1. Introduction
Thank you for purchasing this product. This manual provides essential information for the safe and effective use of your Simagic P-SRH/P-SRB Sim Ray RGB accessories for SIM Racing Pedals. This guide covers general operating instructions applicable to consumer electronics and instruments. For detailed technical specifications or specific model information not covered here, please refer to the official PDF manual or contact customer support.
1.1 Basic Product Information
| Category | Details |
|---|---|
| Product Series | Consumer electronics/instruments |
| Applicable Models | Simagic P1000 & P1000i SIM Racing Pedals (P-SRH), Simagic P1000 SIM Racing Pedals (P-SRB) |
| Manufacturer | Shenzhen Bagul Technology Co., Ltd |
| EU Responsible Person | Apex CE Specialists GmbH, Habichtweg 1 41468 Neuss Germany |
2. Product Variants
This product is available in two main variants, each designed for specific applications with Simagic pedals:
2.1 Simagic P-SRH Sim Ray RGB Heel Stop
The P-SRH RGB Heel Stop is designed to provide telemetry data feedback and customizable RGB lighting. This allows for dynamic visual cues, such as red flashes when braking and green when accelerating, enhancing your SIM racing experience.
Figure 1: Simagic P-SRH RGB Heel Stop with mounting hardware.
Figure 2: Angled view of the P-SRH RGB Heel Stop.
Figure 3: Rear view of P-SRH showing the cable connection point.
Figure 4: Close-up of the P-SRH cable connection.
Figure 5: Top view of the P-SRH RGB Heel Stop.
2.2 Simagic P-SRB Sim Ray RGB Bottom Light Bar
The P-SRB RGB Bottom Light Bar also supports telemetry data feedback and customizable lighting colors, providing visual feedback like red for braking and green for throttle. Important Note: The P-SRB is not compatible with the P1000i inverted pedal setup.
Figure 6: Simagic P-SRB RGB Light Bar, showing illumination and compatibility note.
Figure 7: Rear view of P-SRB showing the cable connection.
3. Safety Warnings
Before using this product, please read and comply with all safety instructions to prevent damage or injury.
3.1 Electrical Safety
- Use only the power adapter provided with the product or a compliant power supply.
- Do not use the product in humid environments unless it specifically states a waterproof rating.
- If the power cord is damaged, discontinue use immediately and contact us for a replacement.
- Always disconnect the power before cleaning the product.
3.2 Usage Environment
- Operating temperature range: -10°C to 40°C (subject to model specifications).
- Avoid direct sunlight, high temperatures, and dusty environments.
- Ensure good ventilation and do not block heat dissipation holes.
3.3 Operational Safety
- Do not disassemble or modify the product yourself, as there are no user-repairable parts inside.
- Prevent liquid from entering the product interior.
- If the product emits smoke, unusual odors, or abnormal noise, immediately disconnect the power and contact after-sales service.
4. Setup
4.1 Unpacking Inspection
- After opening the package, please check that all items are complete and undamaged.
- If you find any items missing or damaged, please contact customer service immediately.
4.2 First Use
- Ensure the product is fully charged before initial use (if applicable).
- Verify that the power supply voltage is consistent with the product specifications (AC100-240V, 50/60Hz, applicable worldwide).
5. Operating Instructions
5.1 Basic Operations
- Power On/Off: Press and hold the power button for approximately 3 seconds to turn the device on or off.
- Function Selection: Short press the mode button to switch between available functions.
- Display Screen: The display screen (if present) will show the current value or status of the device.
5.2 RGB Lighting and Telemetry Feedback
- Both P-SRH and P-SRB models support telemetry data feedback from your SIM racing setup.
- Lighting colors are customizable and can react dynamically to in-game events, such as flashing red during braking and green during throttle application. Refer to your SIM racing software or Simagic documentation for configuration details.
6. Maintenance and Care
- Cleaning: Wipe the outer casing with a soft, dry cloth. Do not use chemical solvents, as these may damage the finish or internal components.
- Storage: When not in use for an extended period, clean the product and store it in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery (if applicable): If your product contains a battery and will not be used for an extended period, please remove the battery to prevent leakage and potential damage.
7. Troubleshooting Common Problems
| Problem | Possible Reasons | Solution |
|---|---|---|
| Unable to power on | Power not connected / Battery depleted | Check the power connection, charge the device, and try again. |
| No display / Display error | Poor connection / Incorrect settings | Restart the device and check all connections. |
| Inaccurate measurement values (instrument-related) | Range error / Calibration required | Confirm the measurement range and contact calibration services if necessary. |
| Other faults | Undetermined issue | Contact customer service for technical support. |
8. Technical Specifications
| Parameter | Value / Range | Remark |
|---|---|---|
| Model Number | P-SRB/P-SRH | |
| Input Power | AC100-240V, 50/60Hz or DC5V/9V/12V | Please refer to the product label. |
| Operating Temperature | -10°C ~ 40°C | |
| Storage Temperature | -20°C ~ 60°C | |
| Protection Level | IP20 (for indoor use) | Except for waterproof models. |
| Material | Metal | |
| For Vehicle Type | Cars | |
| Use | Vehicles & Remote Control Toys | |
| Recommended Age | 14+ years | |
| Quantity | 1 pcs | |
| Is Electric | No battery | |
| Batteries Included | No | |
| Tool Supplies | Cutting | |
| Four-wheel Drive Attributes | Assemblage | |
| Remote Control Peripherals/Devices | Servos | |
| Upgrade Parts/Accessories | Hydraulic Transmission Box | |
| RC Parts & Accs | Spinners |
8.1 Applicable Standards (for reference)
This product series is designed with reference to the following standards:
- Electrical safety: EN 61010-1
- Electromagnetic compatibility: EN 61326-1
- Specific requirements are subject to the conformity declaration corresponding to the model number.
9. Warranty and Support
9.1 Warranty Policy
The warranty period is typically 12 to 24 months from the date of purchase, subject to specific store announcements.
9.2 Technical Support
For detailed technical documentation, calibration certificates, or hard copies of the manual, please contact us via AliExpress internal message or email at wishcolor@126.com. Response time is typically within 24 hours on working days.
An official user manual (PDF) is available for this item. You can find it by searching for "Item guides & documents" on the product page or by contacting support.
10. User Tips
No specific user tips are available at this time. Please refer to the operating instructions and troubleshooting guide for optimal use.
11. EU Compliance Information
11.1 CE Declaration of Conformity
This product complies with the essential requirements of the following EU directives:
- Low Voltage Directive (LVD) 2014/35/EU
- Electromagnetic Compatibility Directive (EMC) 2014/30/EU
- RoHS Directive 2011/65/EU
11.2 Waste Electrical and Electronic Equipment (WEEE)
The wheeled bin symbol marked with an X on the product indicates that, according to EU Directive 2012/19/EU, this product must not be disposed of as unsorted municipal waste. It must be collected and recycled separately to protect the environment and human health.
12. Disclaimer
This instruction manual is a general version; the actual product functions and parameters shall prevail. The manufacturer reserves the right to change product designs and specifications without prior notice.