IRALAN XD-1003

Contents

IRALAN LED Ceiling Chandelier Instruction Manual

Model: XD-1003 | Brand: IRALAN

1. Product Overview

The IRALAN XD-1003 LED Ceiling Chandelier is a modern luxury lighting fixture designed for living rooms, dining rooms, kitchens, and bedrooms. It features a lotus-inspired design, integrated LED bulbs, and smart control capabilities including remote control and a mobile application via Bluetooth. This chandelier offers stepless dimming and adjustable color temperatures to suit various lighting needs and preferences.

IRALAN LED Ceiling Chandelier installed in a modern living room, emitting warm light.
The IRALAN LED Ceiling Chandelier in a living room setting.

2. Safety Information

  • Ensure the power supply is disconnected before installation, cleaning, or maintenance.
  • Installation should be performed by a qualified electrician or in accordance with local electrical codes.
  • Do not modify the product in any way not described in this manual.
  • Keep packaging materials out of reach of children.
  • This product is designed for indoor use only.

3. Assembly Instructions

The chandelier requires assembly. Please follow the steps carefully. Refer to the diagram below for visual guidance.

Detailed assembly instructions for the IRALAN LED Chandelier, showing 15 steps with diagrams.
Assembly diagram for the IRALAN LED Chandelier.
  1. Open the box and carefully remove all components.
  2. Place all components on a clean, flat surface to prevent damage.
  3. Assemble the short tubes to the panels. The short threaded end of the tubes should go into the panels (for 7 panels).
  4. Assemble the long tubes to the panels. The short threaded end of the tubes should go into the panels (for 3 panels).
  5. Attach the panels with long tubes to the middle part of the main plate.
  6. Secure these panels to the plate using nuts.
  7. Assemble the remaining 3 panels with long tubes to the plate.
  8. Assemble the panels with short tubes to the marginal part of the plate.
  9. Secure these panels to the plate using nuts.
  10. Fasten all assembled panels securely with the provided wrench.
  11. Connect all wires to the collector. Pay close attention to the correct direction; there is a minor ridge on each wire indicating the 'up' side.
  12. Assemble the flat-headed bolts to the cross with nuts, but do not fully tighten them yet.
  13. Position the cross, ensuring all bolts align with the four small holes on the plate. Then, remove the cross and fasten the nuts securely.
  14. Install the cross to the ceiling using sharp pointed screws and an electric drill. Ensure the flat-headed bolts remain stationary during this step.
  15. Lift the light fixture and align it with the installed cross. The four flat-headed bolts should pass through the plate, and then fasten them securely with the nuts as shown in the diagram.

4. Operating Instructions

This smart chandelier offers versatile lighting control through a remote controller and a dedicated phone application via Bluetooth.

4.1 Power On/Off

The light can be turned on or off using the wall switch, the provided remote control, or the mobile application.

4.2 Stepless Dimming and Color Temperature Adjustment

The chandelier supports stepless dimming, allowing you to adjust both brightness and color temperature to create the perfect ambiance.

  • Brightness: Adjustable from 0% (dark) to 100% (bright).
  • Color Temperature: Adjustable across a spectrum from 2700K (warm yellow light) to 6000K (cool white light). Common settings include:
    • Warm Light: Approximately 3000K
    • Neutral Light: Approximately 4000K
    • Cold Light: Approximately 6500K
Image showing stepless dimming from cold to warm light (6500K, 4000K, 3000K) and brightness adjustment, along with features like CRI 80+, eye protection, and no flicker.
Stepless dimming and adjustable color temperatures for various scenes.

4.3 Smart Control (Remote & App)

Use the included remote control or download the designated mobile application (check product packaging or seller information for app details) to access all smart features, including dimming, color temperature changes, and potentially pre-set scenes.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your chandelier.

5.1 Cleaning

  • Always disconnect power before cleaning.
  • For the acrylic lampshade, use a soft, dry, or slightly damp cloth to wipe away dust and smudges. Avoid abrasive cleaners or solvents that could damage the acrylic.
  • For the metal chassis, use a soft, dry cloth. Do not use harsh chemicals.
  • Ensure all parts are completely dry before restoring power.

5.2 Component Details

Close-up view of the chandelier components: Metal Chassis for support and heat dissipation, Acrylic Lampshade for bright and non-dazzling light, and an integrated LED Light Strip.
Key components of the chandelier.
  • Metal Chassis: Provides structural support and aids in heat dissipation for optimal LED performance.
  • Acrylic Lampshade: Designed to provide bright, non-dazzling illumination.
  • LED Light Strip: Integrated LED chips (e.g., 192 pieces for some models) ensure efficient and long-lasting light.

6. Troubleshooting

If you encounter issues with your chandelier, refer to the following common problems and solutions:

  • Light does not turn on:
    • Check the main power supply and wall switch.
    • Ensure all wiring connections are secure as per assembly instructions.
    • Verify the remote control batteries are functional and correctly inserted.
  • Dimming or color temperature not working:
    • Ensure the remote control or mobile app is properly paired with the light.
    • Check for any obstructions between the remote and the light.
  • LED Driver (Transformer) Failure:
    • If the LED driver (e.g., 2.4G Remote palette driver Model(81-100B)x2PF:0.6, Input: 180-265 VAC 50/60 HZ, Output: 65-85VCD 1000mA) fails, the light may not function. Contact customer support with the specific driver specifications for replacement assistance.
  • Lamp resets settings when power is cut:
    • Some smart lights may default to a specific setting (e.g., warm white) when power is cut and restored via a wall switch. For consistent settings, use the remote control or mobile app to turn the light on/off.

7. Specifications

FeatureSpecification
Model NumberXD-1003
Brand NameIRALAN
Item TypeChandeliers
Installation MethodAssembly
Installation TypeFlush Mount
Is Smart DeviceYes
FeaturesRemote controller and phone APP with Bluetooth
Power SourceAC
Voltage90 - 260 V
Is DimmableYes
Light SourceLED bulbs
Is Bulbs IncludedYes
Luminous Flux2000-82000 Lumens (depending on model variant)
Shade TypeFrosted Glass
Shade DirectionDown
FinishBrushed
Body MaterialAluminium Alloy
StyleModern Style
CertificationCE
Base TypeWedge
Switch TypeREMOTE CONTROL
High-concerned chemicalNone
OriginMainland China
CRI80+
FlickerNo Flicker
Package Length31 cm
Package Width31 cm
Package Height13 cm
Package Weight2.15 kg
Diagram showing the dimensions of a 40W chandelier model: 60cm diameter (D) and 9cm height (H). Also lists area coverage (5-15M2), Lumen (3600LM), and CCT options.
Example dimensions and specifications for a 40W model.

8. Warranty and Support

8.1 Warranty

This IRALAN LED Ceiling Chandelier comes with a 3-year warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

8.2 Customer Support

For technical assistance, warranty claims, or replacement parts, please contact the seller or manufacturer directly. You may also refer to the comprehensive user manual available in PDF format for more detailed guides and information.

9. User Tips

  • Consistent Settings: Many smart lights may default to a specific setting (e.g., warm white) when power is cut and restored via a wall switch. For consistent settings, always use the remote control or mobile app to turn the light on/off.
  • Mobile App: The product supports control via a mobile app with Bluetooth. Please refer to the product packaging or the official product page for the specific app name and download instructions.
  • Versatile Lighting: Take full advantage of the stepless dimming and adjustable color temperature features. Experiment with cold white (6500K) for tasks, neutral light (4000K) for general illumination, and warm light (3000K) for relaxation to enhance your living space.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.