SHIMANO SL-TX50

Contents

Shimano SL-TX50 Tourney SIS Bicycle Shift Lever User Manual

Models: 3x6 Speed, 3x7 Speed

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Shimano SL-TX50 Tourney SIS Bicycle Shift Lever. Designed for mountain bikes, this thumb shifter offers reliable gear changes and features an Optical Gear Display for easy monitoring of your current gear position. Please read this manual thoroughly before attempting any installation or operation.

2. Safety Information

  • Please compare the size with your old model before purchasing to avoid purchasing inappropriate sizes.
  • If you have no installation experience, please go to a local bicycle repair shop and let professionals help you install it.

3. Product Overview

The Shimano SL-TX50 Tourney SIS Shift Lever is a robust thumb shifter designed for smooth and intuitive gear changes on mountain bikes. It incorporates the SHIMANO OPTICAL GEAR DISPLAY, providing clear visual feedback on the selected gear at a glance.

Shimano SL-TX50 Tourney SIS Bicycle Shift Lever (various configurations)
Figure 1: Shimano SL-TX50 Tourney SIS Bicycle Shift Lever (various configurations)

The SL-TX50 series supports various speed configurations, including 3x6 speed and 3x7 speed systems, making it versatile for different bicycle setups.

Product Demonstration Video

Video 1: Demonstration of the Shimano SL-TX50 shifter's operation and features.

4. Specifications

FeatureSpecification
Brand NameSHIMANO
Model NumberTX50 (SL-TX50)
Derailleur Groupset TypeMechanical Derailleur system
Shifter TypeThumb Shifter Plus
Compatible RD Type3x6 Speed / 3x7 Speed
Total Capacity6s/7s
Gears18 Speed / 21 Speed (system dependent)
MaterialAlloy
Recommended SL Outer CasingOT-SIS40
Package Length13 cm
Package Width9 cm
Package Height8 cm
Package Weight0.159 kg

5. Setup & Installation

The Shimano SL-TX50 shift levers are designed for handlebar mounting and connect to your bicycle's derailleur system via included gear cables. Proper installation is crucial for optimal performance and safety.

General Installation Steps:

  1. Preparation: Ensure your bicycle's handlebars are clean and free of obstructions where the shifters will be mounted.
  2. Mounting: Position the left (3-speed) and right (6-speed or 7-speed) shifters on the handlebars. Secure them firmly but do not overtighten initially.
  3. Cable Routing: Route the included gear cables from the shifters to the front and rear derailleurs. Ensure cables are routed smoothly without sharp bends or kinks.
  4. Derailleur Connection: Connect the gear cables to the respective derailleurs according to your bicycle's specific setup.
  5. Adjustment: Adjust the cable tension and limit screws on both derailleurs to ensure smooth and precise shifting across all gears. Refer to a comprehensive bicycle repair guide or consult a professional for detailed adjustment procedures.
  6. Final Tightening: Once adjustments are complete and shifting is smooth, securely tighten the shifter clamps on the handlebars.

Important Safety Note:

If you do not have prior experience with bicycle component installation, it is strongly advised to have the shifters installed by a qualified bicycle mechanic to prevent damage to components or potential injury.

Visual Guides for Shifter Types:

SL-TX50 Left lever 3 Speed - top view
Figure 2: SL-TX50 Left Lever (3 Speed) - Top View
SL-TX50 Left lever 3 Speed - bottom view
Figure 3: SL-TX50 Left Lever (3 Speed) - Bottom View
SL-TX50 Right lever 6 Speed - top view
Figure 4: SL-TX50 Right Lever (6 Speed) - Top View
SL-TX50 Right lever 6 Speed - bottom view
Figure 5: SL-TX50 Right Lever (6 Speed) - Bottom View
SL-TX50 Right lever 7 Speed - top view
Figure 6: SL-TX50 Right Lever (7 Speed) - Top View
SL-TX50 Right lever 7 Speed - bottom view
Figure 7: SL-TX50 Right Lever (7 Speed) - Bottom View
SL-TX50 Right lever 7 Speed - side view
Figure 8: SL-TX50 Right Lever (7 Speed) - Side View

For more detailed installation instructions, please refer to the official Shimano technical documentation, which may be available as a PDF. A general user manual PDF is available here.

6. Operation

The Shimano SL-TX50 utilizes a "Thumb Shifter Plus" mechanism for intuitive gear changes. The left shifter controls the front derailleur (3 speeds), and the right shifter controls the rear derailleur (6 or 7 speeds).

Shifting Gears:

  • Upshifting (to a higher gear/smaller cog): Press the smaller lever with your thumb to shift to a higher gear.
  • Downshifting (to a lower gear/larger cog): Press the larger lever with your thumb to shift to a lower gear.
  • Optical Gear Display: The integrated display provides a clear visual indication of your current gear position, allowing you to quickly assess your gearing without looking down at the cassette or chainrings.

Always ensure you are pedaling lightly when shifting gears to allow for smooth transitions and prevent strain on your drivetrain components.

7. Maintenance

Regular maintenance will ensure the longevity and optimal performance of your Shimano SL-TX50 shift levers.

  • Cleaning: Keep the shifters clean from dirt and grime. Use a damp cloth to wipe down the exterior. Avoid using harsh chemicals that could damage the plastic or paint.
  • Lubrication: Periodically apply a small amount of bicycle-specific lubricant to the pivot points of the levers and the exposed sections of the gear cables. This helps maintain smooth operation and prevents corrosion.
  • Cable Inspection: Regularly inspect the gear cables for fraying, kinks, or corrosion. Damaged cables should be replaced immediately to ensure reliable shifting.
  • Housing Inspection: Check the outer cable housing for cracks or damage. Damaged housing can impede cable movement and affect shifting performance.
  • Tightness Check: Periodically check that the shifter clamps are securely tightened on the handlebars.

8. Troubleshooting

If you encounter issues with your SL-TX50 shift levers, consider the following common problems and solutions:

ProblemPossible CauseSolution
Difficulty shifting / Slow shifting
  • Incorrect cable tension
  • Friction in cables/housing
  • Dirty/worn derailleurs
  • Adjust barrel adjusters on shifters or derailleurs.
  • Lubricate cables or replace if severely worn/frayed.
  • Clean and lubricate derailleurs; inspect for wear.
Chain skips gears
  • Incorrect limit screw adjustment
  • Bent derailleur hanger
  • Worn chain/cassette
  • Adjust derailleur limit screws.
  • Inspect and straighten/replace derailleur hanger.
  • Replace worn drivetrain components.
Shifter feels stiff or sticky
  • Lack of lubrication
  • Internal grime/debris
  • Apply lubricant to shifter mechanism.
  • Clean shifter internals (may require disassembly by a professional).

For persistent issues, consult a professional bicycle mechanic.

9. User Tips

  • Cable Length: When replacing shifters or cables, ensure the new gear cables are of appropriate length for your bicycle frame and routing to avoid excess slack or tension. The included cable length is typically standard for most setups, but always verify.
  • Pre-Ride Check: Before each ride, quickly check that your gears shift smoothly and accurately. This can prevent issues during your ride.

10. Warranty & Support

For information regarding warranty coverage, technical support, or replacement parts, please refer to the official Shimano website or contact your authorized Shimano dealer. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.