HUB require driver installation before use?
A: The HUB is a plug-and-play external device and generally does not require manual driver installation.

7. Specifications

Feature Detail
Model Number TC92
Brand Name lemorele
Interface Type USB Type-C
Ports 9 (3x USB 3.0, 1x USB 2.0, 1x USB-C Data, 1x HDMI, 1x SD, 1x TF, 1x USB-C PD)
HDMI Output 4K@30Hz
Power Delivery (PD) Up to 100W
USB Standard USB 3.0 (5Gbps), USB 2.0 (480Mbps)
Card Reader SD, TF (MicroSD)
Certification CE
Package Dimensions (L x W x H) 29 cm x 13 cm x 3 cm
Package Weight 0.099 kg
Origin Mainland China

8. User Tips

  • Power Adapter: For optimal performance and stable connections, especially when using external hard drives or charging your laptop, always connect a high-wattage (preferably 100W) PD power adapter to the hub's PD port.
  • Compatibility: Ensure your host device's USB-C port supports video output (DisplayPort Alternate Mode), data transfer, and Power Delivery for full functionality of the hub. The hub is compatible with devices like MacBook Air/Pro and iPad Pro M1/M2.
  • Mobile Devices: The hub can extend connectivity for compatible mobile phones, allowing for external display and peripheral connections.
  • Direct Connection: Avoid using USB-A to USB-C adapters or USB-C extension cables with the hub, as this can lead to reduced functionality or signal degradation.

9. Warranty and Support

If you require assistance with your Lemorele TC92 USB-C Hub, please contact our technical support team.

9.1 Customer Support

You can reach us at any time by following these steps:

  1. Log in to your account and go to "Your Orders."
  2. Select "Problem with Order" next to the relevant order.
  3. Send us a message through "Contact Seller."
  4. If you encounter issues during use, please refer to the troubleshooting guide or contact technical support via support@lemorele.com for further assistance.

9.2 Additional Resources

A user manual in PDF format is also available for download. You can typically find this on the product page or by contacting support. The PDF can be found at: Lemorele TC92 User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.