1. Introduction
The Fosi Audio BT20A Pro is a new generation 2.0 channel Bluetooth power amplifier designed to deliver high-fidelity audio for your home theater system. Featuring the high-performance Texas Instruments TPA3255 chip, it provides up to 300W x 2 output power into a 4-ohm load, ensuring clear transients and realistic sounds with low distortion. Its compact and sleek aluminum alloy design integrates Bluetooth 5.0 for seamless wireless connectivity and offers precise bass and treble controls for personalized sound. This amplifier is an ideal choice for enhancing your audio experience with passive speakers and active subwoofers.
2. Package Contents
Please check the package carefully for the following items:
- BT20A Pro Bluetooth Amplifier x 1
- User Manual x 1
- Bluetooth Antenna x 1
- Power Adapter (32V/5A or 48V/5A depending on option) x 1
3. Product Overview
Front Panel Controls
- Power Indicator: Illuminates when the unit is powered on.
- Power Switch: Toggles the amplifier on/off.
- Treble Control: Adjusts the high-frequency response.
- Bass Control: Adjusts the low-frequency response.
- Volume Control: Adjusts the overall output volume. This knob can also be pressed and held to clear Bluetooth connections.
Rear Panel Connections
- RCA Input (LINE IN): Connects to audio sources via RCA cables (e.g., CD player, turntable with pre-amp, TV).
- PRE OUT: 3.5mm pre-out for connecting to an active subwoofer or another amplifier.
- Passive Speaker Output (OUTPUT): Connects to passive speakers using banana plugs or bare speaker wire.
- Power Input (DC24-48V): Connects to the provided power adapter.
- Bluetooth Antenna (BT): Connect the included Bluetooth antenna for wireless connectivity.
4. Setup
Follow these steps to set up your Fosi Audio BT20A Pro amplifier:
- Connect Bluetooth Antenna: Screw the included Bluetooth antenna into the "BT" port on the rear panel.
- Connect Speakers: Connect your passive speakers to the "OUTPUT" terminals using banana plugs or bare speaker wire. Ensure correct polarity (red to red, black to black).
- Connect Audio Source (RCA): If using a wired source, connect your audio device (e.g., CD player, turntable with built-in or external pre-amp) to the "LINE IN" RCA inputs using RCA cables.
- Connect Active Subwoofer (Optional): If using an active subwoofer or another amplifier, connect it to the "PRE OUT" 3.5mm jack.
- Connect Power: Connect the power adapter to the "DC24-48V" input on the rear panel, then plug the adapter into a wall outlet.
- Power On: Flip the power switch on the front panel to turn on the amplifier. The power indicator light will illuminate.
5. Operation
Bluetooth Connection
- Ensure the Bluetooth antenna is properly attached.
- Turn on the BT20A Pro.
- On your mobile device (phone, tablet, etc.), go to Bluetooth settings and search for "Fosi Audio BT20A PRO".
- Select the amplifier to pair. The power indicator light will turn blue when connected.
- Start playing audio from your device.
RCA Wired Playback
- Connect your audio source to the "LINE IN" RCA inputs.
- Ensure no Bluetooth device is actively connected. The amplifier will automatically prioritize the wired input if both are present, or you may need to disconnect Bluetooth manually.
- Start playing audio from your wired source.
Adjusting Sound
- Use the Volume Control knob to adjust the overall loudness.
- Use the Treble Control knob to fine-tune high frequencies.
- Use the Bass Control knob to adjust low frequencies.
6. Specifications
| Feature | Detail |
|---|---|
| Model | BT20A Pro |
| Power Amplifier Chip | TPA3255 |
| Op-Amp Chip | NE5532 (Replaceable) |
| Channels | 2 (2.0) |
| Amplifier Class | D |
| Material | Aluminum Alloy Case and Knob |
| Control Method | Push button, Rotary knobs |
| Audio Input | RCA, Bluetooth 5.0 |
| Audio Output | Speaker Output (Banana Speaker Jacks), 3.5mm Pre Out |
| Bluetooth Version | 5.0 |
| Bluetooth Transmission Distance | Up to 50Ft (without obstruction) |
| DC Input Range | DC24V-48V |
| Power Adapter (Included) | 32V 5A (or 48V 5A depending on option) |
| Terminating Impedances | 2-8Ω |
| Frequency Response Range | 20Hz-20kHz (±1.2dB) |
| SNR | ≥108dB |
| THD | ≤0.005% |
| Input Sensitivity | ≤775mV |
| Unit Dimensions (L x W x H) | 166.0 mm (6.5in) x 105.0 mm (4.1in) x 35.0 mm (1.4in) |
| Unit Weight | 547g (1.2lbs) |
| Certifications | CE, FCC ID: 2A4LX-FOSMP |
Power Output Table
| Power Supply | Speaker Impedance | Rated Output Power | Max Output Power |
|---|---|---|---|
| 24V 4.5A | 4 Ω | 60 W | 70 W |
| 6 Ω | 40 W | 50 W | |
| 8 Ω | 30 W | 35 W | |
| 32V 5A | 4 Ω | 100 W | 125 W |
| 6 Ω | 70 W | 85 W | |
| 8 Ω | 50 W | 65 W | |
| 48V 5A | 4 Ω | 230 W | 260 W |
| 6 Ω | 155 W | 170 W | |
| 8 Ω | 115 W | 130 W | |
| 48V 10A | 4 Ω | 280 W | 300 W |
| 6 Ω | 190 W | 200 W | |
| 8 Ω | 140 W | 150 W |
7. Troubleshooting
- No Sound:
- Check if the power indicator is on.
- Ensure all cables (power, speaker, audio source) are securely connected.
- Verify the audio source is playing and its volume is up.
- If using Bluetooth, ensure the amplifier is paired and connected to your device. Try clearing the Bluetooth connection by pressing and holding the volume knob.
- If using RCA, ensure the Bluetooth is disconnected as wired input might be prioritized.
- Bluetooth Connection Issues:
- Ensure the Bluetooth antenna is properly attached.
- Make sure the amplifier is within the 50ft transmission range without obstructions.
- Try forgetting the device on your phone/tablet and re-pairing.
- Press and hold the volume knob on the amplifier to clear any existing Bluetooth connections, then try pairing again.
Press and hold the volume knob to clear a Bluetooth connection. - Distorted Sound / Noise:
- Check speaker wire connections for loose strands or short circuits.
- Reduce the volume on both the amplifier and the audio source.
- Ensure the audio source is not sending an over-amplified signal.
- Test with a different audio source or cables to isolate the problem.
- Amplifier Gets Warm:
- It is normal for the casing to get slightly warm during extended use, especially at higher volumes. Ensure adequate ventilation around the unit.
- Turntable Connection:
- The BT20A Pro accepts RCA line-level input. If your turntable does not have a built-in phono pre-amplifier, you will need an external phono pre-amplifier between the turntable and the BT20A Pro's RCA input.
8. User Tips
- The BT20A Pro is highly versatile and works well with a variety of passive speakers, including older models, bringing them back to life with clear and powerful sound.
- Consider using a 48V power supply for maximum power output, especially with demanding speakers, though the included 32V supply is often sufficient for most home setups.
- The Bluetooth connection is generally stable and has minimal delay, making it excellent for wireless streaming from desktops or mobile devices.
- The compact size makes it suitable for various placements, from a home office desk to a larger living room.
- The replaceable NE5532 op-amp chip allows for customization of the sound signature if you wish to experiment with different audio characteristics.
- While the unit is designed for efficiency, ensure good ventilation, especially during long listening sessions at high volumes, as the casing may become warm.
9. Warranty & Support
Fosi Audio provides a 24-month warranty for all products from the date of shipment. This warranty covers manufacturing defects but excludes items damaged due to misuse or improper handling after receipt.
For any inquiries or support, please contact Fosi Audio customer service. They offer well-trained and professional sales and after-sale services.
Please note that the power adapter type (e.g., EU plug) is typically determined by your shipping location. If you have specific requirements, please verify with the seller before purchase.