Douk Audio G4

Contents

Douk Audio G4 Mini Subwoofer / Full-Frequency Mono Channel Digital Amplifier User Manual

Model: G4

1. Introduction

The Douk Audio G4 is a versatile mono integrated Class D amplifier designed for HiFi home and desktop audio systems. It can function as either a full-frequency amplifier or a subwoofer amplifier, offering a maximum output of 100W. Its compact size and robust aluminum chassis make it an ideal choice for enhancing your audio experience.

Important Note: This is a mono amplifier. For stereo output, two or three units are required depending on your desired setup (e.g., two for 2.0 channel, three for 2.1 channel).

Video 1: Douk Audio G4 Product Showcase

2. Features

  • Versatile Functionality: The G4 can be configured as a full-frequency amplifier or a subwoofer amplifier using the B/M switch, allowing connection to various speaker types.
  • Flexible Input Options: Equipped with 3.5mm AUX and RCA inputs for compatibility with a wide range of audio devices.
  • Powerful Output: Utilizes 2PCS NE5532 op-amps and TI's TPA3116 chip, delivering up to 100W of power. Capable of driving passive 3-10 inch full-frequency speakers (10-200W) or 4-12 inch subwoofers (40-200W).
  • Enhanced Audio Quality: Features signal analysis and frequency processing before power amplification, resulting in purer low-frequency filtering and efficient power consumption.
  • Compact and Durable Design: Mini size with a fashionable and durable solid aluminum chassis, suitable for various home and desktop audio setups.

3. Specifications

AttributeValue
Brand NameDouk Audio
Model NumberG4
Channels1 (Mono)
Maximum Power Per Channel100 W
Audio Input3.5mm AUX / RCA
Audio OutputBanana Speaker Jacks
Peak Power300W
THD0.001%
SNR103dB
Speaker Impedance4-8Ω
Matched Full-Frequency/Crossover Speaker3-10 inch / 10-200W
Matched Subwoofer Speaker4-12 inch / 40-200W
Frequency Range (Subwoofer Mode)20-200Hz
Frequency Range (Full-Frequency Mode)20-20KHz
Working VoltageDC 12-24V (5.5mm (-) / 2.5mm (+))
Dimensions (L*W*H)105*85*30mm / 4.13*3.35*1.18in
Net Weight240g / 0.53lb
Package Weight445g / 0.98lb
CertificationCE

4. Packing List

  • 1x Douk Audio G4 Mono Amplifier
  • 1x 19V Power Supply
  • 1x User Manual
Packing list for Douk Audio G4 amplifier, showing the amplifier, power supply, and manual.

Image 1: Contents of the Douk Audio G4 package.

5. Setup Guide

5.1 Component Identification

Front panel of Douk Audio G4, showing Power Indicator and Power/Volume Knob.

Image 2: Front Panel Layout

Rear panel of Douk Audio G4, showing 3.5mm AUX input, RCA input, B/M switch, speaker output terminals, and DC 12-24V power input.

Image 3: Rear Panel Connections

5.2 Connecting Your Audio System

  1. Connect Audio Source: Use either the 3.5mm AUX input or the RCA input to connect your audio source (e.g., DAC, Preamp, Phone, MP3 player, TV, Blue-ray, PC/Mac/Computer).
  2. Connect Speakers: Connect your passive speaker(s) to the banana speaker jacks. Ensure correct polarity (+ to + and - to -).
    • For full-frequency or crossover speakers: 3-10 inch, 10-200W.
    • For subwoofers: 4-12 inch, 40-200W.
  3. Select Mode (B/M Switch): On the rear panel, set the B/M switch according to your speaker type:
    • 'B' (Subwoofer Mode): For connecting a subwoofer. Frequency range: 20-200Hz.
    • 'M' (Full-Frequency Mode): For connecting a full-range speaker. Frequency range: 20-20KHz.
  4. Connect Power: Connect the provided 19V power supply to the DC 12-24V input port on the rear panel.
Diagram showing how to build a stereo audio system using one or two G4 amplifiers with passive speakers and subwoofers.

Image 4: Stereo Audio System Configuration Examples

6. Operating Instructions

  1. Power On: Once all connections are secure, turn the Power/Volume Knob clockwise from the 'Min' position. The Power Indicator light will illuminate.
  2. Adjust Volume: Rotate the Power/Volume Knob to adjust the output volume to your desired level.
  3. Power Off: Turn the Power/Volume Knob counter-clockwise until it clicks into the 'Min' position and the Power Indicator light turns off.

7. Maintenance

  • Keep the amplifier in a dry, well-ventilated area, away from direct sunlight, heat sources, and moisture.
  • Clean the exterior with a soft, dry cloth. Do not use liquid cleaners or solvents.
  • Ensure all connections are secure and free from dust or corrosion.
  • Avoid placing heavy objects on top of the amplifier.

8. Troubleshooting

  • No Sound:
    • Check if the amplifier is powered on and the Power Indicator is lit.
    • Verify all audio input and speaker output cables are correctly connected and secure.
    • Ensure the volume knob is not at minimum.
    • Confirm the audio source is playing and its volume is adequate.
    • Check the B/M switch setting matches your speaker type.
  • Distorted Sound:
    • Reduce the volume from both the amplifier and the audio source.
    • Ensure speaker impedance matches the amplifier's requirements (4-8Ω).
    • Check for damaged cables or loose connections.
  • Humming/Noise:
    • Ensure all cables are properly shielded and away from power cables.
    • Try a different power outlet.
    • Disconnect input sources one by one to identify the source of the noise.
  • Amplifier Overheating:
    • Ensure adequate ventilation around the amplifier.
    • Do not block the ventilation holes.
    • Check if the connected speakers meet the specified power and impedance ratings.

9. User Tips

  • Speaker Compatibility: When connecting a passive subwoofer, ensure its impedance is within the 4-8 ohm range for optimal performance and to prevent damage to the amplifier.
  • Automatic Power On/Off: The amplifier may feature an automatic power-on function when a signal is detected and an automatic power-off function when the signal is interrupted. This can vary by specific firmware versions; observe your unit's behavior.
  • Stereo Setup: For a 2.0 stereo system, purchase two G4 units and set both to 'M' (Full-Frequency Mode), connecting one to the left channel speaker and the other to the right channel speaker. For a 2.1 system, use two G4s for stereo full-range speakers (set to 'M') and a third G4 for the subwoofer (set to 'B').

10. Warranty & Support

Douk Audio products are designed for reliability and performance. For any technical issues or questions not covered in this manual, please contact Douk Audio customer support through your purchase platform. Keep your purchase receipt as proof of purchase for warranty claims.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.