Fcar F802

Contents

Fcar F802 Heavy Duty Truck Scanner

User Manual

1. Introduction

The Fcar F802 is a high-definition truck diagnostic scanner designed for heavy-duty vehicles. Equipped with a quad-core processor and a 5-inch LCD touchscreen, this tool specializes in DPF regeneration and maintenance light reset functions, particularly for the American diesel truck market. It supports comprehensive diagnostics for most 12V/24V diesel-powered trucks, allowing users to read and clear fault codes, access live data streams, and analyze real-time sensor data across various vehicle systems. The F802 is built for mechanics, DIY enthusiasts, and anyone seeking an efficient and user-friendly diagnostic solution, aiming to save time and money on vehicle maintenance.

Fcar F802 Heavy Duty Truck Scanner device
Fcar F802 Heavy Duty Truck Scanner

2. Safety Information

Please read all instructions carefully before operating the device. Failure to do so may result in damage to the device or vehicle, and personal injury.

  • Always perform automotive testing in a safe environment.
  • Wear safety eye protection that meets ANSI standards.
  • Keep clothing, hair, hands, tools, test equipment, etc., away from all moving or hot engine parts.
  • Operate the vehicle in a well-ventilated work area; exhaust gases are poisonous.
  • Put blocks in front of the drive wheels and never leave the vehicle unattended while running tests.
  • Use extreme caution when working around the ignition coil, distributor cap, ignition wires, and spark plugs. These components create hazardous voltages when the engine is running.
  • Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.
  • Do not connect or disconnect any test equipment while the ignition is on or the engine is running, unless instructed to do so.
  • Keep the scanner dry and clean.

3. Package Contents

The F802 package typically includes the following items:

  • 1x Fcar F802 Diagnostic Scanner Unit
  • 1x Packing Box
  • 1x User Manual
  • 1x 6-pin & 9-pin Connector for Trucks
  • 1x 16-pin OBD2 Connector for Cars
F802 Package Contents: scanner, manual, connectors
F802 Package List

4. Product Overview

The Fcar F802 is a robust diagnostic tool designed for both heavy-duty trucks and 12V passenger vehicles. It features a durable casing and an intuitive touchscreen interface.

4.1. Key Features

  • DPF Regeneration & Service Reset: OEM-level functionality for major truck brands like Cummins, Detroit, Caterpillar, International, Volvo, Hino, Isuzu, and Fuso.
  • Standard Diesel OBD & OBDII Protocols: Supports the latest J27145 HD OBD protocols for heavy-duty vehicles and standard OBDII protocols for 12V cars.
  • All System Diagnostic: Capable of reading and clearing trouble codes from all major truck systems including engine, transmission, ABS, SRS, and more.
  • User-Friendly Operations: Features one-click screenshot, update, printing, and feedback.
  • "Simulate" + "DEMO" Menu: Provides simulated data and operational steps for better understanding of functions.
  • Lifetime Free Update: Ensures the device always has the latest software and vehicle coverage.
Fcar F802 with connectors and key features
Fcar F802 device and included connectors

4.2. Hardware Parameters

Component Specification
CPU Quad-Core ARM Cortex-A7
RAM 1GB
Flash 8GB
Display 5 inches LCD, resolution 800*480
WIFI 802.11b/g/n 2.4GHz
USB Interface Type C interface
Diagnose Interface DB15 interface
Operating Voltage DC 10V~36V/3A
Printer Optional (sold separately)
Hardware parameters diagram for Fcar F802
F802 Hardware Parameters

5. Setup and Activation

5.1. Device Activation

Follow these steps to activate your F802 scanner:

  1. Plug the F802 into the OBD port of your vehicle and turn the ignition on. The device will automatically start up.
  2. Connect to a Wi-Fi network: Go to Settings > WIFI and select your network.
  3. Once successfully connected to Wi-Fi, go to Settings > Activation and tap "Activate".

Note:

  • If an "Activation failed" prompt appears, verify your network connection.
  • No registration is required; simply click activate to use the device.

5.2. Connection Modes

The F802 supports two primary connection modes depending on the vehicle type:

  • Standard OBD-II Interface (for 12V cars): For 12V passenger vehicles, enter the "OBD-II" menu. Use the integrated main test line OBD connector; no other connectors are needed.
  • Diesel 6/9 PIN Interface (for heavy-duty trucks): For heavy-duty trucks, enter the "Diesel OBD" menu. You will need to connect the main test line with the corresponding 6-pin or 9-pin special connector.
Fcar F802 performing OBD2 diagnostic for cars and trucks
Fcar F802 performing OBD2 diagnostic for cars and trucks

6. Operating Instructions

6.1. DPF Regeneration & Service Reset

The F802 provides OEM-level DPF functions for various heavy-duty truck brands. DPF regeneration is crucial for clearing Particulate Matter (PM) from the DPF filter, maintaining filter performance, and improving fuel efficiency.

DPF Regeneration Functions include:

  • DPF regeneration
  • DPF reset
  • BlueTec
  • DPF related information reset
  • DPR state reset
  • Forced DPR regeneration
  • Differential pressure check
  • DPD forced regeneration

DPF regeneration may be necessary if:

  • The exhaust back pressure sensor is replaced.
  • The PM trap is removed or replaced.
  • The fuel additive nozzle is removed or replaced.
  • The catalytic oxidizer is removed or replaced.
  • The DPF regeneration MIL (Malfunction Indicator Lamp) is on and maintenance is performed.
  • The DPF regeneration control module is replaced.
DPF Forced Regeneration & Reset Tool diagram
DPF Forced Regeneration & Reset Tool for Cummins, Caterpillar, Detroit, International, Volvo, Isuzu, Fuso, Hino

Service Reset (for Isuzu, Fuso): This function allows you to reset maintenance lights after replacing relevant parts. This ensures accurate tracking of component lifespan and maintenance schedules.

Oil Service Reset for Isuzu and Fuso
Oil Service Reset for Isuzu and Fuso

6.2. All System Diagnostic for Trucks

The F802 can diagnose all major systems in heavy-duty trucks, supporting standard OBD protocols including SAE J1939 and SAE J1708. This allows you to read and clear trouble codes, view live data, and perform various tests across the vehicle's electronic control modules.

Supported Systems include:

  • Power Transmission: Engine, Construction engine, Hybrid, VCS (Vehicle Computer Simulation), Transmission, Integrated Control, Integrated Security System, Motor Control, Battery/SCR.
  • Chassis: Anti-lock braking system (ABS), EZGOC (Wheel Brake Special System), Retarder.
  • Carbody: Immobilizer, SRS Airbag, SWS (Smart Writing System), Headlamp Auto-leveling, ASR, EBS, ESCOT, ESP, EPS, AT System, Smoother, HSA/CFS, BCM, BCM(MIMAMORI), VIM (Vehicle Interface Module), UDS, Gas Treatment, DCU/BCU, Instrument System, Suspension System, Pro-shift, Inverter, Kneeling, Drivetrain, Scanning Cruise/LDWS/PCS, Tire Pressure Monitoring System, Idling Stop System, Clutch System, Anti-theft devices, Blocker, PESS (Passive entry and start system), PIM (Powertrain interface module), Chassis ESC, Air Suspension.
Full Systems Diagnostic for Trucks and Diesels
Full Systems Diagnostic for Trucks and Diesels
OE-Level Multi-Systems Diagnosis for Engine, ABS, SRS, SAS, ESP, TPMS, EPB
OE-Level Multi-Systems Diagnosis

6.3. OBDII Check for 12V Vehicles

The F802 also functions as an OBD2 scanner for 12V passenger vehicles (US-based 1996+, EU-based 2002+, Asian-based 2005+). It can diagnose all OBD2 modules of the engine.

OBDII Functions include:

  • Read and clear fault codes, turn off Malfunction Indicator Light (MIL).
  • O2 sensor test to check fuel efficiency and vehicle emission.
  • Display freeze frame data and retrieve vehicle information.
  • EVAP test for fuel tank system (Carbon canister test).
  • Show live data in graph format (e.g., Engine Speed, ECU temperature, coolant temperatures). Live data can be stored and played back.
  • Display I/M readiness status (Non-continuously monitored system test).
  • Request On-Board Monitoring test results for specific monitored systems.
  • Provide DTC Lookup function.
OBDII Check for 12V passenger vehicles
OBDII Check for 12V passenger vehicles

6.4. Additional Functions

The F802 is designed with several user-friendly features to enhance your diagnostic experience:

  • One-click Screenshot: Save important diagnostic information instantly. Screenshots are accessible in "DATA MANAGEMENT".
  • One-click Printing: Print diagnostic reports (vehicle information, fault codes, data streams) and software interfaces. (Note: Printer is sold separately).
  • One-click Feedback: Submit diagnostic problems directly to Fcar's technical team for support.
  • One-click Upgrade: Connect to Wi-Fi, and the device will automatically search for and install the latest updates, ensuring you always have the most current software.
  • Pin Detect: Measures the voltage of the 16-PIN OBD diagnostic interface and identifies the pin positions of K-line and CAN line. Access this function via Main Interface > Tools > Pin Detection.
  • "Simulate" + "DEMO" Menu: Explore simulated data and operational steps based on actual vehicle tests to understand functions better.
Fcar F802 PRO Upgrade features
Fcar F802 PRO Upgrade features including protocols and screen size

Video: Overview of Fcar F802 features and interface.

7. Maintenance

7.1. Software Updates

The F802 supports lifetime free online updates. To update the software, ensure the device is connected to Wi-Fi, then navigate to the One-click Upgrade function. The device will automatically detect and install the latest software versions, including new car models and bug fixes.

7.2. Cleaning and Storage

  • Keep the device clean and dry. Use a soft, damp cloth to wipe the screen and casing. Avoid abrasive cleaners or solvents.
  • Store the device in its original packing box or a protective case when not in use to prevent damage.
  • Avoid exposing the device to extreme temperatures, direct sunlight, or high humidity.

8. Troubleshooting

  • "Activation failed" prompt: Check your Wi-Fi network connection to ensure it is stable and active.
  • ECU no response during Pin Detect: If the test requires ECU response and none is detected, verify that the diagnostic interface has voltage.
  • General diagnostic problems: Utilize the One-click Feedback function to send details of your issue to Fcar's technical support team for assistance.

9. User Tips

  • 24V Vehicle Compatibility: The Fcar F802 is designed to work with both 12V and 24V diesel-powered trucks, making it versatile for a wide range of heavy-duty applications.
  • Utilize DEMO Mode: Before performing actual diagnostics, explore the "Simulate" or "DEMO" menu to familiarize yourself with the software's functions and operating steps using pre-saved vehicle test data.
  • Regular Updates: Take advantage of the lifetime free updates to ensure your scanner supports the latest vehicle models and diagnostic protocols.

10. Warranty and Support

The Fcar F802 comes with a lifetime free update policy. For technical support, warranty inquiries, or any issues encountered with the device, please contact the seller directly through buyer-seller messages. Provide detailed information about your issue to receive prompt and effective solutions from the professional technical team.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.