1. Product Overview
The REVASRI Laser Range Finder is a versatile optical instrument designed for precise distance measurement in various outdoor activities, including golf, hunting, and construction. It features advanced laser technology, multiple measurement modes, and a clear optical display to enhance accuracy and user experience.

Key Components
- Objective Lens: The front lens through which light enters the device.
- Eyepiece: The lens you look through to view the target. Features manual focusing.
- Power On/Measure Button: Activates the device and initiates distance measurements.
- Switching M/Y Button: Toggles between meters (M) and yards (Y) units.
- Angle Switch (e switch): A physical switch to enable/disable slope compensation.
- USB Charging Port: For recharging the built-in lithium battery.
2. Setup and Charging
Initial Charging
The REVASRI Laser Range Finder comes with a built-in rechargeable lithium battery. Before first use, ensure the device is fully charged.
- Locate the USB-C charging port on the device.
- Connect the provided USB-C cable to the rangefinder and a compatible USB power source (e.g., computer, wall adapter).
- The charging indicator will show the charging status. Once fully charged, disconnect the cable.

Focus Adjustment
To ensure a clear view, adjust the eyepiece focus:
- Look through the eyepiece.
- Rotate the eyepiece ring clockwise or counter-clockwise until the display and target appear sharp and clear.
3. Operating Instructions
The REVASRI Laser Range Finder offers multiple modes for different applications. Press the Power On/Measure button to activate the device and initiate measurements.
Unit Switching (M/Yard)
To switch between meters (M) and yards (Y), press and hold both the Power On/Measure button and the Mode button (or the two buttons on top, depending on the model) for 3-5 seconds.
Measurement Modes

- Single Ranging Mode: Measures the straight-line distance to a single target.
- All-in-one Mode: Provides angle, height, and horizontal distance measurements simultaneously.
- Scan Mode: Allows continuous scanning of multiple targets to get distances quickly.
- Two-Point Height Measurement Mode: Measures the height between two points.
- Speed Measurement Mode: Calculates the speed of a moving object.
- Golf Mode: Specifically designed for golf, offering:
- Flagpole Lock with Vibration: The device vibrates to confirm when it has locked onto the flagpole, ignoring background objects.
- Slope Compensation: Automatically calculates the elevation difference and provides an adjusted distance for uphill or downhill shots.
- Angle Switch: Manually enable or disable the slope compensation feature as required by golf rules.
- Data Storage Function (NK-1000): Stores measurement data for later review.


4. Maintenance
- Cleaning Lenses: Use a soft, clean cloth specifically designed for optical lenses. Avoid abrasive materials that could scratch the lens.
- Storage: Store the rangefinder in its protective carrying case when not in use. Keep it in a dry, cool place away from direct sunlight and extreme temperatures.
- Battery Care: Recharge the battery regularly, even if not frequently used, to maintain battery health. Avoid fully discharging the battery for extended periods.
- General Care: Do not attempt to disassemble or repair the device yourself. Refer to professional service if needed.
5. Troubleshooting
- Device not powering on: Ensure the battery is charged. Connect to a USB power source and allow it to charge for at least 30 minutes before attempting to power on again.
- Inaccurate readings: Ensure the lenses are clean and free from smudges. Make sure there are no obstructions between the rangefinder and the target. Check that the correct measurement mode is selected for your application.
- Display unclear/blurry: Adjust the eyepiece focus ring until the display is sharp.
- Unit not switching (M/Y): Ensure you are pressing and holding both required buttons simultaneously for 3-5 seconds.
6. Specifications
| Attribute Name | Attribute Value |
|---|---|
| Battery Included | Yes |
| High-concerned chemical | None |
| Laser hazard level | Class 1 (<1mW) |
| Certification | CE,FCC,RoHS |
| Origin | Mainland China |
| Power Type | Rechargeable |
| Size | 9.6x3.4x6.7cm/3.78x1.34x2.64inch |
| Brand Name | REVASRI |
| Model Number | Golf and Hunting |
| Measurement Accuracy | 0.1M/Yard |
| Power Source | Rechargeable |
| Charge Mode | USB-C Rechargeable |
| Ranging Error | ±1m/yard |
| Unit | M/Yard switch |
| Ranging Scope | 5-600M/5-1000M |
| Laser Wavelength | 905 nm |
| Angle Ranging Scope | 90° |
| Angle Ranging Accuracy | 0.3° |
| Angle Display Resolution | 0.1° |
| Ranging Display Mode | Transmissive LCD display in the field of view |
| Telescope Magnification | 6X |
| Telescope Object Diameter | 24mm |
| Eyepiece Diameter | 13.2mm |
| Lens Quality | Multilayer coated |
| Working Temperature | -20~50℃ |
| Focusing Mode | Manual focusing eyepiece |
| Product Weight | 140g/4.94 ounce |
7. Warranty and Support
The REVASRI Laser Range Finder comes with a one-year warranty period. For any questions or issues, please contact REVASRI customer service.
After-sales Service Rules:
- The product is covered for non-artificial damage or damages not caused by improper operation.
- For quality problems, the buyer should contact REVASRI customer service and provide corresponding pictures or videos of the issue.
- Upon confirmation of quality problems, the seller will provide services or free replacement.
- Buyer product issues will be resolved.
The seller reserves the right of final interpretation. Consult customer service for details.
8. User Tips
- Always ensure a clear line of sight to your target for the most accurate readings.
- Practice using the different measurement modes to become familiar with their functions and optimize your usage for various scenarios.
- Regularly clean the objective and eyepiece lenses with a soft, lint-free cloth to maintain optical clarity.
- When using the slope compensation feature in golf, be aware of local tournament rules regarding its legality. Use the angle switch to disable it if necessary.





