1. Product Overview
The Flipsky Antispark Switch Pro V3.0 is designed to prevent damaging sparks when connecting a battery to an Electronic Speed Controller (ESC) in high-power applications. It features an aluminum PCB/case for improved heat dissipation and robust performance.

Figure 1: Flipsky Antispark Switch Pro V3.0 with LED button connected.
Video 1: Product overview of the Flipsky Antispark Switch Pro.
2. Safety Precautions
- Always ensure the switch is in the OFF position before connecting or disconnecting any power sources.
- Do NOT power on the switch without the LED button connected. The LED button is essential for proper operation and safety.
- Ensure all connections are secure and properly insulated to prevent short circuits.
- Operate within the specified voltage and current limits to avoid damage to the switch and connected components.
3. Setup and Wiring
Follow these steps to correctly install and wire your Antispark Switch Pro V3.0:
- Connect the LED Button: The LED button is typically pre-inserted. Ensure it is securely connected to the designated port on the switch.
- Connect to Battery: Connect the 'IN+' and 'IN-' terminals of the Antispark Switch to the positive and negative terminals of your battery, respectively.
- Connect to ESC: Connect the 'OUT+' and 'OUT-' terminals of the Antispark Switch to the positive and negative power input terminals of your Electronic Speed Controller (ESC).
- Connect ESC to Motor: Connect the ESC to your motor as per the ESC manufacturer's instructions.

Figure 2: Wiring Diagram for Antispark Switch Pro V3.0.

Figure 3: Detail of LED button connection.
Reminder: The LED button must be connected for the switch to function correctly and safely. Ensure the switch is OFF before applying power.
4. Operating Instructions
The Antispark Switch Pro V3.0 is designed for simple operation:
- Turning On: Press the LED button once to turn on the power. The LED will illuminate, indicating the switch is active and power is flowing to the ESC.
- Turning Off: Press the LED button once again to turn off the power. The LED will turn off, indicating the power supply has been cut.
This switch effectively mitigates the spark that typically occurs when connecting high-voltage batteries to ESCs, protecting your connectors and electronics from wear and damage.
5. Maintenance
The Antispark Switch Pro V3.0 is designed for durability and requires minimal maintenance. However, consider the following for optimal performance and longevity:
- Heat Management: For continuous operation at or near the maximum current (100A), especially in enclosed spaces, it is recommended to ensure adequate airflow or consider increasing the heat sink size to prevent overheating.
- Connection Integrity: Periodically inspect all wiring connections for signs of wear, corrosion, or looseness. Secure any loose connections.
- Cleanliness: Keep the switch free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning.
6. Troubleshooting
If you encounter issues with your Antispark Switch Pro V3.0, consider the following:
- Switch does not turn on/off: Ensure the LED button is correctly and securely connected. The switch will not operate without it.
- No power to ESC/Motor: Check all wiring connections from the battery to the switch and from the switch to the ESC. Verify battery charge.
- Excessive heat: If the switch becomes excessively hot during operation, reduce the load or improve cooling. Consider adding a larger heat sink if operating at high continuous currents.
If problems persist, consult the manufacturer's support resources.
7. Specifications
| Feature | Specification |
|---|---|
| Model | Antispark Switch Pro V3.0 |
| Mosfets | HYG015N10NS1TA |
| LED Button Diameter | 16mm |
| Voltage Range | 3S-14S (12V-60V) |
| Max Current | 200A (with bigger heat sink) |
| Continuous Current (with Aluminum PCB/case V3.0) | 100A |
| Continuous Current (with heatsink) | 60A |
| Burst Current | 800A (theoretical) |
| PCB Thickness | 6 layer * 3oz copper = 18oz copper |
| Dimensions (Pro V3.0 with heatsink and heat shrink) | 42.2mm * 33mm * 26.6mm (12AWG Wire) |
| Dimensions (With Aluminum PCB/case V3.0) | 72mm * 37mm * 16.2mm (8AWG Wire) |
| Material | Composite Material |
| Origin | Mainland China |
| Use | Vehicles & Remote Control Toys |

Figure 4: Dimensions of the Antispark Switch Pro V3.0 with Aluminum PCB/Case.

Figure 5: Dimensions of the Antispark Switch Pro V3.0 with heatsink and heat shrink.
8. User Tips
- The Antispark Switch is effective in preventing sparks during battery connection, which helps prolong the life of your connectors and components.
- Some users may choose to customize or modify the installation (e.g., sealing connections with sealant) for specific applications or environmental conditions.

Figure 6: Example of connections sealed with sealant.
9. Warranty and Support
Specific warranty information is not provided in the product details. For warranty claims or technical support, please contact the seller or manufacturer directly. Ensure you retain your proof of purchase for any support inquiries.