ZUIDID 9-Inch Car Radio Fascia Frame

1. Introduction

This manual provides detailed instructions for the installation and care of your ZUIDID 9-inch car radio fascia frame. This product is designed to facilitate the installation of a 9-inch Android stereo, MP5 player, or other 2DIN head unit into specific vehicle models, ensuring a seamless and integrated look within your car's dashboard.

Important Note: This product is a fascia frame and, depending on the selected option, may include a wiring harness. It does NOT include the navigation player or head unit itself.

2. Product Overview

2.1 Package Contents

• Fascia Frame: 1x 9-inch black plastic fascia frame.
• Wiring Harness (Optional, if 'Whole Set' is purchased): 1x compatible wiring harness for car radio installation.
• Mounting Screws: A set of complimentary screws for installation.

Figure 1: Fascia Frame and Wiring Harness (Whole Set)

Figure 2: Fascia Frame Only

Figure 3: Complimentary Mounting Screws

2.2 Key Features

• Compatibility: Specifically designed for Citroen Jumpy 3, Peugeot Expert, and Toyota Proace models manufactured between 2016 and 2021.
• Size: Accommodates standard 9-inch car navigation players and 2DIN head units.
• Material: Durable plastic construction.
• Color: Black, to match most vehicle interiors.
• Integration: Provides a factory-like finish for aftermarket head unit installations.

3. Installation Guide

Professional installation is recommended. Ensure your vehicle's ignition is off and the battery is disconnected before beginning installation to prevent electrical damage or injury.

3.1 Pre-Installation Checks

1. Verify Compatibility: Confirm that your vehicle is a Citroen Jumpy 3, Peugeot Expert, or Toyota Proace (2016-2021).
2. Head Unit Dimensions: Ensure your 9-inch head unit's dimensions are compatible with the fascia frame. The frame is designed for units with approximate dimensions: Top Width 229mm, Bottom Width 219mm, Height 131mm. Minor variations (1-2mm) are within normal tolerance.

Figure 4: Compatible Head Unit Dimensions

Warning: Some car navigation players may not be compatible. After-sales service may not be available for compatibility issues arising from incompatible head units.

3.2 Installation Steps

1. Remove Original Head Unit: Carefully remove the existing car radio or blanking plate from your vehicle's dashboard. Refer to your vehicle's service manual for specific instructions on dashboard disassembly.
2. Mount New Head Unit to Fascia Frame: Secure your new 9-inch Android stereo or MP5 player into the ZUIDID fascia frame using the provided complimentary screws. Ensure it is firmly seated and aligned.
3. Connect Wiring (if applicable): If your package includes a wiring harness, connect it to your new head unit and the vehicle's existing wiring loom. Ensure all connections are secure and correctly matched (e.g., power, ground, speaker, antenna, steering wheel controls if supported).
4. Install Fascia Frame Assembly: Insert the combined head unit and fascia frame assembly into the dashboard opening. Ensure all clips and mounting points align correctly. Gently press until the frame snaps securely into place.
5. Reassemble Dashboard: Reinstall any dashboard trim panels or components that were removed during the process.
6. Reconnect Battery and Test: Reconnect your vehicle's battery. Turn on the ignition and test the functionality of your new head unit and all associated features.

Figure 5: Example of Installed Fascia Frame with Head Unit

4. Operation

The fascia frame itself is a passive component and does not require operational instructions. Its function is to provide a secure and aesthetically pleasing mount for your 9-inch head unit. Refer to the user manual of your specific head unit for operational instructions.

5. Maintenance

• Cleaning: Use a soft, damp cloth to wipe the fascia frame. Avoid abrasive cleaners or solvents that could damage the plastic finish.
• Inspection: Periodically check that the fascia frame remains securely fitted in the dashboard and that there are no loose connections if a wiring harness was installed.

6. Troubleshooting

• Fascia Frame Does Not Fit:
  • Double-check your vehicle's make, model, and year against the product's compatibility list.
  • Ensure all original dashboard components were removed correctly.
  • Verify that the 9-inch head unit you are trying to install fits within the frame's internal dimensions (refer to Section 3.1).
• Head Unit Not Functioning After Installation:
  • Check all wiring connections for proper seating and correct polarity.
  • Ensure the vehicle's battery is fully reconnected and charged.
  • Consult your head unit's manual for specific troubleshooting steps.
• Loose Fit/Rattling:
  • Ensure all mounting clips on the fascia frame are intact and properly engaged with the dashboard.
  • Verify that the head unit is securely fastened to the fascia frame with screws.

7. User Tips

• Always verify the exact model and year of your vehicle before purchasing to ensure perfect fitment.
• Measure your aftermarket head unit carefully to confirm it matches the 9-inch opening and internal dimensions of this fascia frame.
• If you are unsure about the installation process, consider seeking assistance from a professional car audio installer.

8. Specifications

9. Warranty and Support

For any questions regarding the ZUIDID 9-inch car radio fascia frame, please contact your retailer or the manufacturer's customer support. Please retain your proof of purchase for warranty claims. Warranty terms typically cover manufacturing defects. Damage due to improper installation, misuse, or incompatible components may not be covered.