1. Product Overview
The TUNGFULL Multifunction PCB Test Fixture is a versatile tool designed for functional testing (FCT) and in-circuit testing (ICT) of printed circuit boards (PCBA). It features a robust construction from Bakelite, acrylic, and aluminum, ensuring stability and durability. The fixture is available in various sizes to accommodate different PCB dimensions and offers a stroke of 60mm for comprehensive testing.
2. Safety Information
WARNING: Strictly follow these safety norms to avoid personal injury and property loss. Do not overload or misuse the product.
2.1 General Safety Precautions
- Power Connection: If using with powered components, ensure power adapters match the product's rated voltage. Avoid fast-charging devices unless explicitly marked as compatible to prevent circuit overload, short circuits, fires, or electric shocks.
- Environmental Requirements: Do not place the product in high-temperature environments (>60°C), direct sunlight, near ovens, humid areas (rainy days, bathrooms), dusty conditions, or strong magnetic fields. Such conditions may cause malfunctions or performance degradation.
- Child Supervision: This product is not a toy. Children under 12 must be supervised by adults when near the product. Prevent accidental ingestion of small parts and contact with power interfaces.
- Prohibition of Modification: Do not disassemble, modify, or repair the product yourself. Unauthorized disassembly may void the warranty.
- Abnormal Handling: If the product exhibits overheating, abnormal noise, peculiar odors, smoke, or electric leakage, immediately disconnect power (if applicable), stop use, keep it away from flammables, and do not attempt to disassemble it yourself.
2.2 Operational Safety
- Wear appropriate protective gear, such as gloves and goggles, during operation to prevent scratches or debris hazards.
- Do not use the product as a hammer or pry bar to avoid breakage.
- Adults should operate the device with full concentration and avoid use under the influence of alcohol or when fatigued.
3. Setup and Assembly
The TUNGFULL PCB Test Fixture is designed for straightforward assembly. Please ensure all components are present before beginning.
3.1 Component Identification
Your package should contain:
- Assembled main frame (base and vertical supports)
- 1 set of three embryonic plates (three pieces of clear acrylic)
- Quick clip mechanism
- Screw bag with necessary fasteners and copper inserts
3.2 Assembly Steps
- Attach Embryonic Plates: Carefully place the three embryonic plates onto the designated supports within the main frame. Ensure they are level and securely seated.
- Install Quick Clip: Position the quick clip mechanism onto the upper part of the frame. The quick clip is designed with positioning protrusions for accurate and rapid installation. Refer to Figure 5 for visual guidance.
- Secure Bearing Seat: Install the bearing seat. Similar to the quick clip, it features positioning protrusions for precise placement and quick changeover. Refer to Figure 6 for visual guidance.
- Fasten Components: Use the screws and copper inserts from the screw bag to secure all components. The quick release screws and copper inserts are designed for quick changeover and durability.
- Wiring (if applicable): The fixture is equipped with multiple wire passing holes in the straight bottom box for concealed and concise wiring of test probes or other electronic connections.
4. Operating Instructions
4.1 Basic Operation
- Power On/Off (if applicable): If your setup includes powered components, press the power button as indicated on the product. The indicator light will turn on/flash for power on, and turn off for power off.
- PCB Placement: Carefully place the Printed Circuit Board (PCB) onto the embryonic plates. Ensure it is aligned correctly with your test probes or setup.
- Secure PCB: Use the quick clamp mechanism to gently but firmly secure the PCB in place. The fixture provides a stroke of 60mm, allowing for sufficient movement during testing.
- Function Control: Operate any associated test equipment via its buttons, touch panels, or remote controls. Refer to the specific product markings for button functions. Avoid excessive force when pressing buttons to prevent damage.
- Adjustments: The fixture allows for easy adjustments to accommodate different PCB sizes and testing requirements. Utilize the adjustable components for optimal positioning.
5. Maintenance
5.1 Daily Maintenance
- Cleaning: Disconnect any power first. Wipe the fixture with a dry, soft cloth. Avoid corrosive liquids (e.g., alcohol, disinfectant) to prevent damage to the casing or internal components.
- Storage: Clean the product thoroughly before long-term storage. Store it in a dry, well-ventilated place, away from direct sunlight and extreme temperatures. Avoid placing heavy objects on top of the fixture to prevent extrusion or impact damage.
- Inspection: Regularly check for any damaged parts, loose screws, or wear and tear on the quick clamp and bearing seat. If any damage is found, cease use immediately and address the issue.
6. Troubleshooting
6.1 Common Issues and Solutions
- Fixture Instability: Ensure all screws are tightened and components are properly seated. Check for any missing parts that might affect stability.
- Difficulty with PCB Placement/Removal: Verify that the quick clamp and bearing seat are correctly installed and adjusted for the PCB size. Ensure no debris is obstructing movement.
- Damaged Components: If any part of the fixture appears damaged, discontinue use. Do not attempt to repair with non-original parts, as this may compromise functionality and safety.
7. Specifications
Material: Bakelite + Acrylic + Aluminum
Type: Power Tool Parts (Test Fixture)
Stroke: 60mm
7.1 Model Dimensions and Weight
| Number (Model) | Plate Size (E*F mm) | Plate Thickness (mm) | Bottom Height (D mm) | Product Size (A*B*C mm) | Weight (KG) |
|---|---|---|---|---|---|
| V75-50 | 95*70 | 8 | 60 | 143*138*338 | 3 |
| V100-70 | 120*90 | 8 | 60 | 168*158*338 | 3 |
| V125-90 | 145*110 | 8 | 60 | 193*178*338 | 3 |
| V150-110 | 170*130 | 8 | 60 | 218*198*338 | 4 |
| V175-130 | 195*150 | 10 | 60 | 243*218*338 | 4 |
| V200-150 | 220*170 | 10 | 60 | 268*238*338 | 5 |
| V225-170 | 245*190 | 10 | 60 | 293*258*338 | 5 |
| V250-190 | 270*210 | 10 | 60 | 318*278*338 | 6 |
8. Warranty and Support
8.1 Disclaimer
The manufacturer is not liable for product malfunctions caused by:
- Force majeure events (e.g., earthquakes, fires, natural disasters).
- Improper use, overload, or third-party damage.
- Cross-border transportation accidents.
8.2 Voiding Warranty
The warranty will be void if the product is:
- Disassembled or modified.
- Repaired with non-original parts.
- Improperly repaired.
No liability is assumed for damage resulting from such actions.
8.3 Additional Resources
For further item guides and documents, please refer to the official PDF user manual: View User Manual (PDF).
9. User Tips
- Check Components: Upon receiving your test fixture, carefully inspect all components and ensure no screws or parts are missing before beginning assembly.
- Careful Assembly: Take your time during assembly to ensure all parts are correctly aligned and tightened. This will prevent instability and ensure optimal performance.
- Compatibility: Always confirm compatibility of any special supporting parts or extended accessories before purchase and use.
10. Frequently Asked Questions (FAQ)
- Q: What materials is the test fixture made from?
- A: The fixture is constructed from Bakelite, acrylic, and aluminum for durability and stability.
- Q: Can I use this fixture for different PCB sizes?
- A: Yes, the fixture is available in various models designed to accommodate different PCB dimensions. Please refer to the specifications table to choose the appropriate model.
- Q: What is the maximum stroke of the test fixture?
- A: The test fixture has a maximum stroke of 60mm.
- Q: Is it possible to quickly change between different test setups?
- A: Yes, the design incorporates quick changeover features for the quick clip and bearing seat, allowing for efficient setup changes.