1. Product Overview
The K&F CONCEPT T255A3+BH-28L is a versatile travel aluminium camera tripod designed for photographers and videographers. It features a unique transverse center column, a 360° rotatable ball head, and can be converted into a monopod. Its compact and lightweight design makes it ideal for various shooting scenarios.

Figure 1: K&F CONCEPT T255A3+BH-28L Tripod with transverse center column and ball head.
1.1 Package Contents
Upon unpacking, please ensure all the following items are present:
- 1 x T255A3 Tripod with BH-28L Ball Head
- 1 x Tripod Carrying Bag
- 1 x Instruction Manual
- 1 x Hex Key (for adjustments)

Figure 2: Included accessories in the tripod package.
2. Setup and Assembly
2.1 Extending and Folding the Tripod Legs
- To Extend: Release the quick-release flip-locks on each leg section. Pull the leg sections outwards to the desired length. Securely close the flip-locks to lock the legs in place.
- To Fold: Open the quick-release flip-locks. Push the leg sections inwards until fully retracted. Close the flip-locks.
Video 1: Demonstration of tripod leg extension and locking mechanisms.
2.2 Adjusting Leg Angles
The tripod legs can be adjusted to three different opening angles for stability on various terrains. Press the angle adjustment tab at the top of each leg and move the leg to the desired angle, then release the tab to lock it.
2.3 Attaching the Camera to the Ball Head
- Ensure the quick shoe plate is securely attached to your camera's tripod mount.
- Loosen the quick shoe plate lock on the ball head.
- Slide the quick shoe plate with your camera into the ball head receiver.
- Tighten the quick shoe plate lock to secure the camera.

Figure 3: Detailed view of the BH-28L Ball Head and quick shoe plate.
3. Operating the Tripod
3.1 Transverse Center Column Operation
The central column can be moved from 0 to 180 degrees and rotated 360° horizontally for panorama shooting or overhead shots.
- Loosen the center column locking knob.
- Pull the center column upwards.
- Tilt the center column to the desired horizontal position.
- Tighten the locking knob to secure the column.

Figure 4: Transverse center column in horizontal position, showing 360° rotation capability.

Figure 5: Quick deployment of the transverse center column.
3.2 360° Panoramic Shooting
The BH-28L ball head allows for smooth 360° panoramic rotation. Loosen the panoramic lock knob on the ball head base, rotate to the desired angle, and then tighten the knob.

Figure 6: Tripod set up for 360° panoramic shooting.
3.3 Low-Angle and Inverted Shooting
For low-angle shots, spread the tripod legs to their widest angle. The transverse center column can also be inverted for extremely low-angle or macro photography.

Figure 7: Tripod configured for low-angle creative shooting.

Figure 8: Tripod configured for inverted shooting.
3.4 Monopod Conversion
One of the tripod legs can be detached and combined with the center column to form a monopod.
- Unscrew the leg with the foam grip from the tripod body.
- Unscrew the center column from the tripod body.
- Attach the detached leg to the bottom of the center column.
- Attach the ball head to the top of the assembled monopod.

Figure 9: Detaching a tripod leg for monopod use.
3.5 Multi-functional Accessory Extension
The transverse center column can also be used to mount additional accessories like microphones, LED lights, or smartphone holders, expanding your shooting capabilities.

Figure 10: Example of multi-functional accessory extension.
4. Maintenance
Proper maintenance ensures the longevity and optimal performance of your tripod.
- Cleaning: Wipe down the tripod with a soft, dry cloth after each use. For stubborn dirt, use a slightly damp cloth and mild soap, then dry thoroughly. Avoid harsh chemicals.
- Lubrication: Periodically check leg locks and ball head mechanisms. If they feel stiff, apply a small amount of silicone-based lubricant. Do not over-lubricate.
- Storage: Store the tripod in its carrying bag in a dry, cool place away from direct sunlight and extreme temperatures.
- Inspection: Regularly inspect all screws, knobs, and leg locks for tightness. Use the provided hex key to tighten any loose fasteners.
5. Troubleshooting
Here are some common issues and their solutions:
- Tripod is unstable:
- Ensure all leg sections are fully extended and their flip-locks are securely closed.
- Adjust the leg angles to match the terrain for maximum stability.
- Verify the center column is fully lowered or securely locked if extended.
- Leg locks are stiff or not holding:
- Clean any dirt or debris from the locking mechanisms.
- Apply a small amount of silicone lubricant to the moving parts.
- Ensure the flip-locks are fully engaged.
- Ball head is not holding position:
- Ensure the main locking knob on the ball head is fully tightened.
- Check that the quick shoe plate is correctly seated and locked.
- Verify your camera's weight does not exceed the tripod's maximum load capacity (10kg / 22lbs).
6. Specifications

Figure 11: Key specifications of the T255A3+BH-28L Tripod.
| Feature | Specification |
|---|---|
| Model Number | T255A3+BH-28L |
| Material | Aluminum Alloy |
| Max Extended Length | 1860mm (73.23 inches) |
| Folded Length | 430mm (16.93 inches) |
| Weight | 1.87 kg (4.12 lbs) |
| Load Capacity | 10 kg (22 lbs) |
| Leg Sections | 5 |
| Tube Diameter | 2.5 cm (0.98 inches) |
| Ball Head Diameter | 2.8 cm (1.1 inches) |
| Ball Head Height | 8 cm (3.15 inches) |
| Ball Head Bottom Interface | 3/8" |
| Use For | Action Cameras, 360° Video Camera, Point & Shoot Cameras, Special Camera, DSLRs, Smartphones, Mirrorless System Camera |

Figure 12: Tripod height variations.
7. Warranty and Support
The K&F CONCEPT T255A3+BH-28L Tripod comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For warranty claims or technical support, please contact K&F CONCEPT customer service through their official website or the retailer where the product was purchased.
Additionally, the product is eligible for free returns within 90 days of purchase, subject to the retailer's return policy.
8. User Tips
- Always ensure all locking mechanisms are securely tightened before mounting your camera or adjusting the tripod's position to prevent accidental drops.
- When using the transverse center column, distribute the weight evenly to maintain balance, especially with heavier camera setups.
- For maximum stability in windy conditions or on uneven surfaces, extend the lowest leg sections first and use the widest leg angle.
- Utilize the monopod feature for quick, portable shooting when a full tripod setup is not feasible or necessary.