1. Introduction
The HamGeek DSP-01 is a Software Defined Radio (SDR) based on a DSP digital demodulation architecture. It features a 192kHz wide spectrogram and waterfall display, offering high dynamic range reception with 16-bit sampling. This device supports CW, AM, SSB (LSB/USB), WFM, and FM demodulation functions.
Constructed with an all-aluminum alloy CNC shell and a 4.3-inch 800x480 resolution high-brightness IPS LCD display, the DSP-01 maintains a compact and portable design.
Attention: This product is designed for hobbyist use and is not a professional instrument or radio. Its receiving performance may be slightly different from professional-grade equipment. Users should have a basic understanding of SDR technical implementations and potential functional limitations.
2. Package Contents
Verify that all items listed below are included in your package:
- 1 x HamGeek DSP-01 Radio
- 1 x USB Type-C Data Cable
- 1 x BNC Telescopic Antenna
- 1 x User Manual (this document)

3. Product Overview
The DSP-01 features a robust aluminum alloy casing and a clear IPS LCD for display. Key components and interfaces are detailed below.

3.1 Controls and Ports
- Display: 4.3-inch IPS 800x480 resistive touch screen.
- Rotary Encoder: Used for navigation and parameter adjustment.
- Type-C Charging Port: For charging the internal battery.
- ON/OFF Switch: Power control for the device.
- 5V Out Port: USB Type-A port for external power output.
- Light Button: Activates a small light.
- Antenna Interface: BNC male connector for antenna input (50Ω impedance).
- Audio Jack: 3.5mm port supporting standard earphones and CTIA (American Standard) interface earphones.



4. Specifications
4.1 General Parameters
- Display Technology: 4.3" IPS 800x480; DC dimming bright LCD
- Control Method: Resistive touch screen + rotary encoder
- Frequency Range: 100kHz ~ 149MHz
- Working Modes: CW, AM, SSB (LSB/USB), WFM, FM broadcast stereo (requires headphones)
- Step Frequency: 1Hz/10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz
- Spectral Bandwidth: 192kHz, 128kHz, 64kHz, FFT real-time spectrum display
- Antenna Interface: BNC male connector, input impedance 50Ω, maximum input power -20dBm
- Reference Crystal: TCXO 26MHz ±0.5ppm
- Audio Interface: Supports ordinary 3.5mm earphones and CTIA (American Standard) interface earphones
- Speaker Power: Maximum 3W, 4Ω multimedia speaker
- Charging Port: USB Type-C, 5.0V/2A
- Current Consumption: Approximately 250mA at 5V
- Battery Capacity: 5000mAh/3.7V, 18.5Wh, lithium battery
- Usage Time: Approximately 10-12 hours (depending on volume and brightness settings)
- Channel Saving: Preset 99 channels with station name, frequency, and demodulation mode
- Dimensions (without protrusions): 136 x 74 x 22mm (LxWxH)
- Main Unit Weight: Approximately 310g
4.2 Receiver Parameters
- RF Front-end Power Amplifier Gain: Fixed 20dB
- Circuit Type: Zero-IF (ZIF)
- Side-band Suppression: ≥55dB
4.3 Frequency and Demodulation Details
| Frequency | Sensitivity | Demodulation method |
|---|---|---|
| MW: 520k ~ 1710kHz | 10uV, SINAD 12dB | AM |
| SW: 3M ~ 30MHz | 1uV, SINAD 12dB 0.25uV, SINAD 12dB | AM SSB/CW |
| FM: 87M ~ 108MHz | 1.5uV, SINAD 12dB 2.0uV, SINAD 20dB | WFM WFM |
| AIR: 118M ~ 137MHz | 2uV, SINAD 12dB | AM |
Test conditions: 50 ohm input, preamp 20dB on, AGC on.

4.4 Supported Frequency Bands and Coverage
| Radio frequency allocation | Frequency starting point | Frequency stop | Common modulation methods |
|---|---|---|---|
| Longwave | 100,000 | 300,000 | AM |
| Medium-wave | 300,000 | 1,800,000 | |
| HAM Radio 160 metres | 1,800,000 | 2,000,000 | |
| Shortwave | 2,000,000 | 3,000,000 | |
| HAM Radio 80 metres | 3,000,000 | 3,500,000 | LSB |
| Shortwave | 3,500,000 | 3,900,000 | |
| HAM Radio 60 metres | 3,900,000 | 5,351,500 | |
| Shortwave | 5,356,500 | 7,000,000 | |
| HAM Radio 40 metres | 7,000,000 | 7,200,000 | USB |
| Shortwave | 7,200,000 | 10,100,000 | |
| HAM Radio 30 metres | 10,100,000 | 10,150,000 | |
| Shortwave | 10,150,000 | 14,000,000 | |
| HAM Radio 20 metres | 14,000,000 | 14,350,000 | |
| Shortwave | 14,350,000 | 18,068,000 | |
| HAM Radio 17 metres | 18,068,000 | 18,168,000 | |
| Shortwave | 18,168,000 | 21,000,000 | |
| HAM Radio 15 metres | 21,000,000 | 21,450,000 | |
| Shortwave | 21,450,000 | 24,890,000 | |
| HAM Radio 12 metres | 24,890,000 | 24,990,000 | |
| Shortwave | 24,990,000 | 28,000,000 | |
| HAM Radio 10 metres | 28,000,000 | 29,700,000 | |
| VHF Band | 30,000,000 | 50,000,000 | |
| HAM Radio 6 metres | 50,000,000 | 54,000,000 | WFM |
| VHF Band | 54,000,000 | 64,000,000 | |
| FM broadcast | 64,000,000 | 108,000,000 | |
| Airband Navigation | 108,000,000 | 118,000,000 | AM |
| Airband Voice | 118,000,000 | 137,000,000 | |
| VHF Band | 137,000,000 | 144,000,000 | |
| HAM Radio 2 metres | 144,000,000 | 148,000,000 | |
| HAM Radio | 148,000,000 | 149,000,000 |

5. Setup
5.1 Initial Charging
Before first use, fully charge the device using the provided USB Type-C cable and a 5.0V/2A power adapter (not included). The charging status is indicated by LED lights:
| Status | Red light | Blue light | |
|---|---|---|---|
| Charge | Charging | Flash | Off |
| Charged | On | Off | |
| Discharge | Discharging | Off | On |
| Low-voltage | Off | Flash | |

5.2 Antenna Connection
Connect the provided BNC telescopic antenna to the BNC male connector on the side of the radio. Ensure a secure connection for optimal reception.
For medium wave (MW) reception, it is recommended to use a dedicated medium wave loop antenna (not included) for improved listening quality.
6. Operating Instructions
The DSP-01 is controlled via its resistive touch screen and rotary encoder. The encoder allows adjustment of 12 primary parameters, while 5 additional parameters are displayed automatically.
6.1 Encoder Selectable Parameters
- Channel Selection: Select channels from 1-99.
- Frequency Setting: Adjust frequency from 100kHz to 149MHz, with a minimum step of 1Hz.
- Speaker Volume (SPK): Adjust from 0~35dB in 1dB steps. "OFF" mutes the speaker.
- Headphone Volume (EAR): Adjust from 0~35dB in 1dB steps. "OFF" mutes headphones.
- Demodulation Mode: Select between CW, LSB, USB, AM, WFM, STE (FM broadcast stereo), I/Q.
- AGC Settings: Choose Automatic Gain Control settings: OFF, SLOW, MID, FAST.
- Reference Level (REF): Adjustable from -99 to 99dB.
- Backlight Brightness (LCD): Adjustable from 1%~99%.
- IF GAIN: Adjustable from -12 to 67dB in 1dB steps.
- Spectrum Style Setting: Switch between green fill, green line, blue fill, and white line display styles.
- Spectrum Bandwidth Setting: Switch between RF spectrum (192kHz, 128kHz, 64kHz) and audio spectrum (64kHz) displays.
- Waterfall Chart Setting: Switch between waterfall chart and time domain waveform chart (1x, 8x, 64x amplitude).

6.2 Automatically Displayed Parameters
These parameters are displayed on the screen and are not directly adjustable via the encoder:
- Battery level display.
- Date and time settings.
- Station information display (preset station name).
- Current spectrum bandwidth display.
- Real-time display of antenna port input power (POWER).
7. Maintenance
To ensure the longevity and optimal performance of your HamGeek DSP-01, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the device. Avoid using abrasive cleaners or solvents, which can damage the casing and screen.
- Storage: Store the radio in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
- Battery Care: For extended storage, ensure the battery is charged to approximately 50-70% to preserve its lifespan. Avoid fully discharging the battery for long periods.
- Antenna: When not in use, retract the telescopic antenna to prevent damage.
8. Troubleshooting
Here are some common issues and recommendations:
- Interference from Strong Broadcasting Stations: Due to the SDR architecture, strong local broadcasting stations may cause phenomena like "tandem" or "mirror" stations. This is a characteristic of SDRs and not a defect. Try adjusting your location or using a more selective antenna if possible.
- Poor Medium Wave (MW) Reception: The antenna interface has an impedance of 50Ω. For better MW reception, consider connecting a dedicated medium wave loop antenna (sold separately).
- Loud Headphone Volume: Always check the Headphone Volume (EAR) setting before using earphones to avoid discomfort or potential hearing damage from excessive volume.
- No Power: Ensure the device is fully charged. Refer to the "Initial Charging" section for LED indicators.
- Display Not Responding: If the resistive touch screen is unresponsive, try restarting the device. Ensure your fingers are clean and dry when operating the touch screen.
9. User Tips
Based on user feedback and common questions, here are some helpful tips:
- The DSP-01 is capable of receiving VOLMET broadcasts, including those from Singapore, depending on local propagation conditions and antenna setup.
- Experiment with different antenna types for various frequency bands to optimize reception.
- Utilize the spectrogram and waterfall display to visually identify signals and fine-tune your reception.
10. Technical Details: Tayloe Quadrature Product Detector
The HamGeek DSP-01 utilizes the Tayloe Quadrature Product Detector method for frequency mixing. This approach, combined with a Si5351 clock generator producing two quadrature square wave signals, enables an ultra-low noise Zero-IF (ZIF) receiver. The resulting I/Q signals are processed by a CODEC and an MCU, where DSP algorithms perform demodulation and display functions.
For a detailed technical explanation of the Tayloe Quadrature Product Detector, including its unique properties, basic detector operation, detection bandwidth, and noise analysis, please refer to the original paper: "Ultra Low Noise, High Performance, Zero IF Quadrature Product Detector and Preamplifier" by Dan Tayloe.
10.1 Receiver Block Diagram

The block diagram illustrates the signal flow: RF input from the antenna passes through a Low Noise Amplifier (LNA), then to a mixer. The mixer output is filtered by a Low Pass Filter (LPF) before being processed by a CODEC (Analog-to-Digital Converter and Digital-to-Analog Converter). The Microcontroller Unit (MCU) performs DSP algorithms, and the output is sent to the LCD and audio amplifier (PA) for speaker output.
11. Warranty and Support
For warranty information and technical support, please refer to the seller's policies or contact the point of purchase. Keep your proof of purchase for any warranty claims.