1. Introduction
Thank you for choosing the Tollefe Universal Car Phone Holder JR-ZS230. This manual provides detailed instructions for the safe and efficient use of your new car phone holder. Designed for universal compatibility and military-grade protection, this holder ensures your phone remains secure and accessible while driving.

2. Key Features
- Universal Compatibility: Supports all smartphones from 4.0 to 7.0 inches, including those with thick cases (up to 0.8 inches).
- Military-Grade Protection: Features a durable metal screw clip, soft silicone, and premium braided leather for enhanced grip, anti-slip, and heat dissipation.
- 10X Stable Grip: Advanced mechanical lock design ensures your phone stays securely mounted even on bumpy roads.
- One-Hand Operation: Quick lock and release mechanism allows for easy phone placement and removal with a single hand.
- 360° Rotation: Adjustable ball joint allows for optimal viewing angles in both portrait and landscape modes.
- Easy Installation: Designed for quick and simple installation on most car air vents (vertical and horizontal slats).


3. Setup and Installation
The Tollefe Car Phone Holder is designed for quick and easy installation, typically within 15 seconds.
3.1 Package Contents
- 1 x Car phone mount for air vent
- 1 x Air vent clip
- 1 x User manual (this document)
3.2 Installation Steps
- Unscrew the nut from the back of the phone holder.
- Pass the unscrewed nut through the ball head of the air vent clip.
- Tightly push the ball head into the joint on the back of the phone holder until it snaps securely into place.
- Tighten the nut to firmly secure the air vent clip to the phone holder.
- Attach the assembled holder to your car's air vent. Ensure the metal screw clip is tightened for a secure fit.


3.3 Air Vent Compatibility
The holder is compatible with 99% of car A/C vertical and horizontal vents. Please refer to the image below for examples of compatible and incompatible vent types.

4. Operating Instructions
4.1 Placing and Removing Your Phone
- To open the clamp arms, gently press the quick release button located on the back of the holder. The arms will open automatically.
- Place your phone into the holder.
- Squeeze both side arms inwards to firmly clamp your phone.
- To remove your phone, gently press the quick release button again.

4.2 Adjusting Viewing Angle
The holder features a 360° rotatable ball joint. Loosen the nut behind the holder slightly, adjust your phone to any comfortable portrait or landscape angle, and then tighten the nut to secure the position.

4.3 Product Demonstration Video
Watch this video for a visual guide on installation and operation:
5. Maintenance
- Cleaning: Wipe the holder with a soft, damp cloth to remove dust and grime. Avoid using harsh chemicals or abrasive cleaners.
- Inspection: Periodically check the air vent clip and the ball joint for any signs of wear or loosening. Ensure all parts are securely fastened.
- Storage: If not in use for an extended period, store the holder in a cool, dry place away from direct sunlight.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Holder is not stable on the air vent. | Air vent clip not tightened sufficiently or incompatible vent type. | Ensure the metal screw clip is fully tightened. Verify your air vent type is compatible (refer to Section 3.3). |
| Phone slips or is not held securely. | Clamp arms not fully closed or phone size/case thickness exceeds limits. | Ensure the clamp arms are fully closed around your phone. Check if your phone (with case) is within the 4.0-7.0 inch size and 0.8 inch thickness limits. |
| Cannot adjust viewing angle. | Ball joint nut is too tight. | Loosen the nut behind the holder slightly, adjust the angle, then re-tighten. |
7. Specifications
| Attribute | Detail |
|---|---|
| Brand Name | Joyroom |
| Model Number | JR-ZS230 |
| Type | Car Holder |
| Features | No Features (referring to electronic features like charging) |
| Has Speaker | No |
| Compatible Brand | Universal (4.0-7.0 inch phones) |
| Charger | No |
| Origin | Mainland China |
| High-concerned chemical | None |
| Max Phone Thickness (with case) | 0.8 inch |
| Package Length | 14 cm |
| Package Width | 9 cm |
| Package Height | 7 cm |
| Package Weight | 0.159 kg |



8. User Tips
- Many users appreciate the excellent quality and sturdy hitch of this holder, making it a reliable choice for daily use.
- The quick installation and one-hand operation are frequently highlighted as major conveniences.
- Ensure the air vent clip is securely fastened to prevent movement, especially on rough roads.
9. Warranty and Support
For any questions, concerns, or support needs regarding your Tollefe Universal Car Phone Holder JR-ZS230, please contact the seller or manufacturer directly. Keep your purchase receipt for any warranty claims.