Aqara S3 Thermostat

Contents

Aqara Smart Thermostat S3 User Manual

Model: S3 Thermostat (ZNWKQ11LM) | Brand: Aqara

Introduction

The Aqara Smart Thermostat S3 is an advanced 3.95-inch touch screen panel designed for intelligent climate control in your home. It supports voice and remote control, senses temperature and humidity, and integrates seamlessly with Apple HomeKit and Aqara Home ecosystems. This manual provides essential information for the safe and efficient use of your thermostat.

Aqara S3 Thermostat main product view with Apple HomeKit and 1 Year Warranty badges

Figure 1: Aqara Smart Thermostat S3

Important Safety Information

  • Ensure power is disconnected before installation or maintenance to prevent electric shock.
  • Installation should be performed by a qualified electrician or professional.
  • Do not expose the device to water or extreme humidity.
  • Operate the device within its specified temperature and humidity ranges.
  • Keep out of reach of children.

Setup Instructions

Prerequisites

The Aqara Smart Thermostat S3 requires a Zigbee 3.0 gateway to function. Compatible gateways include:

  • Aqara Gateway M1S
  • Aqara Gateway M2
  • Aqara Air Conditioning Companion P3
  • Aqara Smart Camera G2H

The device supports Apple HomeKit and Aqara Home apps. Please note that the Mijia APP is not supported. When setting up, ensure your region is set to China mainland.

Compatibility notice for Aqara S3 Thermostat, detailing required Zigbee 3.0 gateways and supported apps

Figure 2: Gateway and App Compatibility

Wiring

The thermostat is powered by a zero live wire. Connect the device to the corresponding relay wiring port based on the type of external equipment (e.g., water system fan coil units, central air conditioning, water floor heating, fresh air fans).

Detailed wiring diagram for the Aqara S3 Thermostat, showing connections for various HVAC systems

Figure 3: Wiring Diagram

Adding Device to App

  1. Download the Aqara Home App from your device's app store.
  2. Ensure the device is powered with the zero live wire connected.
  3. Open the Aqara Home App.
  4. Click the "+" icon in the upper right corner to add a new device.
  5. Select "Smart Thermostat S3" from the device list.
  6. Follow the on-screen prompts in the App to connect the device to your network.
  7. Once added, the new device will appear in your device list, ready for control.

Operating Instructions

Touch Screen Interface

The Aqara S3 Thermostat features a 3.95-inch touch LCD screen for direct control. You can adjust settings, switch modes, and view weather and time information with simple taps and swipes.

Diagram highlighting the full-screen smart control of the Aqara S3 Thermostat, emphasizing touch and swipe gestures

Figure 4: Touch Screen Control

Voice Control

The thermostat supports voice control through compatible smart assistants like Siri (via Apple HomeKit). Use simple voice commands to adjust temperature, change modes, or inquire about current settings.

Remote Control (App)

Using the Aqara Home App, you can remotely control your thermostat from anywhere. This includes adjusting temperature, switching modes, and setting schedules. The app also allows for remote monitoring of temperature and humidity.

Diagram showing remote control via the Aqara Home App and voice control integration with Siri

Figure 5: App and Voice Control

Operating Modes

The thermostat supports various operating modes to suit your comfort needs:

  • Cooling: For lowering room temperature.
  • Air Supply: Circulates air without heating or cooling.
  • Air Conditioning Heating: For heating using your AC system.
  • Floor Heating: For heating using your floor heating system.
  • Air Conditioning + Floor Heating: Combines both heating methods.
  • Fresh Air: Controls fresh air ventilation systems.
Diagram illustrating the Aqara S3 Thermostat's compatibility with various HVAC systems

Figure 6: Supported HVAC Systems

Scenario Correlation

The S3 Thermostat can be integrated into various smart home scenarios for automated control. For example, set up an 'Away' mode to automatically turn off climate control, lights, and close curtains when you leave, and an 'Arrive Home' mode to activate them before you return.

Diagram demonstrating automated home/away scenarios

Figure 7: Automated Home/Away Scenarios

You can also create 'Sleep' scenarios that monitor air quality (TVOC) and automatically activate fresh air systems if needed, ensuring a comfortable sleeping environment.

Diagram illustrating scene card switching for sleep mode, including air quality monitoring and fresh air activation

Figure 8: Sleep Mode Scenario

Temperature and Humidity Sensing

The thermostat has a built-in temperature and humidity sensor, allowing for automatic temperature control and maintaining optimal indoor climate conditions.

Diagram showcasing whole-house smart linkage for constant temperature, humidity, and oxygen levels

Figure 9: Whole-House Smart Linkage

User Tips

  • Language Setting: The current version of the S3 Thermostat primarily supports Chinese. You can set the product language to Chinese within the device settings.
  • Gateway Requirement: Always ensure your thermostat is connected to a compatible Zigbee 3.0 gateway (Aqara M1S, M2, P3, or G2H) for full smart functionality and remote control.

Maintenance

  • Cleaning: Gently wipe the screen and body of the thermostat with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Software Updates: Periodically check the Aqara Home App for firmware updates to ensure optimal performance and access to new features.

Troubleshooting

ProblemPossible CauseSolution
Thermostat not responding to commands.No power, or not connected to a gateway.Check power supply. Ensure the thermostat is properly paired with a compatible Zigbee 3.0 gateway.
Cannot control via App.Thermostat not connected to the network, or using an unsupported app.Verify network connection. Ensure you are using the Aqara Home App or Apple HomeKit. Mijia APP is not supported.
Language is not English.The current version is primarily for the CN market.The device currently supports Chinese language only. Please adjust your expectations accordingly.
Inaccurate temperature/humidity readings.Sensor obstruction or placement in an unsuitable environment.Ensure the sensor is not covered and the thermostat is not placed near heat sources, direct sunlight, or drafts.

Specifications

FeatureDetail
ModelZNWKQ11LM
Brand NameAqara
Power SourceAC
Battery IncludedNo
Inbox AdaptorNo
Wireless CommunicationYes
Communication MethodZigbee 3.0
State of AssemblyReady-to-Go
CertificationCE
OriginMainland China
Dimensions (L x W x H)10cm x 10cm x 10cm (approximate)
Weight0.4 kg (approximate)

Note: Dimensions and weight are approximate package values.

Diagram showing the dimensions of the Aqara S3 Thermostat

Figure 10: Product Dimensions

Warranty and Support

The Aqara Smart Thermostat S3 comes with a 1-year warranty. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or visit the official Aqara support website.

Video 1: Aqara S3 Thermostat Product Demonstration


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.