Introduction
Thank you for choosing the Neewer DMW-BLK22 Replacement Battery and Dual Channel USB Charger Set. This manual provides essential information for the safe and efficient use of your new battery and charger. Please read it thoroughly before use and keep it for future reference.
This set includes two 2400mAh DMW-BLK22 replacement battery packs and a versatile dual-channel USB charger, designed to provide reliable power for your Panasonic Lumix cameras.
Safety Information and Warnings
WARNING:
- Do not disassemble, crush, puncture, or short circuit the battery.
- Do not expose the battery to fire or excessive heat.
- Replace the battery only with the correct type to avoid explosion.
- Dispose of used batteries according to local regulations.
- Keep out of reach of children.
- Avoid electric shocks: Ensure the charger is connected to a suitable power source.
- Prevent overvoltage: Use only compatible power adapters.
- Do not use the charger or batteries if they are damaged.
For detailed safety and disposal instructions, please refer to the official user manual PDF: User manual (PDF).
Package Contents
- 2 x Neewer DMW-BLK22 2400mAh Batteries
- 1 x Neewer Dual Channel USB Charger (Model: DL-BLK22)
- 1 x USB Type C Cable
Specifications
| Component | Specification |
|---|---|
| Battery Model | DMW-BLK22 |
| Battery Capacity | 2400mAh (7.2V, 17.28Wh) |
| Charger Model | DL-BLK22 |
| Charger Input | Micro USB 5V 2.1A (Min), USB Type C 5V 2.1A (Min) |
| Charger Output (1x Battery) | 8.4V 700mAh |
| Charger Output (2x Batteries) | 8.4V 500mAh |
| Charger Dimensions | 3.5" x 2.2" x 0.8" / 9 x 5.6 x 2.2cm |
| Charger Weight | 1.58oz / 45g |
| Battery Dimensions | 2.2" x 1.6" x 0.8" / 5.7 x 4 x 2.1cm |
| Battery Weight (Single) | 1.94oz / 80g |
| Compatibility | Panasonic Lumix DC-S5, DC-S5 II, DC-S5 IIX, GH5 II, GH6, S5II, S5IIX, S5M2, S5M2X, GH5M2, and other cameras using DMW-BLK22 batteries. Compatible with Panasonic original chargers and batteries. |
Setup and Installation
The Neewer DMW-BLK22 batteries are designed for seamless integration with compatible Panasonic Lumix cameras. The charger is a dual-channel unit for efficient charging.
Installing Batteries in Camera:
- Ensure your camera is powered off.
- Open the battery compartment cover on your camera.
- Insert the DMW-BLK22 battery into the compartment, ensuring the contacts align correctly.
- Close the battery compartment cover securely.


Operation
Charging the Batteries:
The dual-channel USB charger allows you to charge one or two DMW-BLK22 batteries simultaneously.
- Insert one or two DMW-BLK22 batteries into the charging slots of the dual-channel charger. Ensure they are seated correctly.
- Connect the provided USB Type C cable to the charger's USB Type C port or use a Micro USB cable with the Micro USB port.
- Connect the other end of the USB cable to a suitable USB power source (e.g., wall adapter, power bank, car charger).
- The LCD screen on the charger will display the charging status for each battery in real-time.
- Charging two batteries simultaneously at 8.4V 500mAh output will fully charge them in approximately 5 hours.


Using Batteries with Camera:
Once fully charged, insert the batteries into your compatible Panasonic Lumix camera as described in the "Setup and Installation" section. The camera's LCD screen will accurately display the battery percentage due to the fully decoded chip technology.
Maintenance
- Keep batteries and charger clean and dry. Wipe with a soft, dry cloth if necessary.
- Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
- Do not store fully charged batteries for extended periods. It is recommended to store them at approximately 50% charge if not used for a long time.
- Regularly inspect the charger and cables for any signs of damage. Discontinue use if damage is found.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Batteries not charging | Loose cable connection, faulty power source, damaged charger/cable, incorrect battery insertion. | Check all connections. Try a different USB power source. Ensure batteries are inserted correctly. Inspect charger and cable for damage. |
| Battery percentage not displayed on camera | Camera incompatibility (unlikely for listed models), battery not fully seated. | Ensure the battery is fully inserted. Verify your camera model is listed as compatible. |
| Charger LCD not lighting up | No power supply, damaged charger. | Ensure the charger is connected to a working USB power source. Try a different cable and power source. If still unresponsive, the charger may be faulty. |
| Batteries drain quickly | Old batteries (unlikely for new product), extreme temperatures, high power consumption settings on camera. | Ensure batteries are fully charged. Avoid using in extremely cold or hot environments. Adjust camera settings (e.g., screen brightness, video resolution) to conserve power. |
User Tips
- Always carry a fully charged spare battery, especially for long shooting sessions or travel.
- Utilize the dual-channel charger to charge both batteries simultaneously overnight for maximum readiness.
- The compact size of the charger and batteries makes them ideal for travel; pack them in your camera bag for on-the-go charging.

Video Overview
Watch this video for a quick overview of the Neewer DMW-BLK22 Battery and Charger Set's features and benefits.
Video: Promotional video showcasing the features and benefits of the Neewer DMW-BLK22 battery and charger set.
Disposal
When the product reaches the end of its life, please dispose of it responsibly. Batteries contain materials that should not be discarded with general household waste. Follow local regulations for battery recycling and disposal. Contact your local waste management authority for information on proper disposal facilities.