1. Product Overview
This document provides essential information for the safe and efficient use of your new 19V AC adapter charger. This charger is designed to be compatible with the Mamibot EXVAC660 Platinum Robot Vacuum Cleaner and other devices requiring a 19V, 600mA power supply.
The charger features a built-in charging controller to optimize battery charging and includes a charge indicator light for easy monitoring.
Figure 1: Overall view of the 19V AC adapter charger with its cable and European plug.
2. Safety Information
- Read all instructions before use.
- Do not expose the charger to water or excessive moisture.
- Do not disassemble or modify the charger.
- Use only with compatible devices (19V, 600mA). Using with incompatible devices may cause damage or fire.
- Ensure the power outlet voltage matches the charger's input specifications (100-240V).
- Keep out of reach of children.
- Unplug the charger from the power outlet when not in use or during electrical storms.
3. Setup
- Inspect the Charger: Before first use, visually inspect the charger and its cable for any signs of damage. Do not use if damaged.
- Connect to Power Outlet: Plug the charger's AC plug into a standard wall power outlet (100-240V, 50/60Hz).
- Connect to Device: Insert the DC barrel connector of the charger cable into the charging port of your Mamibot EXVAC660 Platinum Robot Vacuum Cleaner or other compatible device. Ensure a secure connection.
Figure 2: Close-up of the DC barrel connector.
4. Operating Instructions
Once properly connected, the charger will begin supplying power to your device. This charger is equipped with a charging controller that intelligently reduces current as the battery charges, preventing overcharging and extending battery life.
- Charging Indicator: The charger features a built-in indicator light (bulb) that changes color to show the charging status:
- Red: Indicates the device is currently charging.
- Green: Indicates the device is fully charged or not connected to a device.
- Charging Time: Charging time will vary depending on the device's battery capacity and current charge level. Refer to your device's manual for specific charging times.
- Disconnection: Once charging is complete, disconnect the DC connector from your device, then unplug the charger from the wall outlet.
5. Maintenance
- Cleaning: Disconnect the charger from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior of the charger. Do not use liquid cleaners or solvents.
- Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures. Avoid wrapping the cable too tightly around the adapter to prevent damage.
- Cable Care: Do not pull on the cable to disconnect the charger. Always grasp the plug or connector firmly.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger not working / No indicator light | No power from outlet; Loose connection; Damaged charger. | Check power outlet with another device; Ensure all connections are secure; Inspect charger for damage. If damaged, discontinue use. |
| Device not charging | Loose connection; Device battery issue; Incompatible device. | Ensure DC connector is fully inserted; Verify device requires 19V 600mA; Consult device manual for battery troubleshooting. |
| Indicator light stays red (never turns green) | Device not fully charging; Faulty indicator. | Allow more time for charging; If problem persists, consult device manual or contact support. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Numbers | Yjs015f-1900600g, Xed-1906, GQ12-190060-AG |
| Input | 100-240V ~, 50/60Hz |
| Output | 19V 600mA (0.6A) |
| Type | Vacuum Cleaner Parts (AC Adapter) |
| Special Features | Equipped with Charging Controller, Red/Green Charge Indicator |
| Origin | Mainland China |
Figure 3: Charger label with detailed specifications.
8. Warranty and Support
This power supply comes with a 6-month warranty from the date of purchase. For warranty claims or technical support, please contact your retailer or the point of purchase. Ensure you retain your proof of purchase for warranty validation.